韩国首尔圣玛丽医院

首尔圣玛丽医院力争与世界上技术最先进的医院匹敌,成为最大的天主教医疗建筑,并为天主教会树立医疗设施的典范。新建的首尔圣玛丽医院共28层,天主教医学中心邀请了许多重要人士参加其盛大的开业典礼     

Triarylamine-based dual-function coadsorbents with extended π-conjugation aryl linkers for organic dye-sensitized solar cells

Triarylamine-based dual-function coadsorbents containing a carboxylic acid acceptor linked by extended π-conjugation aryl linkers (e.g., phenylene: HC-A3, naphthalene: HC-A4 and anthracene: HC-A5) were newly designed and synthesized. They were used as coadsorbents in organic dye-sensitized solar cells (DSSCs) based on a porphyrin dye (hexyloxy-biphenyl-ZnP-CN-COOH (HOP)). For comparison, the π-conjugated phenyl linker (HC-A3) previously developed by our group was also used as a coadsorbent. The structural effects on the photophysical and electrochemical properties and DSSC performance were systematically investigated. As a result, the DSSCs based on HC-A4 and HC-5 displayed power conversion efficiencies (PCEs) of 8.2% and 5.1%, respectively, while the HC-A3-based DSSC achieved a PCE of 7.7%. In the case of HC-A4, both the short-circuit photocurrent densities (J_sc) and open-circuit voltages (V_oc) of DSSCs were simultaneously improved to a large extent due to the more effective prevention of π−π stacking of organic dye molecules and the better light-harvesting effect at short wavelengths. The HC-A5-based DSSC exhibited a much lower short-circuit current (J_sc) and open-circuit voltages (V_oc) compared to the HC-A4-based DSSC, due to the fact that the dihedral angle of the π-conjugated linkers was too high for electron injection into the TiO₂ conduction band (CB) level. This had a reduced effect on preventing the π−π stacking of dye molecules, resulting in lower J_sc and V_oc values.     

Highly Fluorescent and Color‐Tunable Exciplex Emission from Poly(N‐vinylcarbazole) Film Containing Nanostructured Supramolecular Acceptors

Highly fluorescent excited‐state charge‐transfer complexes (exciplexes) formed at the interfacial region between a polymeric donor matrix, here, poly(N‐vinylcarbazole), and embedded nanostructured acceptors are characterized for their photophysical properties. Exciplex‐to‐exciton emission switching is observed after solvent vapor annealing (SVA) due to the size evolution of the nanostructures beyond the exciton diffusion length. Color‐tunable exiplex emission (sky blue, green, and orange) is demonstrated for three different nanostructured acceptors with the same HOMO–LUMO gap (i.e., the same blue excitonic emission) but with different electron affinity. White‐emitting poly(N‐vinylcarbazole) film is also fabricated, simply by incorporating mixed supramolecular acceptors, which provide independent exciplex emissions. This study presents important insights into the excited‐state intermolecular interaction at the well‐defined nanoscale interface and suggests an efficient way to obtain multicolored exciplex emissions.     

Three‐Dimensional Branched Nanowire Heterostructures as Efficient Light‐Extraction Layer in Light‐Emitting Diodes

A facile method to fabricate three‐dimensional branched ZnO/MgO nanowire heterostructures and their application as the efficient light‐extraction layer in light‐emitting diodes are reported. The branched MgO nanowires are produced on the hydrothermally‐grown ZnO nanowires with a small tapering angle towards the tip (≈6°), by the oblique angle flux incidence of MgO. The structural evolution during the growth verifies the formation of the MgO nanoscale islands with strong (111) preferred orientation on very thin (5–7 nm) MgO (110) layer. The MgO nanobranches, then grown on the islands, are polycrystalline consisting of many grains oriented in specific directions of <200> and <220>, supported by the nucleation theory. The LEDs with the branched ZnO/MgO nanowire arrays show a remarkable enhancement in the light output power by 21% compared with that of LEDs with pristine ZnO nanowires. Theoretical calculations using a finite‐difference time‐domain method reveal that the nanostructure is very effective in breaking the wave‐guiding mode inside the ZnO nanowires, extracting more light especially in radial direction through the MgO nanobranches.     

