Hierarchically Structured Magnetic Nanoconstructs with Enhanced Relaxivity and Cooperative Tumor Accumulation

Iron oxide nanoparticles are formidable multifunctional systems capable of contrast enhancement in magnetic resonance imaging, guidance under remote fields, heat generation, and biodegradation. Yet, this potential is underutilized in that each function manifests at different nanoparticle sizes. Here, sub‐micrometer discoidal magnetic nanoconstructs are realized by confining 5 nm ultra‐small super‐paramagnetic iron oxide nanoparticles (USPIOs) within two different mesoporous structures, made out of silicon and polymers. These nanoconstructs exhibit transversal relaxivities up to ≈10 times (r ₂ ≈ 835 mm ^?1 s^?1) higher than conventional USPIOs and, under external magnetic fields, collectively cooperate to amplify tumor accumulation. The boost in r ₂ relaxivity arises from the formation of mesoscopic USPIO clusters within the porous matrix, inducing a local reduction in water molecule mobility as demonstrated via molecular dynamics simulations. The cooperative accumulation under static magnetic field derives from the large amount of iron that can be loaded per nanoconstuct (up to ≈65 fg) and the consequential generation of significant inter‐particle magnetic dipole interactions. In tumor bearing mice, the silicon‐based nanoconstructs provide MRI contrast enhancement at much smaller doses of iron (≈0.5 mg of Fe kg^?1 animal) as compared to current practice.     

混合信号SoC设计的现状与未来

从消费电子市场最容易得到的经验是集成为王。移动型战胜便携型,掌上型战胜移动型,而衬衫口袋型又超过掌上型。即使像游戏机这类桌面设备,时髦的外形和低制造成本目标也要靠更高集成度才能实现。这一趋势并不限于低成本的消费电子产品。军用、汽     

Optical properties of Ge1-yCy alloys

The Ge_1-yC_y semiconductor alloy system offers promise as a material for use in heterostructure devices based on Si as well as other materials. We have grown Ge_1-y C_y alloys by solid source molecular beam epitaxy on Si substrates. Layer thicknesses ranged from 0.01 to 3 μm, and Auger electron spectroscopy and secondary ion mass spectrometry indicated C fractions up to 3 at. %. Optical absorption in the near-infrared region indicated a shift in the energy bandgap from that of Ge which was attributed to the effects of alloying. The dependence of the bandgap on composition was consistent with linear interpolations of the Ge and C conduction band minimums. We observed a fundamental absorption edge characteristic of an indirect bandgap material. Photoluminescence spectra at 11K of thick, relaxed layers indicated single broad peaks near the expected bandgap energy.     

Phase equilibria in InAsSbP quaternary alloys grown by liquid phase epitaxy

The quaternary alloy InAs_1−x−ySb_xP_y, lattice-matched to InAs, is a promising material for the production of infrared light sources for the detection of gases in the 2–4 μm region of the spectrum. In this work, thermodynamic phase equilibrium calculations have been carried out to determine the compositions required for liquid phase epitaxial growth and the extent of the miscibility gap in the solid material. For high band gap materials, the desired growth temperature is found to be intermediate between a low temperature required to grow P-rich solids and higher temperatures required to avoidspinodal decomposition. Conventional LPE growth at an intermediate temperature of 583°C is found to produce good material with high luminescence efficiency and excellent optical characteristics. Problems with phosphorus loss from the melt are also discussed and lower growth temperatures are found to considerably reduce this problem. Growth in the metastable region between the binodal and spinodal lines has been achieved with the production of phosphorus-rich solids with concentrations up to y = 0.445.     

Progress in CdZnTe substrate producibility and critical drivers of IRFPA yield originating with CdZnTe substrates

With the goal of maximizing the yield of infrared focal plane arrays (IRFPAs), Santa Barbara Research Center’s (SBRC) Infrared Materials Producibility Program (IRMP) has focused on assessing and improving the quality, yield, and throughput of CdZnTe substrates. A baseline detector lot was fabricated to identify the critical drivers of IRFPA yield coming from the substrates and to evaluate the quality and yield of the current vendor base for CdZnTe substrates. Substrate induced defects and impurities that can potentially affect device performance and operability were carefully mapped out in detail on 44 × 67 mm² size substrates, received from IRMP substrate vendors as well as SBRC. This paper will report on the correlations found between this substrate characterization data base and the IRFPA level defect distributions. Key results from these correlation studies are: (1) extended defects found on the substrates with the Nakagawa etch correlated well with responsivity reduction in the final IRFPA; (2) cross-hatch patterns that were evident in the responsivity map correlated well with similar features seen by x-ray topography on LPE double layers; and (3) a possible correlation of device performance (leakage current at 78K) with copper and lithium impurities in the substrate. Recent initiatives toward improving the quality and yield of the substrate growth process have focused on improving purity in the pre-growth charge preparation, modification of growth parameters to reduce defects and scaling up of the vertical Bridgman growth process from its current 67 mm diameter boule size to 92 mm diameter boules. Promising initial results from the large diameter boule growth process will be shown. The 92 mm diameter CdZnTe boule (6 kg charge) shows two predominant single crystal grains encompassing 75% of boule volume. Defect characterization of boules grown under baseline and modified conditions is discussed.     

