Neutralizing capacity of bottom ash from municipal solid waste incineration of different particle size

This study measures the neutralizing capacity of bottom ash from municipal solid waste incineration of different particle sizes. We examine the effect of particle size on the weathering process, a method popularly used for stabilization of heavy metals in incineration of bottom ash. The distribution of particle sizes in municipal solid waste incineration bottom ash is rather broad, ranging from fine powder to as large as 40 mm in diameter. Although considered a by-product highly suitable as a road construction material, the high level of heavy metal leaching is an obstacle to its reuse. Weathering, a method used to reduce heavy metal leaching, is a lengthy process taking over thee months to complete. The chief reaction involved in weathering is carbonation occurring between Ca(OH)2 in bottom ash and CO₂(g) in the atmosphere. During this process, CaCO₃ is produced, causing the pH level to drop from over 12 to about 8.2 and reducing heavy metal leaching. In this paper, we attempt to determine the particle size best suited for reducing the period required for weathering bottom ash by identifying characteristics of different particle sizes that affect heavy metal leaching and neutralization.     

Wet oxidation of wastewater containing hydrocarbons by novel supported Pd catalysts

Pd catalysts supported on TiO₂, ZrO₂, ZSM-5, MCM-41 and activated carbon were used in catalytic wet oxidation of hydrocarbons such as phenol, m-cresol and m-xylene. It was found that the Pd/TiO₂ catalyst was highly effective in the wet oxidation of hydrocarbon. The activities of catalysts with various hydrocarbon species, catalyst support, oxidation state of catalyst performed in a 3-phase slurry reactor show that reaction on Pd surface is more favorable than that in aqueous phase and that the active site is oxidized Pd in catalytic wet air oxidation of hydrocarbons. Based on the experimental results, a plausible reaction mechanism of wet oxidation of hydrocarbons catalyzed over Pd/TiO₂ catalyst was proposed. This catalyst is superior to other oxide catalysts because it suppressed the formation of hardly-degradable organic intermediates and polymer.     

Experimental and theoretical study on H2/CO2 separation by a five-step one-column psa process

An experimental and theoretical study is performed for bulk separation of H₂/CO₂ mixture (70/30 volume %) by PSA process with zeolite 5A, a process widely used commercially in conjunction with the catalytic steam reforming of natural gas or naphtha. For the optimized adsorption conditions of PSA, the characteristics of adsorption/desorption characteristics have been studied through breakthrough and desorption experiments under various conditions. The purge-to-feed ratio is important to the H₂ product purity only at a long adsorption step time. H₂ could be concentrated from 70% in the feed to 99.99% at H₂ recovery of 67.5%. The results of all five steps in PSA are successfully predicted by the LDF model considering an energy balance and nonlinear isotherm. For the model, the effective diffusivities (D,) are obtained separately from the uptake curves of H₂ and CO₂. The Langmuir-Freundlich isotherm is used to correlate the experimental equilibrium data and is very well fitted to the results.     

Microstructural Evolution of Gas-Pressure-Sintered Si3N4 with Yb2O3 as a Sintering Aid

Microstructural evolution of gas-pressure-sintered Si₃N₄ with Yb₂O₃ as a sintering aid was observed. Microstructures typical for in situ toughened Si₃N₄, i.e., large elongated grains randomly distributed in a fine matrix, were observed. However, the size of the elongated grains near the surface was much larger than that at the center, resulting in two distinct regions: an inner region and an outer region. The smaller the amount of Yb₂O₃ added, the larger the difference in the size of the elongated grains between the outer and inner regions. The difference between microstructures was diminished when 16 wt% Yb₂O₃ was added. The microstructural change with Yb₂O₃ content was attributed to the evaporation of Yb-containing liquid phase from the surface.     

Time-slide window join over data streams

The join is an important operator in processing data streams. To produce outputs continuously over unbounded data streams, sliding windows are generally used to limit the scope of the join at a certain time. In the existing join algorithms, only a simple type of windows have been considered, which are updated whenever a new data item arrives on any input stream. On the other hand, a more common type of windows have not been addressed yet, whose intervals are updated periodically, i.e., slid by a predefined time interval. In this paper, we consider the time-slide windows in joining multiple data streams. The algorithm for the time-slide window join can vary according to (i) how frequently the join is evaluated and (ii) which structure is used for windowing. Regarding this, possible algorithms are discussed, and experimental results that compare their performances are provided in this paper.     

Fault identification for process monitoring using kernel principal component analysis

In this research, we develop a new fault identification method for kernel principal component analysis (kernel PCA). Although it has been proved that kernel PCA is superior to linear PCA for fault detection, the fault identification method theoretically derived from the kernel PCA has not been found anywhere. Using the gradient of kernel function, we define two new statistics which represent the contribution of each variable to the monitoring statistics, Hotelling's T²and squared prediction error (SPE) of kernel PCA, respectively. The proposed statistics which have similar concept to contributions in linear PCA are directly derived from the mathematical formulation of kernel PCA and thus they are straightforward to understand. The main contribution of this work is that we firstly suggest a fault identification method especially applicable to process monitoring using kernel PCA. To demonstrate the performance, the proposed method is applied to two simulated processes, one is a simple nonlinear process and the other is a non-isothermal CSTR process. The simulation results show that the proposed method effectively identifies the source of various types of faults.     

