Fabrication and Thermal Dissipation Properties of Carbon Nanofibers Derived from Electrospun Poly(Amic Acid) Carboxylate Salt Nanofibers

Polyimides (PIs) possess excellent mechanical properties, thermal stability, and chemical resistance and can be converted to carbon materials by thermal carbonization. The preparation of carbon nanomaterials by carbonizing PI‐based nanomaterials, however, has been less studied. In this work, the fabrication of PI nanofibers is investigated using electrospinning and their transformation to carbon nanofibers. Poly(amic acid) carboxylate salts (PAASs) solutions are first electrospun to form PAAS nanofibers. After the imidization and carbonization processes, PI and carbon nanofibers can then be obtained, respectively. The Raman spectra reveal that the carbon nanofibers are partially graphitized by the carbonization process. The diameters of the PI nanofibers are observed to be smaller than those of the PAAS nanofibers because of the formation of the more densely packed structures after the imidization processes; the diameters of the carbon nanofibers remain similar to those of the PI nanofibers after the carbonization process. The thermal dissipation behaviors of the PI and carbon nanofibers are also examined. The infrared images indicate that the transfer rates of thermal energy for the carbon nanofibers are higher than those for the PI nanofibers, due to the better thermal conductivity of carbon caused by the covalent sp² bonding between carbon atoms.     

Making reusable reaction-bonded silicon nitride crucibles for silicon casting from kerf-loss silicon waste

Silicon kerf loss during wafer slicing and the broken quartz crucibles after silicon casting are two major solid wastes from photovoltaic (PV) industry. Especially, the recycle of kerf-loss silicon has become an urgent issue because near 100 000 t of solid wastes are generated every year. One of the most meaningful recycle routes of the kerf-loss silicon is to make silicon nitride crucibles to replace the quartz crucibles. In this study, we demonstrated how this is feasible through acid leaching refining, slip casting, and nitridation. The reaction-bonded silicon nitride (RBSN) crucibles after oxidation were found pure enough for silicon ingot growth. More importantly, they could be reused after ingot growth. With the present examples, the potential of using the kerf-loss silicon for fine ceramics is prominent.     

Separation of gamma-globulins from porcine plasma by reversed micellar extraction

Factors affecting the separation of gamma-globulins from porcine plasma using reversed micelles were screened based on a fractional factorial design. The optimal processing conditions for obtaining the maximum yield of gamma-globulins under various constraints of product purity were determined using response surface methodology (RSM) and nonlinear programming. Results showed that the pH and sodium chloride concentration of the aqueous phase, and the concentration of surfactant (bis-(2-ethylhexyl) sulfosuccinate sodium salt, AOT) of the organic phase were the most important factors affecting the extraction performance. An eighty-five percent product purity and ninety-seven percent yield were obtained under the extraction conditions of 400 mM NaCl, 350 mM AOT, and pH 7.0. The extract exhibited immunological reactivity against anti-pig IgG.     

Biotransformation of ginsenoside Rd in the ginseng extraction residue by fermentation with lingzhi (Ganoderma lucidum)

Ginseng and lingzhi (Ganoderma lucidum) both are valuable traditional Chinese medicines and have been extensively utilised in functional foods and traditional medicines in many Asian countries. However, massive quantity of ginseng residue is produced after extraction of ginseng which still contains a lot of bioactive compounds such as ginsenosides. The goal of this study was to reuse the American ginseng extraction residue as the fermentation medium of G. lucidum to produce bioactive ginsenoside enriched biotransformation products. The changes of ginsenosides in the fermentation products were analysed during fermentation. Our results showed that after 30 days of fermentation, ginsenoside Rg1, Rd, and compound K (CK) significantly increased, especially Rd, while other ginsenosides (Re, Rb1 and Rc) decreased during fermentation. Ginsenoside Rd is the major ginsenoside in the final fermentation product. Furthermore, the biotransformation of ginsenosides was the major reaction in this fermentation process.     

