Effects of soil moisture and water depth on ERS SAR backscatter measurements from an Alaskan wetland complex

We conducted a preliminary investigation of the response of ERS C-band SAR backscatter to variations in soil moisture and surface inundation in wetlands of interior Alaska. Data were collected from 5 wetlands over a three-week period in 2007. Results showed a positive correlation between backscatter and soil moisture in sites dominated by herbaceous vegetation cover (r = 0.74, p < 0.04). ERS SAR backscatter was negatively correlated to water depth in all open (non-forested) wetlands when water table levels were more than 6 cm above the wetland surface (r = − 0.82, p < 0.001). There was no relationship between backscatter and soil moisture in the forested (black spruce-dominated) wetland site. Our preliminary results show that ERS SAR data can be used to monitor variations in hydrologic conditions in high northern latitude wetlands (including peatlands), particularly sites with sparse tree cover.     

Structure and evolutionary implications of a "cysteine-rich" Campoletis sonorensis polydnavirus gene family

For successful parasitization, the female Campoletis sonorensis endoparasitic wasp injects a polydnavirus into its host, Heliothis virescens, during oviposition. Viral gene expression induces immunosuppression and alters development of the host. We report here that three abundantly expressed genes, VHv1.1, WHv1.0, and WHv1.6, describes a polydnavirus "cysteine-rich" gene family which may be important in inducing these host manifestations. These genes have a similar primary gene structure and their proteins contain cysteine motifs characteristic of snail ion-channel ligands, the omega-conotoxins. Like the omega-conotoxins, the intercysteine amino acid residues are hypervariable with only three identical amino acids in all motifs. The conservation of this domain in the three viral genes may reflect an important functional role for these viral proteins in the parasitization of H. virescens. The three genes also contain introns similar in sequence at comparable positions in their 5' untranslated leaders and coding sequences. VHv1.1 contains two cysteine motifs, and each motif is interrupted by an intron at the same position as in the cysteine motifs of WHv1.0 and WHv1.6. Intron 2 sequences of WHv1.0 and WHv1.6 are 92% identical, while the immediately flanking exon sequences encoding the cysteine motifs are only 76% identical. This provides an example of nuclear pre-mRNA introns which are more conserved than flanking exons among members of a gene family.     

Comparison of technetium-99m-ECD to Xenon-133 SPECT in normal controls and in patients with mild to moderate regional cerebral blood flow abnormalities

Technetium-99m-1,1-ethyl cysteinate dimer (ECD) has been proposed as a "chemical microsphere" for SPECT measurement of regional cerebral blood flow (rCBF). However, its distribution has not yet been compared in humans to an established rCBF measure. Therefore, we compared the uptake and distribution of ECD with rCBF measured by 133Xe SPECT in subjects with mild to moderate flow abnormalities and in normal volunteers. Blood and urine chemistries and vital signs were unchanged from pre-ECD values up to seven days postinjection. Profile plots demonstrated pattern agreement between rCBF ratios (133Xe) and ECD count density ratios. A significant correlation of rCBF ratios to ECD count density ratios was observed (r = 0.77), with a slope of 0.64 and intercept of 0.36. To explore whether or not the relationship between rCBF and ECD was dependent on absolute flow, ECD region of interest data were expressed in units of ml/min/100 g by equating global CBF (133Xe) and ECD global count density. A closer correlation (r = 0.88) was found for these data than for the count ratio data. The slope was closer to one (m = 0.83) and the intercept was closer to zero (b = 8.2). Also, a significant correlation was observed between ECD-derived rCBF and 133Xe rCBF in the lesion area (r = 0.92) for patients with well-demarcated rCBF lesions. The slope (0.80) suggested a slight underestimation of lesion flow by ECD. Finally, ECD clearance from cortical gray matter ROIs derived from high-resolution scans from 1 to 4 hr postinjection was slow (2.4%/hr). In summary, ECD is a safe and effective marker of regional cerebral perfusion. The distribution of ECD is linearly related to rCBF measured by 133Xe SPECT, although our data suggest a mild underestimation of flow at the high end of the normal range.     

The use of foreign patenting as an internationally comparable science and technology output indicator

Foreign patenting activity in some of the world major patent systems is being compared between countries and industries and is found to be, with a few notable exceptions, relatively unbiased. Furthermore, a brief dynamic analysis of the foreign patenting activity in the USA of a number of OECD-countries in 41 industrial sectors in terms of ‘Revealed Technological Advantage’ indices suggests that foreign patent data might provide a very useful addition to the arsenal of Science and Technology Output Indicators.     

