简析计算机网络桌面安全管理系统在企业内网中的实践

目前,众多企业构建了计算机网络管理系统,企业内网在企业发展过程中发挥了巨大的作用,但其中也存在一些安全问题。因此,我们需要应用计算机网络桌面安全管理系统,以保证数据的安全、稳定。通过分析计算机网络桌面安全管理系统在企业内网中的运作情况,提出了一些有价值的参考意见。     

硼酸镁晶须的合成研究

报道了硼酸镁晶须的合成研究结果。硼酸镁晶须是一种性能价格比高的晶须产品，利用熔盐法合成出长10—50μm、直径0．5—2μm的硼酸镁晶须。还就硼酸镁晶须增强复合材料的研究和硼酸镁晶须工业化的前景作了展望。     

Influence of fly ash and its mean particle size on certain engineering properties of cement composite mortars

An experimental investigation on the effects of incorporating large volumes of fly ash on the early engineering properties and long-term strength of masonry mortars is reported. The effect of fly ash and its mean particle size (PD) on the variation of workability and strength has been studied. It was found that fly ash and its mean particle size play a very significant role on the strength of masonry mortars. It has been observed that the early-term strength, except the mortars incorporating coarse fly ash (CFA), was slightly influenced by the replacement with fly ash. The long-term strength (both the bond strength and the compressive strength) will significantly increase, especially for the bond strength of mortars incorporating coarse fly ash. It was also found that the bond strength significantly increased as the mean particle size of fly ash decreases after 28 days curing. However, the 7-day strength was little influenced by fly ash particle size. The fluidity of composite mortar enhanced due to replace cement and lime with fly ash, and the mean PD of fly ash significantly influenced the workability.     

Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation

This paper investigates the ability of a shear wave reflection (WR) method to monitor microstructural changes of Portland cement mortar during hydration. The wave reflection method measures the reflection loss of shear waves at an interface between a steel plate and mortar. Mortars with water/cement ratios of 0.35, 0.5 and 0.6 were tested at isothermal curing conditions of 25 °C. The numerical model HYMOSTRUC3D was used to simulate the evolution of microstructural properties of the cement paste phase of the tested mortars. The parameters obtained from the simulations were the volume fraction of the total and connected solid phase and the specific contact area of the hydrated cement particles. The investigations have shown that the wave reflection measurements are governed primarily by the degree of the inter-particle bonding of the cement particles as calculated from the specific contact area of a simulated microstructure.     

水煤浆添加剂及其研究进展

介绍了水煤浆添加剂结构特征对煤成浆性能影响的研究情况及新型高效添加剂的研究进展。目前制浆添加剂主要分为阴离子表面活性剂和非离子表面活性剂;我国与国外的水煤浆添加剂技术相比,还存在一定的差距,特别是分散降粘性质方面,高效、价廉、适用性广的添加剂为数并不多。     

基于ExtJS+SSH架构的民政服务信息系统设计与实现

针对传统民政办公系统结构复杂,不易维护和不易扩展的情况,提出了一种基于Ext JS+SSH(Struts2、Spring和Hibernate)架构的民政服务信息系统。按照Java EE的分层思想,通过Struts2框架实现了MVC模式,将用户界面、业务处理和数据访问三者分离,利用Spring框架统一管理系统对象以降低系统的耦合性,采用Hibernate框架实现业务数据的持久化以降低开发难度。实验结果表明,基于Ext JS和SSH架构的系统具有易维护、可扩展和运行稳定的特性。     

等离子喷涂羟基磷灰石涂层

羟基磷灰石由于具有优良的生物性能，被广泛应用于生物材料领域，而等离子喷涂制备羟基磷灰石涂层是应用最为广泛的制备方法之一。在综合国内外献的基础上，本从羟基磷灰石的本征性能、喷涂工艺的影响、结合强度和梯度涂层等方面进行综述。     

The SMSI between supported platinum and CeO2–ZrO2–La2O3 mixed oxides in oxidative atmosphere

CeO₂–ZrO₂–La₂O₃ (CZL) mixed oxides were prepared by citric acid sol–gel method. The as-received gel was calcined at 500, 700, 900 and 1050 °C to obtain the so-called C5, C7, C9 and CK, respectively. The C5, C7 and C9 powders were impregnated with H₂PtCl₆ and then calcined at 500 °C to prepare P5C5, P5C7 and P5C9, respectively. The impregnated CK powders were calcined at 500, 700 and 900 °C to prepare P5CK, P7CK and P9CK, respectively. The XRD and XPS analyses show that the surface distribution of Pt is evidently influenced by the structural and textural properties of the support. The CO adsorption followed by FTIR reveals that the dispersion and the chemisorption sites of Pt are reduced as the calcination temperature of CZL support increases. The chemisorption ability of the CK samples is even completely deactivated. The encapsulation mechanism, which has been applied to explain the so-called strong metal–support interaction (SMSI) after reductive treatment, is introduced here to demonstrate the abnormal observations though the samples were prepared in oxidative atmosphere. The HRTEM results also confirm this explanation. The effects of oxygen vacancies, the chemisorption sites on the Pt surface and Pt/Ce interfacial sites on the three-way catalytic activities are discussed.     

Relations between quantum correlations,purity and teleportation fidelity for the two-qubit Heisenberg XYZ system

Quantifying and understanding quantum correlations may give a direct reply for many issues regarding the interesting behaviors of quantum system. To explore the quantum correlations in quantum teleportation, we have used a two-qubit Heisenberg XYZ system with spin–orbit interaction as a quantum channel to teleport an unknown state. By using different measures and standard teleportation protocols, we have derived the analytical expressions for quantum discord, entanglement of formation, purity, and maximal teleportation fidelity of the system. We compare their different characteristics and analyze the relationships between these quantities.     

Multidisciplinary design modeling and optimizationfor satellite with maneuver capability

According to the mission of a satellite with maneuver capability, the collaborative optimization (CO) method was introduced for the satellite system design, and the related multidisciplinary design optimization (MDO) model was established. The possessing and needed velocity increments Δv and Δv _{n e e d} were taken as the measurement of maneuvering capability of the studied satellite, which were then combined with total mass of the satellite to form the optimization objective in the systematic level of the MDO problem. The design variables and constraints of the MDO problem dealt with disciplines or subsystems as guidance, navigation and control (GNC), power, and structure, and corresponding engineering analysis models were also built. A program system to solve the MDO problem wasdeveloped by integrating a non-nested CO method, the commercial and user-supplied codes on framework software iSIGHT. The result showed that the satellite performance could be obviously improved, which also indicates MDO technique is feasible and effective for the spacecraft design problem. The modeling and optimization procedure of the work can be referred for further research and engineering design.