Effects of estrogen-induced hyperlipidemia on the erythrocyte membrane in chicks

The effects of estrogen-induced hyperlipidemia on plasma lipid peroxidation, fatty acid composition and osmotic fragility of erythrocytes in chickens were studied. Young male chickens implanted with estrogen for three wk developed a marked hyperlipidemia. Plasma levels of triglyceride, cholesterol and phospholipid were elevated 68-, four- and 24-fold, respectively, over controls. There was also a two-fold increase in plasma lipid peroxidation measured by the thiobarbituric acid test. Vitamin E supplement (1,000 IU/kg diet) reduced the plasma lipid peroxidation to the control level, but had no effect on the plasma lipid content. Estrogen-induced hyperlipidemia resulted in changes in the fatty acid composition of membrane lipids of erythrocytes. The major changes were an increase in oleic acid from 10.0% to 14.2% and a decrease in linoleic acid from 31.3% to 26.0%. The erytrocytes with an altered membrane fatty acid composition were found to have an increased osmotic fragility. It was apparent that there was a direct correlation between the oleic acid content and the osmotic fragility of erythrocytes.     

Electrophoretic deposition of carbon nanotubes

Electrophoretic deposition (EPD) has been gaining increasing interest as an economical and versatile processing technique for the production of novel coatings or films of carbon nanotubes (CNTs) on conductive substrates. The purpose of the paper is to present an up-to-date comprehensive overview of current research progress in the field of EPD of CNTs. The paper specifically reviews the preparation and characterisation of stable CNT suspensions, and the mechanism of the EPD process; it includes discussion of pure CNT coatings and CNT/nanoparticle composite films. A complete discussion of the EPD parameters is presented, including electrode materials, deposition time, electrode separation, deposition voltage and resultant electric field. The paper highlights potential applications of the resulting CNT and CNT/composite structures, in areas such as field emission devices, fuel cells, and supercapacitors.     

Enhanced surface morphologies of screen-printed carbon nanotube films by heat treatment and their field-emission properties

A heating process for obtaining free-standing carbon nanotube emitters is presented with the aim of improving field-emission properties from the screen-printed multiwalled carbon nanotube (MWCNT) films. Using an atmosphere with an optimum combination of nitrogen and air for heat treatment of CNT films, the CNT emitters can be made to protrude from the surface. This allows for a high emission current and the formation of very uniform emission sites without special surface treatment. The morphological change of the CNT film by this technique has eliminated additional processing steps, such as surface treatment which may result in secondary contamination and damage to the film. Despite its simplicity the process provides a high reproducibility in emission current density which makes the films suitable for practical applications.     

Synthesis and characterization of poly(1,8-diethynylnaphthalene)

Summary The cyclopolymerization of 1,8-diethynylnaphthalene(DEN) and its copolymerization with diethyl dipropargylmalonate(DEDPM) were carried out by various transition metal catalysts. MoCl₅-based catalyst was found to be very effective and gave almost a quantitative polymer yield. The resulting dark-brown homopolymer(PDEN) was partially soluble in chloroform, tetrahydrofuran, and dimethyl sulfoxide, whereas copolymer (1:1) with number avaerage molecular weight of 2.1x10⁴ by GPC showed good solubility in those solvents. The structure of the polymers was analysed by IR, NMR, and UV-VIS spectroscopies. From the spectral and solubility data, it is proposed that cyclized products with the conjugated system are formed. Room temperature conductivities of the I₂-doped homo and copolymer were found to be about 7.5x10^-3 and 5.1x10^-3 S/cm, respectively.     

Adsorption and desorption characteristics of 2-methyl-4-chlorophenoxyacetic acid onto activated carbon

Adsorption and desorption characteristics of the 2-methyl-4-chlorophenoxyacetic acid (MCPA) from aqueous solution onto the activated carbon (GAC, F-400) were studied. Adsorption equilibrium capacities of the MCPA increased with decreasing pH and temperature of the solution. Adsorption equilibrium of the MCPA could be represented by the Sips equation. The internal diffusion coefficients were determined by comparing the experimental concentration decay curves with those predicted from surface diffusion model and pore diffusion model. The adsorption model based on the linear driving force approximation (LDFA) was used for simulating the adsorption behavior of the MCPA in a fixed bed. Over ninety five percent desorption of the MCPA could be obtained using distilled water.     

Transport of oxygen and carbon dioxide through polycarbonate membrane

Sorption equilibria and permeation rates for oxygen and carbon dioxide in polycarbonate membrane were measured at different temperature between 30 and 60°C and at pressures up to 2.5 MPa. The pressure dependence of mean permeability coefficient to oxygen obeyed the conventional dual-mode mobility model, whereas that to carbon dioxide followed a modified dual-mode mobility model with concentration-dependent diffusivities, as that of polystyrene to the same gas did.     

Virtual target tracking of mobile robot and its application to formation control

A virtual target tracking approach is proposed for kinematic control of mobile robot. In the controller, linear and angular velocity inputs are generated by using the local data of robot position and orientation along with the estimated velocity of target object. Applying the proposed approach to a cooperative robot group with arbitrary number of multiple mobile robots, it is possible to create various robot formations for cooperative navigation and tracking of moving object. The developed controller is shown to be stable and convergent through theoretical proof and a series of experiments.     

Synthesis and properties of acrylonitrile-CR-methyl methacrylate graft copolymer

Graft copolymerization of acrylonitrile (AN) and methyl methacrylate (MMA) onto polychloroprene (CR) was carried out using benzoyl peroxide as initiator. The effects of mole ratio of AN to MMA, reaction temperature, reaction time, solvent, and initiator concentration on the graft copolymerization were examined. It was found that the thermal stability and weatherability of the AN—CR—MMA graft copolymer (ACM) were considerably better than those of CR.     

The effects of Ni and Li doping on the performance of lithium manganese oxide material for lithium secondary batteries

Layered Li_0.7[M_1/6Mn_5/6]O₂ (M=Li, Ni) was synthesized using a sol-gel method. P2-Na_0.7[M_1/6Mn_5/6]O₂ precursor was first synthesized by a sol-gel method, and then O2-Li_0.7[M_1/6Mn_5/6]O₂ was prepared by an ion exchange of Li for Na in P2-Na_0.7[M_1/6Mn_5/6]O₂ precursor. From charge/discharge curves, it was seen that Li_0.7[Li_1/6Mn_5/6]O₂ has two plateaus similar to those observed from a spinel structure, but Li_0.7[Ni_1/6Mn_5/6]O₂ holds a single plateau as observed from a typical layered structure. It was considered that Li_0.7[Li_1/6Mn_5/6]O₂ undergoes a phase transformation from layered to spinel structure during the charge/discharge cycle, but Li_0.7[Ni_1/6Mn_5/6]O₂ maintains O2-layered structure after the cycles. Li_0.7[Ni_1/6Mn_5/6]O₂ was higher in discharge capacity and retention rate than Li_0.7[Li_1/6Mn_5/6]O₂.