Development of a gel spinning process for high‐strength poly(ethylene oxide) fibers

This article describes a new gel‐spinning process for making high‐strength poly(ethylene oxide) (PEO) fibers. The PEO gel‐spinning process was enabled through an oligomer/polymer blend in place of conventional organic solvents, and the gelation and solvent‐like properties were investigated. A 92/8 wt% poly(ethylene glycol)/PEO gel exhibited a melting temperature around 45°C and was highly stretchable at room temperature. Some salient features of a gel‐spun PEO fiber with a draw ratio of 60 are tensile strength at break = 0.66 ± 0.04 GPa, Young's modulus = 4.3 ± 0.1 GPa, and a toughness corresponding to 117 MJ/m³. These numbers are significantly higher than those previously reported. Wide‐angle x‐ray diffraction of the high‐strength fibers showed good molecular orientation along the fiber direction. The results also demonstrate the potential of further improvement of mechanical properties. POLYM. ENG. SCI., 54:2839–2847, 2014. © 2014 Society of Plastics Engineers     

Design, synthesis and biological evaluation of Trypanosoma brucei trypanothione synthetase inhibitors

Trypanothione synthetase (TryS) is essential for the survival of the protozoan parasite Trypanosoma brucei, which causes human African trypanosomiasis. It is one of only a handful of chemically validated targets for T. brucei in vivo. To identify novel inhibitors of TbTryS we screened our in-house diverse compound library that contains 62,000 compounds. This resulted in the identification of six novel hit series of TbTryS inhibitors. Herein we describe the SAR exploration of these hit series, which gave rise to one common series with potency against the enzyme target. Cellular studies on these inhibitors confirmed on-target activity, and the compounds have proven to be very useful tools for further study of the trypanothione pathway in kinetoplastids.     

Simulated weather variables effects on millet fertilized with phosphate rock in the Sahel

The Sudano–Sahelian agroecological zone is characterized by low and variable rainfall regimes and P deficiency. The present study complements previous research efforts and the objective was (i) to use the Newhall Simulation Model (NSM) to characterize three ICRISAT research sites, and (ii) to use output of NSM to develop an empirical model to guide efficient use of rainfall and fertilizers. The results show that length of the periods that rainfall exceeded evapotranspiration was larger in Bengou than in Gobery and Sadoré. Total positive moisture balance during the three growing seasons was 85.7 mm at Bengou and 19.7 mm at Sadoré. The model explained 52% of the variability in millet yields based on curvilinear response to P fertilizer, standardized May–June (R_mj) rainfall, and the number of wet days in the year (BW₃). Yields appear more sensitive to BW₃ than to R_mj. Their respective elasticity coefficients (E _c ) were 0.62 and 0.09. Assessment of the model using R²=0.76 and the D-index = 0.85 showed reasonable agreement between model estimation and actual field yields. The study demonstrates the application of simulation models as a cost-effective means in terms of time and funds to agronomic research.     

Circulating Tumor Cells (CTC) and Cell-Free DNA (cfDNA) Workshop 2016: Scientific Opportunities and Logistics for Cancer Clinical Trial Incorporation

Despite the identification of circulating tumor cells (CTCs) and cell-free DNA (cfDNA) as potential blood-based biomarkers capable of providing prognostic and predictive information in cancer, they have not been incorporated into routine clinical practice. This resistance is due in part to technological limitations hampering CTC and cfDNA analysis, as well as a limited understanding of precisely how to interpret emergent biomarkers across various disease stages and tumor types. In recognition of these challenges, a group of researchers and clinicians focused on blood-based biomarker development met at the Canadian Cancer Trials Group (CCTG) Spring Meeting in Toronto, Canada on 29 April 2016 for a workshop discussing novel CTC/cfDNA technologies, interpretation of data obtained from CTCs versus cfDNA, challenges regarding disease evolution and heterogeneity, and logistical considerations for incorporation of CTCs/cfDNA into clinical trials, and ultimately into routine clinical use. The objectives of this workshop included discussion of the current barriers to clinical implementation and recent progress made in the field, as well as fueling meaningful collaborations and partnerships between researchers and clinicians. We anticipate that the considerations highlighted at this workshop will lead to advances in both basic and translational research and will ultimately impact patient management strategies and patient outcomes.     

