Site‐Selectively Coated,Densely‐Packed Microprojection Array Patches for Targeted Delivery of Vaccines to Skin

Densely packed dry‐coated microprojections are shown to deliver vaccines to targeted locations within the skin that are rich in immune cells, thus inducing protective immune responses against a lethal virus challenge. Selectively limiting the antigen coating to the tips of the projections, which penetrate the skin, would significantly reduce the amount of vaccine required in immunization. In this paper a simple technique, dip‐coating the microprojections, is introduced to meet this goal. By increasing the coating solution viscosity, an otherwise strong capillary action is mitigated and the desired controlled coating length on projections is achieved. Following application to the skin, most of the coated vaccine material is rapidly released from the projections (82.6% in mass within 2 min) to the target locations within the skin strata and a potent immune response is induced when a conventional influenza vaccine (Fluvax) is tested in a mouse model. The utility of this coating approach to a variety of molecules representative of vaccines (e.g., chicken egg ovalbumin (OVA) protein, DNA, and fluorescent dyes) is demonstrated. These collective attributes, together with the simplicity of the approach, position the dip‐coating method for practical utility in large vaccination campaigns.     

Correlated Quantum Phenomena of Spin–Orbit Coupled Perovskite Oxide Heterostructures: Cases of SrRuO3 and SrIrO3 Based Artificial Superlattices

Unexpected, yet useful functionalities emerge when two or more materials merge coherently. Artificial oxide superlattices realize atomic and crystal structures that are not available in nature, thus providing controllable correlated quantum phenomena. This review focuses on 4d and 5d perovskite oxide superlattices, in which the spin–orbit coupling plays a significant role compared with conventional 3d oxide superlattices. Modulations in crystal structures with octahedral distortion, phonon engineering, electronic structures, spin orderings, and dimensionality control are discussed for 4d oxide superlattices. Atomic and magnetic structures, J_eff = 1/2 pseudospin and charge fluctuations, and the integration of topology and correlation are discussed for 5d oxide superlattices. This review provides insights into how correlated quantum phenomena arise from the deliberate design of superlattice structures that give birth to novel functionalities.     

Indicator Sensor Development and Fuel Cell Degradation Imaging

Although extensive research has been conducted, understanding the exact phenomena occurring during the operation of polymer electrolyte fuel cells (PEFCs) remains difficult. This research attempted to identify new reasons for the reduced performance of PEFC using an imaging technique. To begin with, H⁺ and OH⁻ indicator sensors, which display red, blue, and green values (RGB) using digital microscopes, are developed and attached to each electrode of a membrane electrode assembly to enable quantitative analysis of ion generation. The proposed reaction in the fuel cell can be confirmed, and various reactions occurring in the electrode can be examined using this approach. In particular, H⁺ is generated at the anode and cathode of the anion exchange membrane fuel cell, which is found to be a major cause of performance deterioration.     

Fine‐Grained FSMD Power Gating Considering Power Overhead

As a fine‐grained power gating method for achieving greater power savings, our approach takes advantage of the finite state machine with a datapath (FSMD) characteristic which shows sequential idleness among subcircuits. In an FSMD‐based power gating, while only an active subcircuit is expected to be turned on, more subcircuits should be activated due to the power overhead. To reduce the number of missed opportunities for power savings, we deactivated some of the turned‐on subcircuits by slowing the FSMD down and predicting its behavior. Our microprocessor experiments showed that the power savings are close to the upper bound.     

Dependence of apparent resistance of four-electrode probes on insertion depth

The apparent resistance of a finite-thickness layer measured with a four-electrode plunge probe depends on the electrode insertion depth, electrode spacing, and layer thickness, as well as the resistivity ratio of an underlying layer. A physical model consisting of air, a saline solution layer, and an agar layer simulates the real situation of resistivity measurement. The saline layer represents the finite-thickness layer whose resistivity is to be measured by a plunge electrode probe, and the agar layer represents an underlying perturbing layer. A micropositioner controls the insertion depth of the four electrodes into the saline solution. With the apparent resistance measured on a semi-infinite-thickness layer of saline solution as standard, measurement results show decreasing apparent resistance and increasing error with increasing electrode insertion depth. This information is important for correct measurement of myocardial resistivity in vivo and in vitro.     

