储罐中缓蚀剂的应用方法

缓蚀技术是减轻石油化学工业中各类油、气、水储罐内腐蚀的有效方法,但国内目前应用尚不普遍,原因之一是尚未找到较适宜的加入方法,使缓蚀剂的应用可以经济地和长时间地起作用,本文综述了储罐内缓蚀剂的各种应用技术,重点介绍在涂层中加缓蚀剂的技术,基于其溶解性或离子置换特性,在实际使用时缓蚀剂可持久、稳定地释放出来。这后一类技术可能是在储罐内应用缓蚀剂的最好方式之一。     

Validation of a specific selection criterion for dental periapical radiography

We report three children with hemidystonia in whom anti-cardiolipin (aCL) antibodies were demonstrated. Systemic lupus erythematosus was excluded on the basis of both clinical and serological criteria, and the diagnosis of primary antiphospholipid syndrome (PAPS) was made. In two cases, aCL antibodies could be causally related to a presumed immune-mediated thrombotic event involving the basal ganglia as shown by magnetic resonance imaging (MRI). In the remaining patient the finding of white matter alteration on NMR might be due to cross-reactivity of anti-phospholipid (aPL) antibodies with cerebral phospholipids, resulting in demyelination. We suggest that PAPS must always be considered when isolated or recurrent focal cerebral ischaemia, and particularly hemidystonia, occur in childhood.     

A comparative evaluation of two sensitive serum neutralization tests for bovine herpesvirus-1 antibodies

The need for frequent injections and monitoring, the possibility of multiple gestations, and the higher cost compared to clomiphene citrate, prevents many clinicians from using human menopausal gonadotrophin (HMG) for ovulation induction. A sequential medication regimen, in which HMG is taken after clomiphene, overcomes these problems. We retrospectively compared per cycle fecundity and birth rates in 119 cycles of clomiphene-HMG, 524 cycles of clomiphene alone, 57 cycles of HMG alone, and 79 cycles of concurrent HMG and clomiphene in patients receiving intra-uterine insemination (IUI), who were free of endometriosis or tubal disease. Per cycle fecundity for clomiphene-HMG was 22% [95% confidence interval (CI) 12-34%], double that of clomiphene alone (11%) (95% CI 8-14%) (P < 0.01), and equal to HMG alone (18%) (95% CI 7-29%) or HMG and clomiphene together (19%) (95% CI 10-28%). The multiple birth rate for clomiphene-HMG (7/21) equalled that for HMG alone (3/12) and HMG and clomiphene together (3/8). The average number of ampoules of HMG required [follicle stimulating hormone (FSH) 75 mIU, luteinizing hormone (LH) 75 mIU] was decreased by 65% from 24.5 +/- 1.0 for HMG or HMG and clomiphene together to 8.6 +/- 0.3 for clomiphene-HMG (P < 0.001). Per cycle fecundity was identical when one, two or three ampoules of HMG per day were administered after clomiphene. We conclude that ovulation induction with sequential clomiphene-HMG results in fecundity double that of clomiphene alone and equal to HMG alone or concurrent with clomiphene, thereby reducing the requirement for HMG.     

Annealing behavior of Ar ion irradiated Bi2Sr2Can-1CunO4+2n superlattice and intergrowth films

Artificially layered Bi₂Sr₂Ca_n–1Cu_nO_4+n films were synthesized by sequential sputter deposition of BiO, SrCu_0.5O_1.5 and CaCuO₂ layers. Annealing behavior of these films which were irradiated by Ar ions was studied. Defect assisted improvement of their crystalline perfection is expected which might results in the improvement of the superconducting properties of these films. An artificial film, such as an intergrowth of 2223 and 2234 phases, and superstructure films of (2245)₁(2201)₁ and (2234)₁(2212)₁, were irradiated by Ar ions (150 keV, 2–10×10¹² ions/cm₂) and annealed at 730 °C. An improvement of superconducting transition temperatures were observed.     

Pressure control for complete denture impressions

Pressures produced during a final impression have been discussed from the standpoint of where they should be applied and where they should be reduced. Areas of the edentulous mouth requiring little pressure are: the palate, residual ridges, and areas of easily displaced gingiva. More pressure is needed in the border seal, on the buccal shelf, and against the retromylohyoid fossa. A clear processed acrylic resin tray with escape holes has been shown to meet the requirements for selective pressure application. Zinc oxide paste is the final impression material of choice in most instances.     

Development of the Base Station Controller and Manager in the CDMA Mobile System

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers’ motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and is responsible for controlling mobile calls from and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.     

Substrate transport and cocaine binding of human dopamine transporter is reduced by substitution of carboxyl tail with that of bovine dopamine transporter

A chimeric dopamine transporter (DAT) cDNA encoding mutant human DAT (hDAT) protein in which the intracellular carboxyl-terminal tail is replaced by that of the bovine dopamine transporter (bDAT) was constructed. The chimeric hDAT cDNA was expressed in COS-7 cells, and [3H]dopamine and [3H]MPP+ uptake and [3H]CFT binding capacities were assessed. Substrate transport and ligand binding of bDAT were reduced by 32-43% as a result of substitution of the carboxyl tail in hDAT, suggesting that the functional characteristics of bDAT arise from differences in the carboxyl tail between human and bovine DAT. Thus, it appears that the sequences encoded within the carboxyl terminal of DAT would be one of the important determinants for its functions.