Power- and time-aware buffer cache management for real-time embedded databases

Due to the explosive increases of data from both the cyber and physical worlds, the demand for database support in embedded systems is increasing. Databases for embedded systems, or embedded databases, are expected to provide timely in situ data services under various resource constraints, such as limited energy. However, traditional buffer cache management schemes, in which the primary goal is to minimize the number of I/O operations, is problematic since they do not consider the constraints of modern embedded devices such as limited energy and distinctive underlying storage. In particular, due to asymmetric read/write characteristics of flash memory-based storage of modern embedded devices, minimum buffer cache misses neither coincide with minimum power consumption nor minimum I/O deadline misses. In this paper we propose a novel power- and time-aware buffer cache management scheme for embedded databases. A novel multi-dimensional feedback control architecture is proposed and the characteristics of underlying storage of modern embedded devices is exploited for the simultaneous support of the desired I/O power consumption and the I/O deadline miss ratio. We have shown through an extensive simulation that our approach satisfies both power and timing requirements in I/O operations under a variety of workloads while consuming significantly smaller buffer space than baseline approaches.     

The European,Japanese and US protective helmet,gloves and boots for firefighters: thermoregulatory and psychological evaluations

The purpose of this study was to investigate the physiological and subjective responses of the European, Japanese (JPN) and US firefighters' helmet, gloves and boots for international standardisation. Three experimental conditions were evaluated (clothing mass: 9.4, 8.2 and 10.1 kg for the three conditions, respectively) at the air temperature of 32°C and 60% relative humidity. The results showed that there was no significant difference among the three conditions in oxygen consumption, heart rate, total sweat rate, rectal temperature and mean skin temperature, whereas peripheral temperatures and subjective perceptions were lower in the JPN condition than in the other conditions (P < 0.05). These results indicate that a 0.5-kg reduction in helmet mass and a 1.1-kg reduction in boot mass during exercise resulted in a significant decrease in head and leg temperatures and subjective perceptions, while a 1.9-kg reduction in total clothing mass had insignificant influences on the metabolic burden and overall body temperature.     

Gate location design in injection molding of an automobile junction box with integral hinges

Polymers such as polypropylene or polyethylene offer a unique feature of producing an integral or living hinge for automobiles, which can flex over a million times without causing a failure. However, due to increased fluidity resistance at hinges during molding, several defects such as short shot or premature failure can occur with the improper selection of gate locations. In this paper, a design guideline was induced by investigating resin flow patterns depending on several gate positions obtained by numerical analyses of a simple strip with a hinge. The analyses of the simple strip part showed that the resin at the hinge did not flow until the other side of the strip was filled. Once the resin at the hinge did not flow for a long time enough to be solidified, defects such as short shots or hesitation marks formed. For a practical application of the design guideline determined, four gate systems for an automobile junction box were designed. It was found that the properly determined gate location leads to better resin flow and shorter hesitation time. Finally, injection molding tryouts using a mold that was designed by one of the proposed gate systems were conducted. The experiments showed that hinges without defects could be produced by using the designed gate location to assure the induced design guideline to be reasonable.     

Short packet communication in underlay cognitive network assisted by an intelligent reflecting surface

We propose short packet communication in an underlay cognitive radio network assisted by an intelligent reflecting surface (IRS) composed of multiple reconfigurable reflectors. This scheme, called the IRS protocol, operates in only one time slot (TS) using the IRS. The IRS adjusts its phases to give zero received cumulative phase at the secondary destination, thereby enhancing the end-to-end signal-to-noise ratio. The transmitting power of the secondary source is optimized to simultaneously satisfy the multi-interference constraints, hardware limitations, and performance improvement. Simulation and analysis results of the average block error rates (BLERs) show that the performance can be enhanced by installing more reconfigurable reflectors, increasing the blocklength, lowering the number of required primary receivers, or sending fewer information bits. Moreover, the proposed IRS protocol always outperforms underlay relaying protocols using two TSs for data transmission, and achieves the best average BLER at identical transmission distances between the secondary source and secondary destination. The theoretical analyses are confirmed by Monte Carlo simulations.     