Design and Fabrication of Asymmetric MOSFETs Using a Novel Self-Aligned Structure

A novel asymmetric MOSFET with no lightly doped drain on the source side is simulated on bulk Si using a device simulator (SILVACO). To overcome the problems of the conventional asymmetric process, a novel asymmetric MOSFET using a mesa structure and a sidewall spacer gate is proposed, and it provides a self-alignment process, aggressive scaling, and better uniformity. First of all, we have compared the simulated characteristics of the asymmetric and symmetric MOSFETs. Basically, both asymmetric and symmetric MOSFETs have an n-type channel and the same physical parameters. Compared with the symmetric MOSFET, the asymmetric MOSFET shows better device performance. Moreover, we have successfully fabricated 50-nm asymmetric NMOSFETs based on simulation results and investigated its operation and characteristics.     

Surface Chemistry of Vitamin: Pyridoxal 5′‐Phosphate (Vitamin B6) as a Multifunctional Compound for Surface Functionalization

Vitamins are non‐toxic compounds that perform a variety of biological functions and also available in a large quantity. Other than the usage as food supplements, few attempts have been made to use them as functional materials. In this study, we report that vitamin B6, pyridoxal 5′‐phosphate (PLP), is a multi‐functional molecule for oxide surface chemistry. PLP‐immobilized surfaces exhibit superhydrophilicity and even hemophilicity, enhancing proliferation, migration, and differentiation of mammalian cells. Unlike existing molecules used so far in surface modification, PLP has an intrinsic chemical reactivity toward biomacromolecules due to the presence of the aldehyde group. In fact, RGD peptide is covalently tethered onto PLP surfaces directly in one step without any chemical activation. Furthermore, PLP‐functionalized implant device showed rapid bone healing. As vitamin B6 is a FDA approved molecule for human usage, the surface chemistry of vitamin B6 potentially allows a fast route for surface functionalized medical devices into clinic.     

Parallel optical transmitter module using angled fibers and a V-grooved silicon optical bench for VCSEL array

We propose an advanced structure of optical subassembly (OSA) for packaging of the vertical-cavity surface-emitting laser (VCSEL) array, using (111) facet mirror of the V-groove ends formed in a silicon optical bench (SiOB) and angled fiber apertures. The feature of our OSA can provide a low optical crosstalk between neighboring channels, a low feedback reflection, and a large misalignment tolerance along the V-groove. We describe the optimized design of fiber angle, VCSEL position, and fiber position. The fabricated OSA structure consists of 12 channels of angled fiber array, 54.7/spl deg/ V-grooves, Au-coated mirrors on (111) end facet of the V-grooves, and flip-chip-bonded VCSEL array on a SiOB. In this structure, the beam emitted from the VCSEL is deflected at the 54.7/spl deg/ mirror of (111) end facet and propagated into the angled fiber. The angled fiber array was polished by 57/spl deg/. Fabricated OSAs showed a coupling efficiency of 30%-50% that is 25 times larger than that obtained from an OSA with a vertically flat fiber array. Our OSA showed large misalignment tolerance of about 90 /spl mu/m along the longitudinal direction in the V-groove. We fabricated a parallel optical transmitter module using the OSA and demonstrated 12 channels /spl times/2.5 Gb/s data transmission with a clear eye diagram.     

Efficient methods for modelling substrate coupling in mixed-signalintegrated circuits

A key problem in the design of large mixed-signal circuits is the noise caused by the coupling of digital signals into the substrate. This paper describes methods that allow circuit designers to model efficiently such substrate noise in large mixed-signal SPICE designs. In the light of these techniques a new methodology is presented for efficiently modelling the substrate noise caused by current injection and its coupling to analogue signals; this is then extended to provide a real-time modelling capability. The practicality and the numerical efficiency of the methods are demonstrated on several prototype example circuits