All‐Solution‐Processed Indium‐Free Transparent Composite Electrodes based on Ag Nanowire and Metal Oxide for Thin‐Film Solar Cells

Fully solution‐processed Al‐doped ZnO/silver nanowire (AgNW)/Al‐doped ZnO/ZnO multi‐stacked composite electrodes are introduced as a transparent, conductive window layer for thin‐film solar cells. Unlike conventional sol–gel synthetic pathways, a newly developed combustion reaction‐based sol–gel chemical approach allows dense and uniform composite electrodes at temperatures as low as 200 °C. The resulting composite layer exhibits high transmittance (93.4% at 550 nm) and low sheet resistance (11.3 Ω sq^‐1), which are far superior to those of other solution‐processed transparent electrodes and are comparable to their sputtered counterparts. Conductive atomic force microscopy reveals that the multi‐stacked metal‐oxide layers embedded with the AgNWs enhance the photocarrier collection efficiency by broadening the lateral conduction range. This as‐developed composite electrode is successfully applied in Cu(In_1‐x,Ga_x)S₂ (CIGS) thin‐film solar cells and exhibits a power conversion efficiency of 11.03%. The fully solution‐processed indium‐free composite films demonstrate not only good performance as transparent electrodes but also the potential for applications in various optoelectronic and photovoltaic devices as a cost‐effective and sustainable alternative electrode.     

A Colorimetric Hydrocarbon Sensor Employing a Swelling‐Induced Mechanochromic Polydiacetylene

Exceptional challenges have confronted the rational design of colorimetric sensors for saturated aliphatic hydrocarbons (SAHCs). The main reasons for this difficulty are the extremely nonpolar nature of these targets and their lack of functional groups that can interact with probes. By taking advantage of a mechanochromic conjugated polydiacetylene (PDA) and the hydrocarbon‐induced swelling properties of polydimethylsiloxane (PDMS), a sensor film that enables simple, colorimetric differentiation between a variety of C5 to C14 aliphatic hydrocarbons is fabricated. The unprecedented PDA–PDMS composite sensor undergoes a blue‐to‐red colorimetric transition on a timescale that is dependent on the chain length of the hydrocarbon target. In addition, the development of the red color is directly proportional to the swelling ratio of the film. This straightforward approach enables naked‐eye differentiation between n‐pentane and n‐heptane. The versatility of the sensor system is demonstrated by using it for the colorimetric determination of kerosene in adulterated diesel oil. Finally, the observation that a PDA microcrystal in the film undergoes significant expansion and tearing in concert with a blue‐to‐red colorimetric transition during the swelling process provides direct evidence for the mechanism for the mechanochromic behavior of the PDA.     

Fast Switching ITO Free Electrochromic Devices

Indium‐doped tin oxide free electrochromic devices are prepared by coating electrochromic polymers onto polyethylene terephthalate substrates encompassing two different silver grids as electrodes. One design comprises a flexoprinted highly conductive silver grid electrode, yielding electrochromic devices with a response time of 2 s for an optical contrast of 27%. The other design utilizes an embedded silver grid electrode whereupon response times of 0.5 s for a 30% optical contrast are realized when oxidizing the device. A commercially available conductive poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate acid) formulation (PEDOT:PSS) is coated onto the silver grids as a charge balancing polymer, and is in this setting found to be superior to a polypyrrole previously employed in electrochromic devices. In addition, the PEDOT:PSS layer increases the conductivity in the hexagonal grid structure.     

Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.     

Relaxor/Ferroelectric Composites: A Solution in the Quest for Practically Viable Lead‐Free Incipient Piezoceramics

Recently developed lead‐free incipient piezoceramics are promising candidates for off‐resonance actuator applications with their exceptionally large electromechanical strains. Their commercialization currently faces two major challenges: high electric field required for activating the large strains and large strain hysteresis. It is demonstrated that design of a relaxor/ferroelectric composite provides a highly effective way to resolve both challenges. Experimental results in conjunction with numerical simulations provide key parameters for the development of viable incipient piezoceramics.