Some peculiarities of electric discharge between a solid electrode and technical water

We present the results of experimental study of the electric discharge between metal electrodes of various geometry and technical water within the pressure range of 8 × 10³–10⁵ Pa at the saw-tooth voltage generator frequency, f = 40 MHz, and the interelectrode distance, l = 3–30 mm. We consider transfer of the streamer discharge into spark one depending on the geometry of the metal electrode and its material. We investigate the electrical characteristics of the discharge between the plate electrode and the technical water within a wide pressure range. The essential influence of the streamer discharge type on the ozone release within the investigated parameters range is discovered.     

Erratum to: Charge transfer in graphene/polymer interfaces for CO2 detection

Nano Research - The order of the authors in the original version of this article was unfortunately incorrect on the first page and the first page of the ESM. Instead of Myungwoo Son1, Yusin Pak1,...     

A Hemispherical Image Sensor Array Fabricated with Organic Photomemory Transistors

Hemispherical image sensors simplify lens designs, reduce optical aberrations, and improve image resolution for compact wide-field-of-view cameras. To achieve hemispherical image sensors, organic materials are promising candidates due to the following advantages: tunability of optoelectronic/spectral response and low-temperature low-cost processes. Here, a photolithographic process is developed to prepare a hemispherical image sensor array using organic thin film photomemory transistors with a density of 308 pixels per square centimeter. This design includes only one photomemory transistor as a single active pixel, in contrast to the conventional pixel architecture, consisting of select/readout/reset transistors and a photodiode. The organic photomemory transistor, comprising light-sensitive organic semiconductor and charge-trapping dielectric, is able to achieve a linear photoresponse (light intensity range, from 1 to 50 W m⁻²), along with a responsivity as high as 1.6 A W⁻¹ (wavelength = 465 nm) for a dark current of 0.24 A m⁻² (drain voltage = −1.5 V). These observed values represent the best responsivity for similar dark currents among all the reported hemispherical image sensor arrays to date. A transfer method was further developed that does not damage organic materials for hemispherical organic photomemory transistor arrays. These developed techniques are scalable and are amenable for other high-resolution 3D organic semiconductor devices.     

Transformation of a thin-walled solid model into a surface model via solid deflation

A simplified geometric model with lower dimensionality, such as a mid-surface model, is often preferred over a detailed solid model for the analysis process, if the analysis results are not seriously impacted. In order to derive a mid-surface model from a thin-walled solid model, in this paper, we propose a novel approach called the solid deflation method. In this method, a solid model is assumed to be created by using air to inflate a shell that comprises the surface of the solid model. First, the model is simplified by the removal of any detailed features whose absence would not alter its overall shape. Next, the solid model itself can be converted into a degenerate solid model with zero thickness. Finally, a surface model is generated by splitting large faces paired in the thinned solid model, selecting one face per pair for creating a sheet model, and sewing the selected faces. Using this method, a more practical and usable mid-surface model can be very efficiently generated from a solid model because it can circumvent not only the tedious trimming and extension processes of the medial axis transformation method but also the time-consuming patch joining process of the mid-surface abstraction approach.     

Binding conformation prediction between human acetylcholinesterase and cytochrome c using molecular modeling methods

The acetylcholinesterase (AChE) is important to terminate acetylcholine-mediated neurotransmission at cholinergic synapses. The pivotal role of AChE in apoptosome formation through the interactions with cytochrome c (Cyt c) was demonstrated in recent study. In order to investigate the proper binding conformation between the human AChE (hAChE) and human Cyt c (hCyt c), macro-molecular docking simulation was performed using DOT 2.0 program. The hCyt c was bound to peripheral anionic site (PAS) on hAChE and binding mode of the docked conformation was very similar to the reported crystal structure of the AChE and fasciculin-II (Fas-II) complex. Two 10ns molecular dynamics (MD) simulations were carried out to refine the binding mode of docked structure and to observe the differences of the binding conformations between the absent (Apo) and presence (Holo) of heme group. The key hydrogen bonding residues between hAChE and hCyt c proteins were found in Apo and Holo systems, as well as each Tyr341 and Trp286 residue of hAChE was participated in cation-pi (π) interactions with Lys79 of hCyt c in Apo and Holo systems, respectively. From the present study, although the final structures of the Apo and Holo systems have similar binding pattern, several differences were investigated in flexibilities, interface interactions, and interface accessible surface areas. Based on these results, we were able to predict the reasonable binding conformation which is indispensable for apoptosome formation.