Optimization of superconducting critical temperatures by control of cation and anion stoichiometry in Bi2Sr2CaCu2Oδ-based solid solutions

T _c data are reported for powders of cation-stoichiometric Bi₂Sr₂CaCu₂O and for nonstoichiometric samples based on the three mechanisms BiSr, SrCa and Sr vacancy. For each, the T _c values depend critically on the final oxygen contents, which were varied by heating samples in either O₂ or N₂ at different temperatures. Stoichiometric Bi₂Sr₂CaCu₂O has the highest T _c, 92 K, obtained after heating in O₂ at 820 °C. Heating in O₂ at lower temperatures gives rise to overdoping and T _c decreases to 60 K. The other cation compositions show a smaller maximum T _c but also less reduction in T _c on overdoping. Under-doped samples, with reduced T _c values were obtained on heating in N₂. These data, together with selected literature results, lead to a unified picture of the variation of T _c with cation composition and oxygen content.     

Functionally graded nickel-aluminide and iron-aluminide coatings produced via laser cladding

Functionally graded nickel-aluminide and iron-aluminide in the form of superimposed clad layers up to 4 mm total thickness were produced on nickel and on iron based substrates, respectively. A continuous wave carbon dioxide laser and two separate powder feeders were employed. The processing parameters were: 1.8 kW laser power, 3 mm beam diameter, and 7 mm s^–1 traverse speed. A series of single clad layers with various Al contents were first produced in order to obtain fundamental data required for the processing of functionally graded materials. Functionally graded Ni-Al and Fe-Al coatings (up to three layers) were produced by successive deposition of clad layers normal to the substrate surface.Compositional control was achieved by keeping the powder flow of Ni or Fe constant and changing the flow rate of Al. Microstructures are interpreted and discussed in relation to aluminides based on the Ni-Al and Fe-Al systems.     

Long latency postural reflexes are under supraspinal dopaminergic control

Scaling of posturally stabilizing long latency (LL) reflexes in tibialis anterior muscles induced by "toe-up" rotational perturbations is abnormal in standing patients with Parkinson's disease. To investigate the contribution of dopaminergic pathways to abnormal scaling, we studied LL reflexes in 22 patients with selective hypodopaminergic syndromes: 10 psychiatric patients taking chronic neuroleptic medication (7 with mild parkinsonism), 8 patients with young-onset Parkinson's disease, and 4 patients with MPTP-induced parkinsonism. Results were compared with those of 10 healthy controls. Stimuli consisted of (a) 10 serial (predictable) perturbations of 4 degrees amplitude, (b) 10 serial (predictable) perturbations of 10 degrees amplitude, and (c) 20 randomly mixed (unpredictable) perturbations of either 4 or 10 degrees amplitude. In normal subjects, LL reflex amplitudes were adapted to match predictable variations in stimulus size, whereas under unpredictable conditions a "default" response emerged that anticipated the 10 degrees perturbation. LL reflex scaling under predictable conditions was intact in patients with neuroleptic-induced parkinsonism and young-onset Parkinson's disease, but the large default LL response under unpredictable conditions was absent. In patients with MPTP-induced parkinsonism, LL reflex scaling was absent during both predictable and unpredictable conditions. We conclude that abnormal scaling of posturally stabilizing LL reflexes is related to decreased supraspinal dopaminergic influence.     

Evidence that the modulation of membrane-associated protein kinase C activity by an endogenous inhibitor plays a role in N1E-115 murine neuroblastoma cell differentiation

Murine neuroblastoma cells, N1E-115, were induced to differentiate into neuron-like cells by serum deprivation for 18 h. As previous studies have shown that the suppression of protein kinase C (PKC) activity by selective inhibitors or neutralizing antibodies induces neuroblastoma cells to differentiate, we tested the hypothesis that serum deprivation may cause a rapid loss in membrane PKC activity that occurs well before the morphological changes that are characteristic of cell differentiation. A significant reduction in particulate (membrane) PKC activity was indeed observed within 3 h of serum withdrawal when enzyme activity was measured in intact native membranes by the recently described in vitro "direct" assay. This rapid reduction in enzyme activity was confirmed by the decreased phosphorylation of the MARCKS protein, an endogenous PKC-selective substrate, in intact cells. The decrease in membrane PKC activity occurred without any loss in the amount of membrane-associated enzyme, suggesting that some factor(s) resident in neuroblastoma membranes was suppressing PKC activity. Indeed, results indicate the presence of an endogenous inhibitor of PKC tightly associated with neuroblastoma membranes. This inhibitory activity increased in the membranes of cells subjected to serum deprivation, raising the possibility that it was likely responsible for the decline in membrane PKC activity in differentiating N1E-115 cells. Preliminary characterization indicated that the inhibitory activity is a protein and is localized mainly in the membrane fraction. Thus, these results demonstrate directly that endogenous inhibitor can regulate membrane-associated PKC activity in cells and thereby modulate PKC-related neuronal functions.     

