Towards occupant-centric simulation-aided building design: a case study

ABSTRACT

This paper aims at illustrating the importance of occupant modelling for decision-making during the building design process. It identifies the energy implications of conventional ways of modelling occupants for the design of office buildings. Furthermore, it presents a step towards bridging the gap between the research efforts and conventional practices within the field of building performance simulation (BPS) aided design. The paper first describes occupant-related assumptions that were made during the design process of a case study office building, obtained via stakeholder interviews. Then, the impact of these assumptions on the design decisions is examined through a simulation-based investigation. The stakeholder interviews revealed that professionals from each design discipline made significantly different assumptions about occupants. The simulation results showed that assumptions about occupants and their behaviour impacted predicted energy savings of some design decisions by a factor of five or more.     

Perspecta 20, Perspecta 21

In preparation of the JAE Jubilee issue many invitations were made to respond to the paragraph printed below. Because of a highly condensed schedule in the production of this special issue, the cut-off date for receipt of articles had to be moved up and several individuals, whose invited responses were in the final stages of preparation or even in transit to JAE, could not be included in that issue. This is regrettable; however, during the upcoming year we will be printing those articles and again invite our readership to respond and discuss those issues put forward in the Jubilee statement.—Ed.     

Bio-electrochemical conversion of atmospheric N<Subscript>2</Subscript> to ammonium using free-living diazotrophs

The effects of electrochemical reducing power on enrichment, growth, and ammonium production of freeliving diazotrophs from rhizosphere soil were evaluated. Soil bacteria were cultivated in a conventional bioreactor (CBR) and an electrochemical bioreactor (EBR), both containing a neutral red-modified graphite felt (NR-GF) cathode and a platinum anode, but with electricity charged to the EBR only. Temperature gradient gel electrophoresis identified 21 species from rhizosphere soil, and 17 and seven species from the CBR and EBR, respectively, after 40 days of incubation. Six species from the CBR and five species from the EBR were diazotrophs. The bacterial community biomass and the ammonium content in the bacterial culture were, respectively, 1.6 and 2 times higher in the EBR than in the CBR. These results indicate that the electrochemical reducing power generated from the NR-GF may be a driving force in the activation of enrichment, growth, and N₂-fixing metabolism of diazotrophs.     

Lipase-Catalyzed Synthesis of Fatty Acid Pyridylcarbinol Ester for the Analysis of Seed Lipids

Numerous derivatives of fatty acids (FA), including esters of methanol/3‐hydroxymethylpyridine or dimethyloxazoline, are used for the analysis of FAs in biological specimens. Picolinyl derivatives are frequently prepared for structural determination by gas chromatography–mass spectrometry (GC‐MS) since they provide characteristic fragments. The ester can be prepared by chemical methods‐multistep methodologies or basic transesterification. Microbial lipases catalyze a number of transesterification reactions, and their catalytic activities are often stable at extreme conditions. Although these characteristic features may be useful in the application of typical FA structure analysis by picolinyl ester, detailed studies have not been reported. To address the problems, a simple and quantitative methodology for the synthesis of picolinyl esters from lipids has been developed. It involves the transesterification with Novozym 435 (Novozymes Biopharma US Inc., Franklinton, USA), resin‐immobilized lipase from Candida antartica in toluene. Mild reaction conditions allow for complete derivatization of perilla seed oil in 30 min at 50 °C. The procedure was further studied with various TAGs and fatty wax from 17 plants. The optimized procedure was as follows; 1 mg lipid and 20 mg catalyst in 2 mL toluene at 50 °C for 1 h. Quantitative analysis of marker FAs was performed with the proposed method. The results coincided well with those from potassium t‐butoxide‐catalyzed reaction. The optimized method, however, was not applicable for the determination of some epoxy FAs, fatty wax, and parinaric acid.     

Conversion of Canola Meal into a High-Protein Feed Additive via Solid-State Fungal Incubation Process

The study goal was to determine the optimal fungal culture to reduce glucosinolates (GLS), fiber, and residual sugars while increasing the protein content and nutritional value of canola meal. Solid‐state incubation conditions were used to enhance filamentous growth of the fungi. Flask trials were performed using 50 % moisture content hexane‐extracted (HE) or cold‐pressed (CP) canola meal with incubation for 168 h at 30 °C. Incubation on HE canola meal Trichoderma reesei (NRRL‐3653) achieved the greatest increase in protein content (23 %), while having the lowest residual levels of sugar (8 % w/w) and GLS (0.4 μM/g). Incubation on CP canola meal Trichoderma reesei (NRRL‐3653), A. pullulans (NRRL‐58522), and A. pullulans (NRRL‐Y‐2311‐1) resulted in the greatest improvement in protein content (22.9, 16.9 and 15.4 %, respectively), while reducing total GLS content from 60.6 to 1.0, 3.2 and 10.7 μM/g, respectively. HE and CP canola meal GLS levels were reduced to 65.5 and 50.7 % by thermal treatments while solid‐state microbial conversion further reduced GLS up to 99 and 98 %, respectively. Fiber levels increased due to the concentration effect of removing oligosaccharides and GLS.     