Identification of Sulfur‐Containing Impurities in Biodiesel Produced From Brown Grease

Fatty acid methyl esters (FAME) from waste grease usually contain higher concentrations of sulfur (S) than allowed to meet the specified quality standard for biodiesel (<15 ppm). Brown grease lipid‐derived FAME was produced and fractionated by two passes through a wiped‐film evaporator (WFE) to produce three fractions: (1) a 120 °C pass distillate, (2) a 170 °C pass distillate, and (3) a heavy residue. Solid phase extraction (SPE) was used to concentrate the S species from the distillate fractions so that they could be detected by a gas chromatography–pulsed flame photometric detector (GC–PFPD) and GC–mass spectrometry (MS). The ethyl acetate and methanol (MeOH) fractions obtained by SPE of the 120 °C WFE distillate and methyl tert‐butyl ether and acetone fractions obtained by SPE of the 170 °C WFE distillate had the highest concentration of S and were, therefore, the best candidates for GC–PFPD analysis. GC–PFPD methods were developed to separate the S species adequately enough for those peaks to be analyzed by GC–MS which matched fragmentation patterns identified by the MS chemical library as tetrahydrothiophenes, dithiolanes, and thiophenes. MS fragmentation patterns were used to identify other, larger, S‐bearing species as sulfides and disulfides cross‐linking between two FAME molecules. The results obtained from this study provide a foundation for developing effective purification methods to remove S‐containing impurities from waste grease‐derived biodiesel.     

Modification of absorbent poly(glycerol‐glutaric acid) films by the addition of monoglycerides

Monoglycerides (MGs) have been incorporated into the matrix of poly(glycerol‐co‐glutaric acid) films to investigate their effect on the thermal, mechanical, and solvent absorption properties of the resultant films. Solvent absorption studies revealed that poly(glycerol‐co‐glutaric acid‐co‐MG) films were able to absorb and resorb solvents better than poly(glycerol‐co‐glutaric acid) films, albeit they had higher erosion levels. Thermogravimetric analysis showed that the incorporated MGs did not affect the thermal stability of the glycerol‐based films. The MG‐incorporated films were observed to be much softer than the poly(glycerol‐co‐glycerol) films which was further proven by a 39‐fold reduction in Young's Modulus and 17‐fold reduction in fracture energy when compared to the poly(glycerol‐co‐glycerol). Mechanical property studies also revealed that the incorporation of MGs increased the elongation % and reduced the tensile strength of poly(glycerol‐co‐glutaric acid) films. Correlation analysis revealed a strong linear relationship between Young's Modulus and fracture energy (R² = 0.9962), and between Young's Modulus and tensile strength (R² = 0.9972). Our study proved that MGs can be successfully incorporated in the polymer matrix of poly(glycerol‐co‐glutaric acid) films to produce softer films with increased elongation and increased solvent absorption capacity. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45381.     

Characterization of a dimer preparation method for nanoscale organic aerosol

Nanoscale dimers have application in studies of aerosol physicochemical properties such as aerosol viscosity. These particle dimers can be synthesized using the dual tandem differential mobility analyzer (DTDMA) technique, wherein oppositely charged particle streams coagulate to form dimers that can be isolated using electrostatic filtration. Although some characterization of the technique has been published, a detailed thesis on the modes and theory of operation has remained outside the scope of prior work. Here, we present new experimental data characterizing the output DTDMA size distribution and the physical processes underlying its apparent modes. Key experimental limitations for both general applications and for viscosity measurements are identified and quantified in six distinct types of DTDMA experiments. The primary consideration is the production of an adequate number of dimers, which typically requires high mobility-selected number concentration in the range 25,000–100,000?cm^?3. The requisite concentration threshold depends upon the rate of spontaneous monomer decharging, which arises predominately from interactions of the aerosol with ionizing radiation within the coagulation chamber and is instrument location dependent. Lead shielding of the coagulation chamber reduced the first-order decharging constant from ～2.0?×?10^?5 s^?1 to ～0.8?×?10^?5 s^?1 in our laboratory. Dimer production at monomer diameters less than 40?nm is hindered by low bipolar charging efficiency. Results from the characterization experiments shed light on design considerations for general applications and for characterization of viscous aerosol phase transitions.