Antioxidant potentials of buntan pumelo (Citrus grandis Osbeck) and its ethanolic and acetified fermentation products

The antioxidant potentials of buntan pumelo (Citrus grandis Osbeck) and its fermented products were determined. The essential oil from peel had higher total phenolic (214 mM) and flavonoid (134 mg QE/g of dried material) contents than those of different solvent extracts from fruit pulp. In addition, DPPH free radical-scavenging activity and ferric-reducing antioxidant power values determined for the essential oil were 26.1 ± 1.2% and 2.3 ± 0.3 mM, respectively, which were significantly higher than those of various fruit pulp extracts. The ethanol-fermented products of pumelo juice had higher total phenolic and flavonoid contents than those of fresh juice. For maintenance of the substantial antioxidant properties of pumelo products, ethanol-fermented juice rather than fresh or acetate-fermented juice is recommended. Through correlation analysis, the phenolic compounds in the fermented pumelo products were found to be the major contributors to the free radical-scavenging activity and ferric-reducing power.     

Induction of cell apoptosis in 3T3-L1 pre-adipocytes by flavonoids is associated with their antioxidant activity

Obesity is biologically characterized at the cellular level by an increase in the number and size of adipocytes differentiated from fibroblastic pre-adipocytes in adipose tissue. In this study, we focused on the relationship between the influence of flavonoids on cell population growth and their antioxidant activity. The results showed that the inhibition of flavonoids (naringenin, rutin, hesperidin, resveratrol, naringin and quercetin) on 3T3-L1 pre-adipocytes was 28.3, 8.1, 11.1, 33.2, 5.6 and 71.5%, respectively. In oxygen radical absorbance capacity (ORAC) assay, quercetin had the highest ORAC(ROO) value among the six flavonoids tested. Apoptosis assays showed that quercetin increased apoptotic cells in time- and dose-dependent manner. Treatment of cells with quercetin decreased the mitochondrial membrane potential in the courses of time and dose. The cell apoptosis/necrosis assay showed that quercetin increased the number of apoptotic cells, but not necrotic cells. Quercetin treatment of cells caused a significant time- and dose-dependent increase in the caspase-3 activity. Western analysis indicated that treatment of quercetin markedly down-regulated PARP and Bcl-2 proteins, and activated caspase-3, Bax, and Bak proteins. These results indicate that quercetin efficiently inhibits cell population growth and induction of apoptosis in 3T3-L1 pre-adipocytes.     

Stability of Molybdenum Disilicide in Combustion Gak Environments

The stability of MoSi₂ in combustion gas at 1370° and 1600°C was evaluated using SOLGASMIX-PV thermodynamic modeling, periodic weight measurements, and characterization via XRD, SEM, EDS, and image analysis. Passive oxidation occurred at both temperatures. During an initial stage of exposure, specimen surfaces oxidized to form MoO_3(g) and amorphous SiO₂ via reduction of CO₂ and H₂O. After a short time (<6.5 min at 1370°C, <1 min at 1600°C), the oxidation mechanism switched; Mo₅Si₃ and amorphous SiO₂ formed as oxidation products. The first mechanism esulted in the formation of 46.1 vol% at 1370°C and 42.6 vol% at 1600°C of the amorphous silica surface coating. The attainment of a near-terminal weight gain implied silica formation was limited by H₂O and CO₂ diffusion through the silica coating.     

Synthesis of porous carbon and silica spheres using PEO-PF polymer blends

In this paper, we performed a physical mixture of PEO and PF polymers (i.e. a polymer blend) as an organic template for synthesizing PF-PEO-silica homogeneous composites in a dilute silicate solution at pH = 4.0–5.0. The PF-PEO-silica composites exhibit spherical morphology, in micrometer dimension, and the sphere size is dependent on the pH value of the solution. After undergoing calcination to remove the organic part of the PF-PEO-silica composites with and without the hydrothermal treatment, porous silica spheres of different pore sizes were obtained. Due to the existence of the carbonizing PF polymer in the PF-PEO-silica composite, porous carbon spheres can be conveniently obtained from pyrolysis of the PF-PEO-silica composites under a N₂ atmosphere and HF-etching procedures. TEM images demonstrate that the mesostructures of the mesoporous silica and porous carbons are disordered.