Isoseparation curves: a mechanism for optimizing off-axis dose homogeneity of intact breast irradiation

The purpose of this paper is to determine whether using off-axis isoseparation curves to optimize the collimator rotation angle improves dose homogeneity. Eleven intact breast irradiation patients underwent computerized tomography (CT) treatment planning with 1 cm abutting slices. Central plane treatment planning, using 6 MV photons, tissue inhomogeneity corrections, and isocentric opposed tangent treatment fields, was performed. Collimators were rotated to match chest wall slope through the use of a beam's-eye-view setting. Patient separations were measured from the apex of the breast to the posterior field border on each axial CT slice. Sagittal-plane isoseparation curves were constructed from these measurements. Using these curves, the collimator rotation that minimized off-axis separation differences was determined. A comparison of off-axis dose inhomogeneity was performed for patients with a > or =10 degrees difference between this optimized collimator angle and the angle determined by chest wall slope. These comparative treatment plans differed only with respect to collimator angle rotation. The mean optimal collimator rotation angle differed significantly from the mean rotation angle which matched the chest wall slope (5.4 degrees vs. 11 degrees, respectively, P < 0.001). Four of the 11 patients had rotation angle differences of 10 degrees. In these patients, the optimization of collimator angle reduced the percentage of breast volume to "that" received > or =110% of the prescribed dose. For the patient with the largest breast size to the patient with the smallest breast size the decreases were, respectively, 5% (15% to 10%), 3% (24% to 21%), 1% (4% to 3%), and 1% (0.9% to 0%). The mean reduction in dose inhomogeneity was greatest in the inferior breast quadrants. At 6 cm and 4 cm off axis, the mean reductions in the percentages of the breast tissue to "that" received 110% of the prescribed dose were respectively 15.1% and 5.3 %. Optimizing the collimator angle through the use of isoseparation curves decreases dose inhomogeneity. The greatest improvements are in the inferior quadrants of the intact breast. The improved dose homogeneity may have clinical relevance in the treatment of patients with large breast sizes.     

National quality of care activities in Germany

The burn nursing Delphi study identified pain management as the most important area of burn nursing research. The question, "What is the best method to measure the pain of the patient with burns?" ranked in the top 10% of the nursing research priorities and is the research question of this study. The most commonly used pain assessment tools were determined in a 1994 survey of burn centers. Of those that responded, 67% used the Visual Analog Scale and 43% used an adjective scale. Forty patients were enrolled in this prospective, multicenter study. Visual analog and color scales were used during a 3-day cycle and word and faces scales were used during another 3-day cycle. Pain levels were assessed twice each day, once during a quiet time and then again immediately after a painful activity. At the end of each 3-day cycle the patient was asked which tool he or she preferred. At the completion of the study period the patient was asked to select the overall most preferred tool for pain assessment. Although this study indicates that patients prefer the faces and color scales to the most commonly used visual analog and adjective scales, further research is needed to determine the potential impact of preferred tools on pain intervention. The results may also lead burn centers to re-evaluate current selection of pain assessment tools.     

Nutrition support for patients after cardiopulmonary bypass: required modifications of the TPN solution

Background electrolyte (BGE) systems with two coions are frequently used in capillary zone electrophoresis (CZE), especially in cases where indirect optical detection is employed. This study investigates the behavior of analytes, which possess mobilities intermediate to those of the BGE coions used. Besides the expected behavior, where the analytes provide either tailing or fronting zones, unusual behavior with extraordinary zone broadening is also observed in some cases. The explanation for this effect is that binary BGE systems involve, as a physico-chemical rule, a region where the analytes are forced by one coion to give tailing zones and simultaneously by the other coion to give fronting zones. The result of this "schizophrenic" situation is extraordinary zone broadening and deterioration of the detection record. A series of experiments is presented showing in a telling way the electromigration behavior of the discussed type of zones as well as the ways to remedy the deterioration of the peak shape by a mere slight changing of the quantitative composition of the BGE used.     

