Synthesis and characterization of zeolite NaY from rice husk silica

Rice husk silica (RHS) in amorphous phase with 98% purity was prepared from a waste rice husk from rice milling by leaching with hydrochloric acid and calcination. The RHS was used effectively as a silica source for the synthesis of zeolite Y in sodium form (NaY). The zeolite in pure phase was obtained from a two-step synthetic route in which the starting gels were mixed, aged for 24 h at room temperature and crystallized for 24 h at 90 °C. The diameter of single crystal particles from a scanning electron microscope was approximately 1.0 μm, whereas the average particle diameter from laser diffraction particle size analyzer was approximately 10 μm because of the agglomeration of small crystals. Longer crystallization time in this route resulted in a mixed phase containing NaY and zeolite P in sodium form (NaP). In addition, a one-step synthetic route (no aging) was studied and the product was also a mixed phase zeolite.     

Highly ordered anodic alumina nanotemplate with about 14 nm diameter

A novel method for the fabrication of highly ordered nanopore arrays with very small diameter of 14 nm was demonstrated by using low-temperature anodization. Two-step anodization was carried out at 25 V, sulfuric acid concentration of 0.3 M, and electrolyte temperature of −15 °C. After anodization, a regular pore array with mean diameter of 14 nm and interpore distance of 65 nm was formed. The pore diameter and regular arrangement were confirmed by scanning electron microscopy (SEM) and fast Fourier transformation (FFT), respectively. The present results strongly suggest that the diameter of pores in a highly ordered alumina template can be reduced by lowering the anodization temperature.     

Multi-site phase transfer catalyst assisted radical polymerisation of glycidyl methacrylate using potassium peroxydisulphate as initiator – a kinetic study

In this work, the kinetics and mechanism of free-radical polymerisation of glycidyl methacrylate (GMA) using potassium peroxydisulphate (PDS) as water soluble initiator in the presence of synthesized 1, 4-Bis (tributyl methyl ammonium) benzene dichloride (TBMABDC) as multi-site phase transfer catalyst (MPTC) was studied. The polymerisation reactions were carried out under inert and unstirred conditions at constant temperature of 60 ± 1°C in cyclohexane/water biphase media. The role of concentrations of monomer, initiator, catalyst and volume fraction of aqueous phase, solvent polarity and temperature on the rate of polymerisation (Rp) was ascertained. The order with respect to monomer and initiator was found to be unity. The order with respect to catalyst was found to be 0.51. The rate of polymerisation is independent of ionic strength and pH of the medium. However, an increase in the polarity of solvent has slightly increased the Rp value. Based on the results obtained, a suitable kinetic scheme has been proposed to account for the experimental observations and its significance discussed.     

Finite sample properties of estimators of spatial autoregressive models with autoregressive disturbances

The article investigates the finite sample properties of estimators for spatial autoregressive models where the disturbance terms may follow a spatial autoregressive process. In particular we investigate the finite sample behavior of the feasible generalized spatial two-stage least squares (FGS2SLS) estimator introduced by Kelejian and Prucha (1998), the maximum likelihood (ML) estimator, as well as that of several other estimators. We find that the FGS2SLS estimator is virtually as efficient as the ML estimator. This is important because the ML estimator is computationally burdensome, and may even be forbidding in large samples, while the FGS2SLS estimator remains computationally feasible in large samples. Received: 20 January 2001 / Accepted: 31 August 2001     

Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22

Alloy 22 (N06022) is the current candidate alloy used to fabricate the external wall of the high-level nuclear waste containers for the Yucca Mountain repository. It was of interest to study and compare the general and localized corrosion susceptibility of Alloy 22 in fluoride and chloride solutions at 90 °C. Standard electrochemical tests such as cyclic potentiodynamic polarization, amperometry, and electrochemical impedance spectroscopy were used. Studied variables included the solution pH and the alloy microstructure (thermal aging). Results show that Alloy 22 is highly resistant to general corrosion in all the solutions tested. Thermal aging is not detrimental and even seems to be slightly beneficial for general corrosion at the higher solution pHs. Pitting corrosion was never observed. Crevice corrosion was found only for high chloride-containing solutions after anodic polarization. The presence of fluoride ions together with chloride ions seems to increase the susceptibility of Alloy 22 to crevice corrosion compared to pure chloride solutions. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

Research on Marine Boiler＇s Pressurized Combustion and Heat Transfer

The effect of pressure on combustion and heat transfer is analyzed. The research is based on the basic combustion and heat transfer theorem. A correction for the heat calculation method for pressurized furnace is made on the basis of the normal pressure case. The correction takes the effect of pressurizing into account. The results show that the correction is reasonable and the method is applicable to combustion and heat transfer of the marine supercharged boiler.     

控制性水库建设模式研究

水库梯级（尤其是控制性水库梯级）的建设在西南水电开发中具有举足轻重的地位。但控制性水库梯级一般位于河流上游，为获得需要的调节库容，要求有较高的坝，从而增加筑坝的难度，水库淹没较大，相应的投资亦较大，故经济性相对于其它类型的电站较差。为促进控制性水库梯级的建设，有必要对控制性水库的建设模式进行研究，寻求其可能的投资分摊方式。本文在合理核算上游控制性水库梯级对其下游梯级受益电站补偿调节效益的基础上，对上游控制性水库梯级建设模式进行了研究，提出了控制性水库梯级几种可能的建设投资分摊模式。     

Softwarekartographie

Zusammenfassung  Anwendungslandschaften in Unternehmen sind langlebige hoch-komplexe Strukturen bestehend aus hunderten bis tausenden von miteinander vernetzten betrieblichen Informationssystemen, die von Personen mit sehr unterschiedlichen Interessen und Erfahrungshintergrund konzipiert, erstellt, modifiziert, betrieben, genutzt und finanziert werden. Die Softwarekartographie zielt darauf ab, die Kommunikation zwischen diesen Personen durch zielgruppenspezifische verst?ndliche graphische Visualisierungen zu unterstützen, die Gesch?fts- und Informatik-Aspekte gleicherma?en berücksichtigen, und die speziell für langfristige und strategische Management-Betrachtungen geeignet sind. In diesem Beitrag fassen wir zun?chst die in der betrieblichen Praxis wohlbekannten Probleme beim Management von Anwendungslandschaften zusammen und diagnostizieren erhebliche Kommunikationsdefizite. Da Anwendungslandschaften als Systeme von Systemen mit Menschen als integrale Systembestandteile zu verstehen sind, werden Karten als attraktiver L?sungsansatz identifiziert und die wesentlichen Konzepte der Softwarekartographie anhand von Beispielen vorgestellt. Dabei werden Querbezüge zu anderen Fachgebieten der Informatik und Wirtschaftsinformatik hergestellt, und die bisherige Nutzung der Forschungsergebnisse in der Praxis gezeigt.     

Recrystallization of phenylbutazone using supercritical fluid antisolvent process

Phenylbutazone was recrystallized from its solutions by using a supercritical fluid antisolvent process. It was dissolved in acetone and supercritical carbon dioxide was injected into the solution, thereby inducing supersaturation and particle formation. Variation in the physical properties of the recrystallized phenylbutazone was investigated as a function of the crystallizing temperature and the carbon dioxide injection rate. The recrystallized particles showed cleaner surfaces and more ordered morphology compared to the particles obtained by other methods such as solvent evaporation. X-ray diffraction patterns indicated that the crystallinity of the particles had been modified upon the recrystallization. Differential scanning calorimetry measurement revealed that the crystallizing temperature influenced the thermal stability of the resulting crystals. Larger crystals were produced when the carbon dioxide injection rate was reduced.