包裹法国红色料在陶瓷领域应用的探索

探索包裹法国红色料在建筑陶瓷工业釉料、坯体中应用的工艺技术条件，采用正交实验方法找出包裹法国红色料在陶瓷釉料、外墙砖、地砖中的最佳发色条件：在釉料中一价的钾、钠离子特别利于该色料的发色；二价离子钡较好、钙次之、镁最差；法国红色料在普通熔块中发色不理想，在特制的熔块中发色良好。     

液相合成纳米氧化锌及其光催化性能探讨

以硝酸锌和氢氧化钠为原料,分别以水和醇作为溶剂,采用液相直接沉淀法合成纳米氧化锌。在以水为反应溶剂条件下,研究了反应时间、反应温度、反应物浓度和反应物配比对纳米氧化锌中位径和形貌的影响,得到制备较小中位径及合适长径比纳米氧化锌的最优反应条件,即:反应时间为3 h、反应温度为70 ℃、锌离子浓度为0.5 mol/L、锌离子与氢氧根浓度比为1:2。在上述最优反应条件下,研究了不同醇溶剂对纳米氧化锌中位径、形貌及其光催化性能的影响。研究发现,随着溶剂碳链长度的增长,纳米氧化锌中位径呈现上下波动,无明显变化规律,形貌由球状向柱状发展,光催化性能总体不断减弱。     

Stress-strain partitioning analysis of constituent phases in dual phase steel based on the modified law of mixture

A more accurate estimation of stress-strain relationships for martensite and ferrite was developed, and the modified law of mixture was used to investigate the stress-strain partitioning of constituent phases in dual phase (DP) steels with two different martensite volume fractions. The results show that there exist great differences in the stress-strain contribution of martensite and ferrite to DP steel. The stress-strain partitioning coefficient is not constant in the whole strain range, but decreases with...     

Electrochemical behavior of K3Fe（CN）6 in water-in-oil microemulsion

A water-in-oil (W/O) microemulsion composed of Triton X-100, n-hexanol, n-hexane and water solution with hydrochloric acid was prepared. K₃Fe(CN)₆ was added in as a water-soluble electroactive probe, and its electrochemical behavior was investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). It is found that the H⁺ concentration of the water phase has a great effect on the conductivity of the W/O microemulsion, and hence influences the electrochemical behavior of K₃Fe(CN)₆. When the pH value of water phase is about 7, the electrical conductivity of the W/O microemulsion is only 1.2×10⁻⁶ S/cm, and K₃Fe(CN)₆ almost cannot react at the glassy carbon electrode. But when the H⁺ concentration is more than 3 mol/L, the W/O microemulsion has a good electrical conductivity and K₃Fe(CN)₆ shows good electrochemical performance in it. The results of CV and EIS studies indicate that the electrochemical behavior of Fe(CN)₆ ³⁻/Fe(CN)₆ ⁴⁻ in the W/O microemulsion is different from that in the aqueous solution. This may be due to the unique liquid structure of the W/O microemulsion and the unique mass transfer in the W/O microemulsion. Foundation item: Projects(20673036, J0830415) supported by the National Natural Science Foundation of China; Projects(05JT1026, 2007JT2013) supported by the Science Technology Project of Hunan Province, China     

Controllable fabrication of SnO2-coated multiwalled carbon nanotubes by chemical vapor deposition

A simple and efficient approach for coating multiwalled carbon nanotubes (MWCNTs) with size-controllable SnO₂ nanoparticles by chemical vapor deposition has been developed using tin hydride (SnH₄) gas as the source of SnO₂ at 550 °C. The size and coverage of SnO₂ nanoparticles can be adjusted by simply controlling the deposition time and the flow rate of the SnH₄/N₂ mixture gas during the CVD procedure. In addition, by using the MWCNTs as a sacrificial template, a kind of one-dimensional chain-like SnO₂ nanostructure has been synthesized by increasing the deposition temperature to 730 °C. This technique may provide a good way to produce tunable SnO₂-MWCNT composites.     

