载锰氮化碳催化臭氧法降解水中草酸研究

草酸是废水中多种有机物氧化降解的中间产物,与臭氧反应速率很低,难以直接氧化去除。本研究通过热解法煅烧不同摩尔比例的三聚氰胺与醋酸锰(Ⅲ)二水合物,制备出不同负载量的载锰氮化碳催化剂,并研究了不同条件下载锰氮化碳催化臭氧法对草酸的降解效果,考察三聚氰胺与醋酸锰摩尔比、催化剂投加量、p H值、臭氧浓度等因素以及叔丁醇对草酸去除效果的影响。实验结果表明:相对于单独臭氧氧化而言,载锰氮化碳催化臭氧法可以极大的提高草酸的去除率,在投加0.15 g/L三聚氰胺与醋酸锰20∶1的催化剂后,草酸在60 min的TOC去除率可达到89.1%。叔丁醇加入对草酸的去除率影响较小,表明·OH在载锰氮化碳催化氧化草酸的过程中起作用但不是唯一因素。     

Tensile properties of hollow glass bead‐filled polypropylene composites

The tensile properties of polypropylene (PP) filled with hollow glass beads have been measured at room temperature to identify the effects of the particle contents, size and its distribution on them in the present article. The mean diameters of the fillers were 11, 35, and 70 μm, and they were named as TK10, TK35, and TK70 respectively. The surface of these particles was pretreated with silane coupling agent. The results showed that the yield stress (σ_y) decreased gently for PP/TK70 systems, whereas decreased relatively obviously for PP/TK35 systems with increasing the volume fraction (?_f) of the fillers. When ?_f was less than 5%, the tensile strength at break (σ_b) of the composites increased with the increase of ?_f. When ?_f was more than 5%, σ_b was almost a constant for PP/TK70 systems, while σ_b decreased linearly for PP/TK35 systems. The tensile fracture strain (ε_b) of the composites decreased suddenly when ?_f was less than 5%, and then decreased slightly with increasing ?_f. When ?_f was 10%, σ_y and σ_b increased while ε_b decreased with the increase of the bead diameter. Furthermore, the σ_y was predicted by means an equation proposed in the previous work, and good interfacial adhesion was shown between the hollow glass beads and the matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1697–1701, 2007     

Structure Aware Visual Cryptography

Visual cryptography is an encryption technique that hides a secret image by distributing it between some shared images made up of seemingly random black‐and‐white pixels. Extended visual cryptography (EVC) goes further in that the shared images instead represent meaningful binary pictures. The original approach to EVC suffered from low contrast, so later papers considered how to improve the visual quality of the results by enhancing contrast of the shared images. This work further improves the appearance of the shared images by preserving edge structures within them using a framework of dithering followed by a detail recovery operation. We are also careful to suppress noise in smooth areas.     

聚氨酯预聚体——可聚合乳化剂用于MMA乳液聚合动力学及聚合稳定性研究

将合成的聚氨酯预聚体可聚合乳化剂（APUA）用于甲基丙烯酸甲酯（MMA）乳液聚合体系中，研究了不同引发剂体系和乳化剂对聚合体系的聚合稳定性和动力学影响，并与SDS乳化剂进行了对照。结果显示，用油溶性引发剂（AIBN）和水溶性引发剂（K2S2O8）都能引发该体系的聚合反应，而且聚合速率和转化率都相当高。用AIBN作引发剂时，APUA和SDS两种乳化所对应的动力学曲线不同，但APUA比SDS的聚合速率大得多，其分别类似于微乳液聚合（miniemulsion)和微悬浮聚合（microsuspention)，且聚合过程中会产生一定的凝胶。当乳化剂APUA用量适合时，凝胶量极少，聚合体系是稳定的；而当用K2S2O8作引发剂时，两乳化剂对应动力学曲线相似，聚合过程不产生凝胶。但当引发剂用量较大并以APUA作乳化剂时，在聚合过程中会出现全部粒子突然粗化现象，而以SDS作乳化剂没有出现这一现象。     

Conductive hybrid film from polyaniline and polyurethane-silica

In order to improve the mechanical performance and water resistance of water-borne conducting polyaniline film, conducting polyaniline/polyurethane-silica hybrid film was prepared in aqueous solution employing silanol-terminated polyurethane and methyltriethoxysilane as sol-gel precursors. The hybrid film showed surface resistivity of 10⁸ Ω even though the conducting polyaniline loading was only 10 wt% (or 1.5 wt% of polyaniline), and the mechanical performance as well as water resistance was significantly improved, making it suitable for antistatic application. Therefore, a practical route to water-borne processing of conducting polyaniline is disclosed.     

Virtual target tracking of mobile robot and its application to formation control

A virtual target tracking approach is proposed for kinematic control of mobile robot. In the controller, linear and angular velocity inputs are generated by using the local data of robot position and orientation along with the estimated velocity of target object. Applying the proposed approach to a cooperative robot group with arbitrary number of multiple mobile robots, it is possible to create various robot formations for cooperative navigation and tracking of moving object. The developed controller is shown to be stable and convergent through theoretical proof and a series of experiments.     

少烟HTPB/AP/RDX/Al推进剂比冲效率分析

对少烟HTPB／AP／RDX／A1推进剂能量性能进行了理论计算，通过BSFφ165和φ315试验发动机试验，考察了试验发动机类型，工作压力对经冲效率的影响，而且与高铅含量HTPB／AP／RDX／A1推进剂的比冲效率进行了比较，结果表明，铅含量对推进剂的比冲效率有显著的影响，低铝配方的比冲效率比高铝配方的比冲效率相对要高些；对于推进剂组分确定的配方，合适选择发动机的工作压力，可以不同程度地提高比冲效率，对于同一类型推进剂配方，通过计算理论比冲，结合比冲效率水平，可以对实际比冲进行有效的预估。     

Water uptake of epoxy coatings modified with γ-APS silane monomer

Epoxy resin was modified by a silane monomer, γ-aminopropyltrimethoxy silane (γ-APS), and was used as the protective coatings for LY12 aluminum alloys. The aim of the modification is to reduce the water uptake of polymeric coatings. The water absorption of coatings was measured by coating capacitance method in 3.5 wt.% NaCl aqueous solution. The result indicates that water uptake of epoxy coatings modified with 1.0 wt.% γ-APS decreases compared with pure epoxy coatings, whereas larger amounts of sliane result in the deterioration in performance against water permeation, due to the excessive consumption of epoxide group in epoxy resin by amino-group in silane agent, thus reduce the cross-linking of epxoy coating as a result of presence of excessive curing agent (polyamide). T_g of silane-modified coatings increases slightly after immersion, extremely contrasting with that of pure epoxy coating, which was observed to decrease significantly after water permeation. The formation of Si–O–Si structure resulting from the hydrolysis and condensation of silane components during the immersion in aqueous media may be a reasonable explanation for the abnormal change in T_g of silane-modified coatings. In addition, all silane-modified coatings display better protection performance, which is characterized by higher charge transfer resistances (R_ct) and lower double layer capacitance (C_dl) at substrate/electrolyte interface.     

带式输送机系统的设计与设备选型(一)

1通用带式输送机技术的发展情况 带式输送机与其他运输方式相比具有运距长，能力大，投资省，运费低，操作简单安全，管理维修容易，能耗低，污染小等优势而逐渐成为各行业物料搬运的主要手段。高强度的钢绳芯带式输送机因其为矿山开采和矿石输送工艺创造了十分有利的条件而在各种矿山外部输送中得到快速发展。近年来随着水泥厂规模迅速扩大，带式输送在水泥行业已成为矿石原料输送的首选方案。