Daily Enteral DHA Supplementation Alleviates Deficiency in Premature Infants

Docosahexaenoic acid (DHA) is an essential fatty acid (FA) important for health and neurodevelopment. Premature infants are at risk of DHA deficiency and circulating levels directly correlate with health outcomes. Most supplementation strategies have focused on increasing DHA content in mother's milk or infant formula. However, extremely premature infants may not reach full feedings for weeks and commercially available parenteral lipid emulsions do not contain preformed DHA, so blood levels decline rapidly after birth. Our objective was to develop a DHA supplementation strategy to overcome these barriers. This double‐blind, randomized, controlled trial determined feasibility, tolerability and efficacy of daily enteral DHA supplementation (50 mg/day) in addition to standard nutrition for preterm infants (24–34 weeks gestational age) beginning in the first week of life. Blood FA levels were analyzed at baseline, full feedings and near discharge in DHA (n = 31) or placebo supplemented (n = 29) preterm infants. Term peers (n = 30) were analyzed for comparison. Preterm infants had lower baseline DHA levels (p < 0.0001). Those receiving DHA had a progressive increase in circulating DHA over time (from 3.33 to 4.09 wt% or 2.88 to 3.55 mol%, p < 0.0001) while placebo‐supplemented infants (receiving standard neonatal nutrition) had no increase over time (from 3.35 to 3.32 wt% or 2.91 to 2.87 mol%). Although levels increased with additional DHA supplementation, preterm infants still had lower blood DHA levels than term peers (4.97 wt% or 4.31 mol%) at discharge (p = 0.0002). No differences in adverse events were observed between the groups. Overall, daily enteral DHA supplementation is feasible and alleviates deficiency in premature infants.     

Trans10,cis15 18:2 Isolated from Beef Fat Does Not Have the Same Anti-Adipogenic Properties as Trans10,cis12–18:2 in 3T3-L1 Adipocytes

During ruminal biohydrogenation of α‐linolenic acid, a non‐conjugated non‐methylene interrupted dienoic acid is formed containing a t10 double bond, namely t10,c15–18:2. The present study was designed to examine whether t10,c15–18:2 would exert similar anti‐adipogenic effects compared to t10,c12–18:2 in 3T3‐L1 adipocytes. Differentiated 3T3‐L1 adipocytes were treated with 35 or 70 µM of LNA, t10,c12–18:2, t10,c15–18:2, or bovine serum albumin (BSA) vehicle control for 120 h. Cellular triacylglycerol and protein were quantified using commercial colorimetric kits. Cells were analyzed for fatty acid composition and gene expression using gas chromatography and quantitative PCR, respectively. Trans10,cis12–18:2 decreased (P < 0.05) the adipocyte triacylglycerol (TAG) content, which was mainly related to a reduction in saturated fatty acids (SFA; e.g., 16:0 and 15:0) and cis monounsaturated fatty acids (c‐MUFA; e.g., c9–16:1 and c9–18:1). Trans10,cis12 also decreased (P < 0.05) the expression of genes related to fatty acid synthesis (ACACA, FASN), delta‐9 desaturation (SCD1), fatty acid elongation (ELOVL5), and fatty acid uptake (LPL) and upregulated (P < 0.05) the expression of the rate‐liming enzyme involved in fatty acid β‐oxidation (CPT1). In contrast, LNA and t10,c15–18:2 did not affect the gene expression and cellular content of the TAG, SFA, c‐MUFA, or SCD1 indices in adipocytes. Our findings suggest that t10,c15–18:2, despite having structural similarity to t10,c12–18:2 (presence of a trans‐10 double bond), does not exert anti‐adipogenic effects in 3T3‐L1 adipocytes.     

Structure and mechanical properties of multi‐hollowed fibers produced by CO2 laser irradiated neck drawing

Multi‐hollowed fibers with a hollowness ratio of over 20% were successfully produced using a neck‐drawing technique accompanied by CO₂ laser irradiation on unoriented and amorphous polytrimethylene terephthalate (PTT) fibers with diameters of approximately 104 µm. The structure and mechanical properties of the multi‐hollowed fibers were characterized using scanning electron microscopy, wide angle X‐ray diffraction (WAXD), birefringence measurements, and tensile tests. Crystal orientation factors in the direction normal to the (010) and (002) planes, which were obtained from WAXD patterns, were lower in comparison to values obtained in previous studies on fibers that did not feature these hollows [9] because of the development of these internal hollows. The PTT fibers in this study also displayed high toughness, about 465 MPa (3.5 cN/dtex) strength and about 40% elongation, and had excellent elastic recovery (>95%) after 10 stretch cycles. POLYM. ENG. SCI., 56:609–616, 2016. © 2015 Society of Plastics Engineers