Finite element modeling of electrode-skin contact impedance inelectrical impedance tomography

In electrical impedance tomography (EIT), the measured voltages are sensitive to electrode-skin contact impedance because the contact impedance and the current density through it are both high. Large electrodes were used to provide a more uniform current distribution and reduce the contact impedance. A large electrode differs from a point electrode in that it has shunting and edge effects that cannot be modeled by a single resistor. The finite-element method (FEM) was used to study the electric field distributions underneath an electrode, and three models were developed: a FEM model, a simplified FEM model, and a weighted load model. The FEM models considered both shunting and edge effects and closely matched the experimental measurements. It is concluded that FEM models of electrodes can be used to improve the performance of an electrical impedance tomography reconstruction algorithm     

Effect of surface modification of anode with surfactant on the performance of microbial fuel cell

Surface modification of anode using surfactant has great influence on the electrical performance of a microbial fuel cell (MFC). In this study, the effect of surface‐modified exfoliated graphite used for anode fabrication on a cube‐type MFC batch reactor was examined. The surface exfoliated graphite was modified with 5‐mM anionic surfactant, sodium dodecyl sulfate. Anaerobic sludge used as inoculum containing 70% (v/v) of artificial wastewater and 30% (v/v) of seed sludge in an anode chamber and air cathode was used in cathode side. Anode modification was explored as an approach to enhance the start‐up and improve the performance of the reactor. Scanning electron microscopy was used to evaluate the morphology and activity of electrochemically active bacteria. In the study, the start‐up time of MFC required to approach stable voltage was substantially reduced, and the maximum stable voltage was higher than the control. In addition, the activation resistance of the MFC was considerably reduced, and the maximum power density (1640 mW/m²) was 20% higher than control. However, when the surface of exfoliated graphite was modified with over 10‐mM anionic surfactant, some negative effects on start‐up time, activation resistance and maximum power density were observed. This modification also enhanced the bacterial attachment and biofilm formation on the modified anode surface. The result suggested that surface modification anode with surfactant is effective for electrical responses achieved in the MFC. Copyright © 2015 John Wiley & Sons, Ltd.     

Did a local distribution company procure prudently during the California electricity crisis?

To manage cost risk, prudent procurement of electric power requires that some portion of a buyer's energy demand be met through long-term contracting. Under cost-of-service regulation or performance-based regulation, a local distribution company (LDC) should be allowed to fully recover all prudently incurred power procurement costs. However, the regulatory test of prudence is an ex post review with the threat of disallowance. This paper presents an economic analysis of procurement prudence involving a small LDC, Bear Valley Electric Service (BVES), which serves a resort area in Southern California. The key findings are: (a) high and volatile prices and rolling blackouts characterized the market environment faced by the owner of BVES, Southern California Water Company (SCWC), at its signing of a 5-year fixed price contract; (b) SCWC was a price-taker with no incentive to act imprudently; (c) the contract was obtained via a competitive bidding process; (d) the contract price was comparable to the benchmark price of contemporaneous contracts; (e) the fixed price contract was economic when compared to available alternatives; and (f) despite (a)–(e), a negotiated settlement with the state regulator and a large user resulted in substantial disallowance. The policy implication is that a regulator should approve a prudent procurement plan proposed by an LDC to remove the unreasonable risk of an ex post review. If the LDC strictly adheres to the plan, the resulting electricity purchases are per se prudent and should entitle the LDC to full cost recovery.     

Thermodynamic Analysis of Chemical Vapor Deposition of BN + AIN Composite Coatings

Thermodynamic calculations were performed using a modified solgasmix-pv computer program in order to study the feasibility of codepositing boron nitride (BN) plus aluminum nitride (AIN) by chemical vapor deposition. Reactants considered were AICl₃, BCl₃ or B₂H₆, NH₃, and H₂. Deposition diagrams were generated for the BCl₃-AICl₃-NH₃ system over a range of processing conditions such as temperature, total system pressure, and reagent concentrations. Codeposition of BN + AIN was predicted by the calculations for temperatures in the range of 900 to 1700 K and pressures of 10.13 to 101.3 kPa. The predicted deposition efficiency at equilibrium was much higher for BN than for AlN at most reagent compositions. The AlN deposition efficiency increased with decreasing temperature and decreasing BCl₃ content, with increasing NH₃ content, or with the addition of H₂. Aluminum chlorides were found to be the dominant gaseous species.     

Interactive tree modeling and deformation with collision detection and avoidance

We present an interactive tree modeling and deformation system that supports an efficient collision detection and avoidance using a bounding volume hierarchy of sweep surfaces. Starting with conventional tree models (given as meshes), we convert them into sweep surfaces and deform their branches interactively while detecting and avoiding collisions with many other branches. Multiple tree models (sharing the same topology) can be generated with great ease using this sweep‐based approach, and they can serve as a basis for the generation of a multiparameter family of trees. We demonstrate the effectiveness of our approach in an automatic generation of similar trees, the colonization of trees to form a forest, and the tree growth, aging, and withering simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Modeling of semibatch direct esterification reactor for poly(ethylene terephthalate) synthesis

A comprehensive kinetic model for a semibatch direct esterification reactor has been developed. The solid-liquid equilibirium of terephthalic acid was considered in the modeling. Effects of the monomer feed ratio, reaction temperatures, and oligomer addition on the conversion, degree of polymerization, and the formation of diethylene glycol were studied. © 1996 John Wiley & Sons, Inc.     

Pre-electing a Leader in Distributed Networks

In this article the leader election algorithm based on the performance and operation rate of nodes and links is proposed.