Traumatogenic factors affecting the knees of carpet installers

An ergonomics analysis of carpet installation tasks was performed. The purpose was to identify and quality potential sources of biomechanical trauma that may be responsible for the high rates of knee morbidity found by previous researchers among carpet layers. Nine carpet layers were studied either at an apartment building worksite or at a training school. Results from a job analysis indicated that workers spent approximatately 75% of their time in the kneeling position using a tool called a knee-kicker to stretch and install carpet. Awkward body postures were identified from films of workers installing carpets. At the moment of impact the knee is severely flexed, subtended angles were less than 60 degrees. To obtain measures of impact force on the knee, the kicker-tool was instrumented with a load cell. Workers who executed the hardest kicks with the tool produced impact peak forces that averaged 3019 newtons (N), which is equivalent to about four times body weight. Measures from an accelerometer attached to the worker's knee showed values in ecxess of 120 m/s², which are comparable to those found during vigorous running and jumping exercises. The results imply that repetitive impact of the knee joint from the use of the knee-kicker combined with knee flexion, kneeling and squatting may be responsible for the high level of occupational knee-morbidity found among carpet layers.     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

NO reduction by CH4 over Pd/Co-sulfated zirconia catalysts

A series of sulfated zirconia supported Pd/Co catalysts was synthesized by the sol–gel method and examined for NO_x reduction by methane. The NO conversion increased up to a Co/S ratio of 0.43, and then decreased at a higher Co loading (Co/S = 0.95). Sulfate content was also essential for obtaining high selectivity to molecular nitrogen. A catalyst loaded with 0.06 wt.% Pd, 2.1 wt.% Co and 2.1 wt.% S (Pd/Co-SZ-2) exhibited remarkable performance under lean conditions and displayed stability in a long-term durability test using a synthetic reaction mixture containing 10% water vapor. This catalyst exhibited the highest sulfur retention most probably as cobalt sulfide. Besides, the catalytic oxidation of NO to NO_y groups was confirmed by FT-IR, in agreement with the general mechanism for the SCR of NO by hydrocarbons. In the absence of oxygen in the feed stream, the catalyst was highly active for NO reduction with methane. IR stretching bands assigned to N₂O and adsorbed nitro groups were identified upon adsorbing NO on Pd/Co-SZ-2. This indicates that under rich conditions disproportionation of NO to N₂O and NO₂ occurs and confirms that the formation of NO₂ species is an essential step for NO reduction by CH₄.     

The effect of specific β‐nucleation on morphology and mechanical behavior of isotactic polypropylene

The commercial grade of isotactic polypropylene was modified by a specific β‐nucleating agent in a broad concentration range. The supermolecular structure of the specimens prepared by injection molding was characterized by X‐ray scattering and correlated with mechanical behavior. It was found that at a critical nucleant concentration of 0.03 wt % the content of the β‐modification virtually reaches a saturation level. With further addition of the nucleant, the β‐phase content increases only slightly. The long period passes through a distinct maximum at the same nucleant concentration. This singularity in structure remarkably correlates with a minimum of the yield stress and maxima of strain at break and fracture toughness. Such general behavior is also reflected in the correlation between the β‐phase concentration and fracture toughness profiles along the injection‐molded bars. It is suggested that in the critically nucleated material an optimum thickness of the amorphous interlayer with connecting chains between the β‐crystallites is established, rendering the material the highest possible ductility and toughness. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1174–1184, 2002     

Influence of sources of dietary oils on the life span of stroke-prone spontaneously hypertensive rats

In recent studies, the life span of stroke-prone spontaneously hypertensive (SHRSP) rats was altered by a variety of dietary fats. It was relatively shorter in rats fed canola oil as the sole source of fat. The present study was performed to find out whether the fatty acid profile and the high content of sulfur compounds in canola oil could modulate the life span of SHRSP rats. SHRSP rats (47 d old, n=23/group) were matched by body weight and systolic blood pressure and fed semipurified diets containing 10% canola oil, high-palmitic canola oil, low-sulfur canola oil, soybean oil, high-oleic safflower oil, a fat blend that mimicked the fatty acid composition of canola oil, or a fat blend high in saturated fatty acids. A 1% sodium chloride solution was used as drinking water to induce hypertension. After consuming the diets for 37 d, five rats from each dietary group were killed for collection of blood and tissue samples for biochemical analysis. The 18 remaining animals from each group were used for determining their life span. The mean survival time of SHRSP rats fed canola oil (87.4±4.0 d) was not significantly different (P>0.05) from those fed low-sulfur canola oil (89.7±8.5 d), suggesting that content of sulfur in canola oil has no effect on the life span of SHRSP rats. The SHRSP rats fed the noncanola oil-based diets lived longer (mean survival time difference was 6–13 d, P<0.05) than those fed canola and low-sulfur canola oils. No marked differences in the survival times were observed among the noncanola oil-based groups. The fatty acid composition of the dietary oils and of red blood cells and liver of SHRSP rats killed after 37 d of treatment showed no relationship with the survival times. These results suggest that the fatty acid profile of vegetable oils plays no important role on the life span of SHRSP rat. However, phytosterols in the dietary oils and in liver and brain were inversely correlated with the mean survival times, indicating that the differential effects of vegetable oils might be ascribed, at least partly, to their different phytosterol contents.     