实时洪水预报中基于岭估计的AR修正模型研究

为提高实时洪水预报精度,经常将水文模型与误差修正模型相结合,AR模型因其结构简单广泛应用于实时洪水预报误差修正。然而,实际应用显示,AR模型时常出现修正结果不稳定现象,表现为流量修正幅度过大,甚至出现“震荡”现象,严重影响修正效果。鉴于此,本文从矩阵特征值角度解释了AR模型出现不稳定现象的原因,并引入岭估计方法选择性利用流量信息更新自回归系数,使其更满足真实流量的涨落过程,增强该模型的稳健性。将新方法应用于蔺河口流域,结果显示岭估计方法显著提高了AR模型的稳健性,从而改善了模型修正效果,进一步提高了洪水预报精度。     

FAGNet:基于MAFPN和GVR的遥感图像多尺度目标检测算法

针对大场景遥感图像内容复杂,并且具有目标种类较多、尺度不一、方向多变等特点,导致遥感图像中目标多类多尺度多方向的问题,提出一种基于多尺度注意力特征金字塔网络(MAFPN)以及滑动顶点回归(GVR)机制的遥感图像目标检测方法.首先利用骨干网络提取多层特征作为MAFPN的输入,MAFPN结合特征融合和注意力机制,在融合多个尺度的特征映射的基础上使用通道域注意力和空间域注意力机制来抑制噪声,增强有效特征复用,提高网络对目标多尺度特征的自适应性;将MAFPN输出的融合特征图输入区域建议网络(RPN)生成感兴趣区域,然后将其送入分类/回归网络;在分类/回归网络中使用GVR机制在预测水平框的基础上增加4个顶点偏移比例参数和旋转因子,将水平框转换为旋转框,以减少边框中冗余区域,使预测得到的旋转边框更贴合目标.在DOTA公开数据集上与多种基于卷积神经网络的经典检测算法进行对比的实验结果表明,该方法的平均检测精度得到显著提高,能够更加准确地检测多个尺度以及多个方向的目标,实现了多尺度目标的鲁棒性检测.     

Effect of modified layered double hydroxide on the flammability of intumescent flame retardant PP nanocomposites

The dodecyl sulfate intercalated CaMgAl-hydrotalcites (layered double hydroxides [LDHs]) were successfully prepared by co-precipitation method, and characterized by X-ray diffraction analysis, infrared spectroscopy (Fourier transform infrared spectra [FT-IR]), thermogravimetry (TG-DTA), scanning electron microscope, and Brunner−Emmet−Teller (BET). The prepared LDHs were added to the intumescent flame retardant (IFR) polypropylene (PP) nanocomposites, and the limiting oxygen index method (LOI), vertical combustion method (UL-94), cone calorimetry (CCT), and other test methods were used to study its thermal stability and combustion performance. The results showed that when the flame retardant was composed of 23 wt% IFR and 2 wt% O-SDS-LDHs, the LOI value of the material was increased to 31.5%, reaching the V-0 level, and the flame retardant performance was significantly improved. The results also showed that there was a significant synergistic effect between IFR and O-SDS-LDHs, which could improve the thermal stability and graphitization degree of PP nanocomposites. In addition, the peak heat release rate, total heat release, and total smoke production of the PP/IFR/O-SDS-LDHs system were 177 kW/m², 101 MJ/m², and 15.4 m², respectively, which were 82.2%, 51.0%, and 23.0% lower than those of pure PP, respectively. These improvements could be attributed to the presence of dense and continuous char layer formed by the synergistic effect.     

铸造铝合金轮毂T6热处理工艺的优化研究

研究了固溶时间、淬火停留时间及涂装烘烤工艺对A356合金铸造轮毂性能的影响规律并优化了T6热处理工艺，将淬火停留时间缩短到2h。研究表明：未涂装时优化工艺使合金抗拉强度达到240MPa，屈服强度达到181MPa。伸长率达到8％；涂装后抗拉强度达到262MPa，屈服强度达到179MPa，伸长率达到9％，接近并达到目前国内T6工艺的强度性能，超过了国内轮毂行业的强度性能标准，具有一定的生产实际意义。     

水陆装甲车车体锈层分析

采用x射线衍射、SEM和EPMA等方法对服役20年～30年 水陆装甲车车体锈层进行了研究，研究表明：锈层中含有Cl-，锈层主要由α-FeOOH、β-FeOOH、γ-FeOOH、γ-Fe2O3、Fe3O4以及α-Fe等相组成，同时还残留有极少量的绿锈GR*(I).结合水陆装甲车的使用环境(海水、淡水，干湿交替)，对锈层各相的成因进行了分析.内锈层致密，大蚀坑下有小蚀坑，锈层中包含有呈小岛状弥散分布的Fe基体，均匀腐蚀与局部点蚀共同造成了材料的腐蚀破坏.