THERMAL CONVECTIVE INSTABILITY IN TRANSLUCENT POROUS MEDIA WITH RADIATIVE HEAT TRANSFER

The onset of thermal convection in a translucent porous layer is considered. Attention is focused on the effect of radiative heat transfer on the critical Rayleigh-Darcy number and the convection cell shape. If we consider the contribution of radiative heat transfer, the basic temperature profile is non-linear and the thermal convective instability is influenced by the ratio of conduction to radiation heat flux, the temperatures at the boundary surfaces, and radiative parameters such as wall emissivity, scattering albedo and extinction coefficient as well as the usual Rayleigh-Darcy number. Effects of these parameters on the onset of convective instability are investigated with the help of linear stability theory employing the Darcy's law and the radiative transport equation simplified by the P₁ approximation. The increased effective thermal conductivity due lo the radiation inhibits the onset of convection and causes increased critical Rayleigh-Darcy number and decreased convection cell size. The results of the present work may be exploited to find out the optimal diameter of aerogel pellets and the air pressure in the double pane window filled with the translucent silica aerogel granules to suppress natural convection.     

Ligand-binding domain of farnesoid X receptor (FXR) had the highest sensitivity and activity among FXR variants in a fluorescence-based assay

The farnesoid X receptor (FXR, NR1H4) has been recognized as an attractive therapeutic target because it is a nuclear hormone receptor that controls the expression level of cholesterol-7α-hydroxylase, which in turn regulates bile acid production and cholesterol excretion. To compare receptor activity between each domain and the full-length protein, human FXR cDNA was cloned from a human liver cDNA library. Three human FXR cDNA, designated FXR₂₀, FXR₃₃, and FXR₅₃ cDNA, were subcloned and ligated into a pET28a expression vector. Each protein was expressed in Escherichia coli (BL21) and purified by nickel-nitrilotriacetic acid column chromatography. Approximately 5 mg of FXR₃₃ (1–182 amino acids deleted from FXR, 37 kDa) and 2 mg of FXR₅₃ (the full-length protein of FXR, 59 kDa) was purified from 1 L of Luria-Bertani culture, achieving at least 90% purity. The coactivator recruitment assay for FXR activation was carried out with the three variants of the FXR protein by using dissociation-enhanced lanthanide fluoroimmunoassay-europium-N¹-labeled anti-His antibody. From an optimized assay, a saturated hyperbolic fluorescence signal curve was produced when 250 nM of FXR₃₃ and 100 nM of steroid receptor coactivator-1 peptide, a coactivator of FXR consisting of 26 amino acids, were used with a concentration dependence on chenodeoxycholic acid (from 0 to 200 μM). The ligand-binding domain of FXR (FXR₃₃) was the most suitable protein for studying the activation of FXR with a fluorescence-based assay, because it showed better structural stability than either the full length of FXR (FXR₅₃) or the DNA-binding domain of FXR (FXR₂₀).     

Study on the polymerization of ϵ‐caprolactam in the interlamellar spaces of [TEACOOH]–montmorillonite intercalations complex and its characterization

The polymerization of ?‐caprolactam between the interlamellar spaces of the [TEACOOH]–montmorillonite intercalations complex was attempted using Na–montmorillonite and 10‐carboxy‐n‐decyltriethylammonium bromide to achieve [TEACOOH]–polycaprolactam–montmorillonite, in which montmorillonite (inorganic polymer) is chemically bonded with the polycaprolactam (organic polymer). The results of X‐ray and IR analysis for the samples obtained after polymerization showed that the polymerization reaction has been successfully accomplished. For the purpose of studying the polymeric reaction product more precisely, we have isolated the polymerized product from the silicate layers and analyzed it with X‐ray diffractometer and IR spectrometer. Comparison of the results of X‐ray and IR analysis between the isolated polymer and the polymer that was synthesized by the reaction of ?‐caprolactam only with the organic cation without montmorillonite showed that both obtained polymers are the same compounds. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1904–1910, 2003     

Effect of TiO2 thin film thickness and specific surface area by low-pressure metal–organic chemical vapor deposition on photocatalytic activities

TiO₂ photocatalyst films having an anatase crystal structure with different thickness were prepared by the low-pressure metal–organic chemical vapor deposition (LPMOCVD) to examine the effect of growth conditions on photocatalytic activity. Film thickness was linearly proportional to the deposition time. Structure of the film was strongly dependent on the deposition time. In early stage of deposition, fine particles deposit on the substrate. As increasing the deposition time, crystal orientation is gradually selected following the Kolmogorov model and c-axis oriented columnar crystals become dominant. The photocatalytic activity strongly depends on the film deposition time (or film thickness) in nonlinear way. The optimum thickness of TiO₂ catalyst film grown by LPMOCVD may locate between 3 and 5 μm.