Copyright © 2019 American Association for Aerosol Research     

Total content and dialyzable iron and zinc in foods from northern and Southern Mexico

Developing countries diets are based on a variety of plant foods that often are the main suppliers of important amounts of iron (Fe) and zinc (Zn). The objectives of this study were 1) to measure the total and dialyzable amounts of Fe and Zn in foods from Northern Mexico (Sonora) and from Southern Mexico (Oaxaca) and 2) to evaluate the effect of meat content of diets on the dialyzable amount of Fe and Zn. Methods to calculate the total dialyzable amount of Fe and Zn, were those of the AOAC and of Shen et al. Total Fe in e northern Mexican foods went from 0.78 +/- 0.0 to 11.59 +/- to 0.03 mg/ 100g (dry weight, DW); in southern Mexican foods the same micronutrient amounts were 0.86 +/- 0.18 to 8.8 +/- 0.57 mg/100 g (BS). Total Zn values were 0.91 +/- 0.00 to 13.58 +/- 0.05 mg/100 g (DW) in Sonora, and 0.64 +/- 0.18 to 20.80 +/- 0.33 mg/100 g (DW) in Oaxaca. In northern Mexico, foods dialyzable Fe had values from 0.1 +/- 0.04% to 10.6 +/- 0.36% and for Zn from 4.0 +/- 0.21% to 55.32 +/- 0.14%. Meanwhile, the range of values of dialyzable Fe for foods from Oaxaca were from 0.22 +/- 0.06% to 9.40 +/- 0.14% for and from 2.41 +/- 0.26% to 54.27 +/- 1.49% for dialyzable Zn. The average value for dialyzable Fe was higher in the foods that contained meat or meat products (p= 0.001).     

Synthesis and Evaluation of 1‐(1‐(Benzo[b]thiophen‐2‐yl)cyclohexyl)piperidine (BTCP) Analogues as Inhibitors of Trypanothione Reductase

Thirty two analogues of phencyclidine were synthesised and tested as inhibitors of trypanothione reductase (TryR), a potential drug target in trypanosome and leishmania parasites. The lead compound BTCP ( 1 , 1‐(1‐benzo[b]thiophen‐2‐yl‐cyclohexyl) piperidine) was found to be a competitive inhibitor of the enzyme (K_i=1 μM ) and biologically active against bloodstream T. brucei (EC₅₀=10 μM ), but with poor selectivity against mammalian MRC5 cells (EC₅₀=29 μM ). Analogues with improved enzymatic and biological activity were obtained. The structure–activity relationships of this novel series are discussed.     

Optimization of the in Situ Transesterification of Grain Sorghum (Milo) DDGS to Fatty Acid Methyl Esters and Fatty Acid Ethyl Esters

Distillers grains and solubles generated from the ethanol fermentation of grains contain acylglycerols (AG) that can be successfully converted to fatty acid methyl esters (FAME) and fatty acid ethyl esters (FAEE), commonly known as biodiesel. However, when grain sorghum (milo) DDGS were used as a feedstock for in situ transesterification (IST) under the previously established optimal conditions for other AG-bearing substrates, the yield plateaued at only 32.2% (corrected in this study to 24.2%). Several IST studies have reported significantly higher conversions of AG-bearing substrates to FAME. Therefore, the goal of this IST study was to improve the conversion of the AG in milo DDGS to FAME and FAEE by varying the temperature of reaction, the concentrations of the base (sodium methylate, NaOMe), volume of methanol and ethanol, and the amount of moisture in DDGS. Methyl tert-butyl ester was also evaluated as a co-solvent intended to improve miscibility and reaction rate. Among these variables, the most effective change was an increase in temperature from 40 to 65 °C. The most successful reaction used a AG:NaOMe:MeOH molar ratio of 1.0:2.6:168.9. Those reaction conditions used 4.8 mmol NaOMe dissolved in 12.6 mL MeOH and resulted in a 79.8% conversion of AG to FAME.