The role ofAzolla in curbing ammonia volatilization from flooded rice systems

By the year 2020, an additional 300 million tons of rice are needed annually to meet the demands of a growing population. If our natural resource base is to be preserved, intensification strategies should rely on integrated nutrient management, making full use of biological nitrogen fixation. TheAzolla-Anabaena complex is amongst the most effective systems of fixing nitrogen. In this paper we present evidence from greenhouse studies on the potential ofAzolla to curb the volatilization of NH₃ following the application of urea to a mixedAzolla-rice culture, providing a new incentive for developing ways of integratingAzolla in intensive rice cultivation systems.The results of a series of short term greenhouse experiments show that a full cover ofAzolla can significantly reduce losses of applied urea-N from 45 and 50% to 20 and 13% for the 30 and 60 kg N ha^–1 treatments, respectively. About one-quarter of the applied N was tied up in theAzolla biomass. The applied N inhibitedAzolla growth as well as the amount of N fixed. Inoculation with smaller quantities ofAzolla allowing for more vigorousAzolla multiplication was equally effective in reducing NH₃ volatilization and doubled the amount of¹⁵N tied-up byAzolla. The reduction in NH₃ volatilization is largely related to the depression byAzolla of the floodwater pH, which in its absence may reach values between 9 and 10 as a result of algal activity.Early rice growth responded positively to urea as well as the large quantities of appliedAzolla and increased the yield potential of the crop. Smaller quantities ofAzolla alone were not effective in this regard. The conservation of fertilizer N byAzolla, particularly when it fully covered the water, was reflected in a synergistic effect on rice dry matter production, amounting to 9% at the 30 kg N rate and 16% at the 60 kg N rate. In all likelihood this interaction is attributable to the higher efficiency of the applied N. The benefits ofAzolla in conserving basal urea-N even in small quantities (200-500 kg fresh material ha^–1), outweighed competition for the applied N and may be as important as its BNF. The most promising integratedAzolla/rice management systems emerging from our studies should be given further attention under field conditions.     

Engineering plastics from lignin. XVI. Starlike macromers with propylene oxide

Starlike macromers were prepared from hydroxypropyl organosolv lignin by reaction with propylene oxide, and they were analyzed by a combination of conventional analysis techniques. The average number of arms per macromer was controlled by partial capping with an alkoxy group; and the average length of arms by the degree of chain extension with propylene oxide. Analysis methods included treatment with hydriodic acid followed by gas chromatographic separation of alkyl iodides (HI/GC), UV spectroscopy, H-NMR spectroscopy, and thermal analysis. The results were consistent with a hypothetical pentameric model structure having between two and six radiating arms, each with a length of between 1 and 4 propylene oxide units. The UV method was best qualified to determine degree of chain extension, while HI/GC was best suited for analyzing average number of arms per macromer fragment. The synthesis and analysis of starlike macromers from lignin is viewed as an important stepping stone for the formulation of lignin-based engineering plastics and multiphase materials.     

Infrared heated μ-blistering,a new fabrication technology for HARMST

Polymeric replication technologies such as injection moulding or hot-embossing have gained wide acceptance in the microtechnological community, microthermoforming of thin polymer foils, also called μ-blistering, still remains relatively unknown. Although the general potentials of the µ-blistering have already been pointed out, little work has been carried out addressing its capability for high aspect ratio microstructuring. In the scope of this work we therefore demonstrate the feasibility of μ-blistering to obtain aspect ratios for free standing structures of up to 7 within a process cycle time of <4 min. The presented processing technology uniquely combines manufacturing of macro-, micro- and even nanoscopic feature sizes in a single process.     

Engineering plastics from lignin. XV. Polyurethane films from chain-extended hydroxypropyl lignin

A series of polyurethane (PU) films was prepared from chain-extended hydroxypropyl lignins (CEHPL). In appearance, these films ranged from brittle and dark brown to rubbery and bronze. The thermal, mechanical, and network properties of these PUs were investigated by DMTA and DSC analysis. All films exhibited single T_g's which varied between ?53° and 101°C, depending on lignin content. From swelling experiments, molecular weight between crosslinks (M _c) was determined and found to vary over 2.5 orders of magnitude. The M _c's were related to the change in T_g that accompanied network formation. Stress–strain experiments showed a variation in Young's modulus between 7 and 1300 MPa. Most of the variation in material properties was related to lignin content and to a lesser extent to diisocyanate type, hexamethylene diisocyanate, or toluene diisocyanate. The source of the CEHPL had no effect on the observed properties. From these results it was concluded that the properties of PUs can be controlled and engineered for a wide variety of practical uses.