Prelaunch calibrations of the Clouds and the Earth's Radiant EnergySystem (CERES) Tropical Rainfall Measuring Mission and Earth ObservingSystem morning (EOS-AM1) spacecraft thermistor bolometer sensors

The Clouds and the Earth's Radiant Energy System (CERES) spacecraft scanning thermistor bolometer sensors measure Earth radiances in the broadband shortwave solar (0.3-5.0 μm) and total (0.3->100 μm) spectral bands as well as in the 8-12-μm water vapor window spectral band. On November 27, 1997, the launch of the Tropical Rainfall Measuring Mission (TRMM) spacecraft placed the first set of CERES sensors into orbit, and 30 days later, the sensors initiated operational measurements of the Earth radiance fields. In 1998, the Earth Observing System morning (EOS-AM1) spacecraft will place the second and third sensor sets into orbit. The prelaunch CERES sensors' count conversion coefficients (gains and zero-radiance offsets) were determined in vacuum ground facilities. The gains were tied radiometrically to the International Temperature Scale of 1990 (ITS-90). The gain determinations included the spectral properties (reflectance, transmittance, emittance, etc.) of both the sources and sensors as well as the in-field-of-view (FOV) and out-of-FOV sensor responses. The resulting prelaunch coefficients for the TRMM and EOS-AM1 sensors are presented. Inflight calibration systems and on-orbit calibration approaches are described, which are being used to determine the temporal stabilities of the sensors' gains and offsets from prelaunch calibrations through on-orbit measurements. Analyses of the TRMM prelaunch and on-orbit calibration results indicate that the sensors have retained their ties to ITS-90 at accuracy levels better than ±0.3% between the 1995 prelaunch and 1997 on-orbit calibrations     

Raptor electrocutions

Distribution power line raptor electrocutions have been studied extensively since 1971. Numerous methods to modify power line structures to eliminate the potential for electrocutions have been developed, published, and utilized by the electric utility industry. Some of the modified overhead distribution line construction units have been adopted as standards by investor owned utilities and the Rural Utilities Service, dramatically reducing raptor electrocutions. Although utility construction practices have improved greatly since 1971, some raptor electrocutions still persist. Many utilities today are employing larger crossarms in their new construction to provide increased phase-to-phase and phase-to-ground separation to reduce the potential for electrocutions. Although an emphasis on providing increased phase separation may eliminate some electrocutions, uninsulated jumper wires may pose a greater threat to raptors. A review of utility raptor electrocution forms filed since 1985 indicates that overhead distribution power line poles configured with transformers and bare jumpers are associated with the most raptor electrocutions. Pole configurations and mitigation of raptor electrocutions are discussed     

Large-scale system testing of a power system dynamic equivalencingprogram

This paper presents the results of applying the EPRI Dynamic Equivalencing Program to a large-scale system test case of the New York Power Pool. The effects of coherent generator selection, network reduction, generator aggregation, and generator modeling on the accuracy of the reduced models are investigated     

Optimisation of enhancement layer DCT coefficients in MPEG-2 SNRscalable video

The authors describe an optimisation algorithm which can be applied to two-layer SNR scalable MPEG-2 video coding, such that bandwidth efficiency is achieved which is comparable to single-layer coding. Our optimised two-layer coder is shown to generate as little as 1% fewer bits than a single-layer coder compared to up to 15% more bits generated by the non-optimised SNR scalable coder     

Detection for a statistically known, time-varying dispersivechannel

Detection for the statistically known channel (SKC) is aimed at obtaining good performance in situations where our statistical knowledge of a time-varying channel is good, and where other equalization/detection schemes are either too complex to implement, or their performance is limited due to the rapidity of channel fading, or where we are simply unable to perform channel estimation. By using a statistical characterization of the channel, we develop a new detector that performs maximum-likelihood sequence estimation (MLSE) (given the channel model) on blocks of N symbols. Both symbol-spaced and fractionally spaced samples are used, to obtain two different detectors, that are generalizations of those devised for optimal block schemes on nondispersive channels. The detector that uses fractionally spaced samples is shown to outperform the detector that uses symbol-spaced samples. The performance of both appears to approach that of the corresponding known channel (KC) detector as the block length increases. We also numerically evaluate the SKC detector performance under conditions where the channel parameters (statistics) are incorrectly estimated, and show that the fractionally spaced detector is fairly robust to modeling errors. Finally, we devise a sliding block algorithm, for use when transmitting more than N symbols