Avoidance of stomas and delayed anastomosis for bowel necrosis: the ''clip and drop-back'' technique

Necrotizing enterocolitis (NEC) and midgut volvulus (MGV) often are associated with extensive bowel necrosis. These cases may require extensive enterectomy and the formation of high or multiple stomas, and frequently are complicated by short bowel syndrome, excessive fluid losses, fistulas, stenosis, and skin breakdown. This report describes a "clip and drop-back" technique, followed by delayed anastomosis performed 48 to 72 hours later. The technique was successful in five severely ill infants (3 NEC, 2 MGV) with extensive necrosis, bowel perforation(s), and peritonitis, who required either a high stoma near the ligament of Treitz or multiple resections and enterostomies. This method removes obvious necrotic perforated bowel, controls contamination, avoids stomas (and their inherent complications in this age group), and preserves bowel length. All five babies survived. The technique is a useful addition to the pediatric surgeon's operative armamentarium in selective cases.     

Nonmitogenic anti-CD3F(ab')2 fragments inhibit lethal murine graft-versus-host disease induced across the major histocompatibility barrier

We have investigated the in vivo administration of nonmitogenic anti-CD3F(ab')2 fragments for the prevention of lethal graft-vs-host disease (GVHD) in irradiated recipients of fully allogeneic bone marrow cells plus splenocyte (BMS) inocula. Recipients of anti-CD3F(ab')2 fragments administered for 1 mo post-bone marrow transplantation (BMT) had 100% survival without clinical or histopathological evidence of GVHD. Controls given saline injections succumbed by 39 days post-BMT. Similar results were obtained in groups of recipient mice given BMS in which T cells were depleted by in vitro anti-Thy-1.2 plus C' treatment. Further studies were undertaken to define mechanistic differences in the two approaches. Using Ly-5 congenic sources of donor bone marrow and spleen, we determined that anti-CD3F(ab')2 fragments induced TCR modulation and T cell depletion. Mature splenic-derived CD4+ cells were depleted to a greater extent than CD8+ cells. Early post-BMT, recipients receiving injections with control saline had the highest number of CD4+ and CD8+ cells (which may cause GVHD) followed by recipients of anti-CD3F(ab')2 fragments, with the fewest CD8+ cells observed in the anti-Thy-1.2 + C' treated group. CD3+CD4-CD8- cells (which may suppress GVHD generation) were present in higher numbers early post-BMT in recipients given anti-CD3F(ab')2 fragments as compared to recipients given anti-Thy-1.2 + C'-treated BMS. In long term survivors, a mononuclear T cell containing infiltrate without evidence of destruction was observed in sites of GVHD (lung and liver), consistent with a "Quilty" effect, which was not observed in either of the other two groups. Although survivors were tolerant of donor skin grafts and rejected third party grafts, recipients given anti-CD3F(ab')2 fragments but not anti-Thy-1.2 + C'-treated BMS had vigorous anti-host proliferative responses. These results demonstrate that although in vitro anti-Thy-1.2 + C' treatment of BMS (which is highly depletionary) and in vivo administration of anti-CD3F(ab')2 fragments (which is modulatory and less depletionary) are both effective strategies for GVHD, the cellular events involved in achieving GVHD prevention are indeed different.     

Continuous,martensitic nature of the transition ß→γ Li3PO4

The transformation Li₃PO₄ shows characteristics of both continuous and martensitic transformations. Below 340° C, no detectable transformation occurs; between 340 and 410° C, the transformation goes only partially to completion; above 410° C the transformation rapidly goes to completion. At any temperature in the range 340 to 410° C, transformation proceeds rapidly in the initial stages to attain a certain degree of transformation. With prolonged isothermal heating or grinding of the samples, further transformation does not occur. The reverse transformation could not be effected under normal, dry conditions.