Rubber-assisted embossing of polymer thin films using molds with through-thickness microchannels

A flexible microfluidic chip is difficult to fabricate using the standard hot embossing technology. In this study, rubber-assisted embossing of polymer thin films using molds with through-thickness microchannels was investigated. The polymer film was thermoformed into the microchannels by rubber as a soft counter-tool. Different processing conditions, as well as material selections, affecting the thickness uniformity and replicated depth were examined. Results indicated that smoother surfaces on the embossed articles were created, and the thickness uniformity and the depth of the embossed channel were significantly affected by the embossing temperature, the embossing pressure, and the rubber hardness. The embossed film was sealed on one side with a layer of transparent adhesive film to form closed microchannels, and desired 3-D flow characteristics were obtained with this flexible microfluidic chip.     

Use ofLeucaena leucocephala (Lam. de Wit) leaves as a nitrogen source for crop production

Field and pot trials were conducted to determine optimum management practices for usingLeucaena leucocephala (Lam. de Wit) leaves as a N source for crop production. Field trials with maize showed no benefit from split application of leucaena leaves or from application of fresh as opposed to dried material. Field trials also failed to show any difference between incorporation as opposed to surface application of leucaena leaves. This may be attributed to the low nitrogen response observed. Pot trials however, showed that soil incorporation of leucaena leaves was more effective than surface application in increasing plant dry weight.Leucaena leaves were not as effective as inorganic N in increasing maize grain yield (field trials) or dry matter production (pot trial). Unlike inorganic N, leucaena leaves had a significant residual effect on the succeeding maize crop. In decomposition studies, buried leucaena leaves decomposed more quickly than surface-applied leaves, and fresh leaves decomposed more rapidly than dried leaves.     

Quantification and source characterization of volatile organic compounds from exercising and application of chlorine-based cleaning products in a university athletic center

Humans spend approximately 90% of their time indoors, impacting their own air quality through occupancy and activities. Human VOC emissions indoors from exercise are still relatively uncertain, and questions remain about emissions from chlorine-based cleaners. To investigate these and other issues, the ATHLETic center study of Indoor Chemistry (ATHLETIC) campaign was conducted in the weight room of the Dal Ward Athletic Center at the University of Colorado Boulder. Using a Vocus Proton-Transfer-Reaction Time-of-Flight Mass Spectrometer (Vocus PTR-TOF), an Aerodyne Gas Chromatograph (GC), an Iodide-Chemical Ionization Time-of-Flight Mass Spectrometer (I-CIMS), and Picarro cavity ringdown spectrometers, we alternated measurements between the weight room and supply air, allowing for determination of VOC, NH₃, H₂O, and CO₂ emission rates per person (emission factors). Human-derived emission factors were higher than previous studies of measuring indoor air quality in rooms with individuals at rest and correlated with increased CO₂ emission factors. Emission factors from personal care products (PCPs) were consistent with previous studies and typically decreased throughout the day. In addition, N-chloraldimines were observed in the gas phase after the exercise equipment was cleaned with a dichlor solution. The chloraldimines likely originated from reactions of free amino acids with HOCl on gym surfaces.     

Forest recreation planning in Langkawi Island,Malaysia, using Landsat TM

There is an increasing demand for development of new recreation areas and more intensive management of existing areas. With an eye to the design and implementation of comprehensive zoning plans, satellite remote sensing should provide an ideal tool for terrain analysis, vegetation, and cover type mapping, which are vital to intensive recreation planning. The study undertaken was aimed at examining the applicability of satellite remote sensing for providing necessary information to be used in forest recreation planning. A Landsat TM scene (path row 128/ 56) taken on 30 January 1992 was processed digitally on a Meridian PC image processing system by selecting a representative subsection of the scene that covered the study area. Existing land use, topographical maps, and other related ground information as well as contrast stretching and a maximum likelihood classifier ( MLC) technique were used to assist in the classification. The selection of potential recreation sites was based from potential surface analysis ( PSA ). The results showed that most of the undeveloped forest area located in the north-eastern part of Langkawi Island, Malaysia, was the most potential sites for recreational development, while the moderate recreation potential zones lay on the western part of the island. The mean overall classification accuracy obtained was 82% Therefore the study implies that it is possible to select potential recreation sites ranging from most potential to least potential in Langkawi Island using Landsat TM.     

Self Assembly–Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy–Amine Thermosets

The use of self‐assembling, pre‐polymer materials in 3D printing is rare, due to difficulties of facilitating printing with low molecular weight species and preserving their reactivity and/or functions on the macroscale. Akin to 3D printing of small molecules, examples of extrusion‐based printing of pre‐polymer thermosets are uncommon, arising from their limited rheological tuneability and slow reactions kinetics. The direct ink write (DIW) 3D printing of a two‐part resin, Epon 828 and Jeffamine D230, using a self‐assembly approach is reported. Through the addition of self‐assembling, ureidopyrimidinone‐modified Jeffamine D230 and nanoclay filler, suitable viscoelastic properties are obtained, enabling 3D printing of the epoxy–amine pre‐polymer resin. A significant increase in viscosity is observed, with an infinite shear rate viscosity of approximately two orders of magnitude higher than control resins, in addition to, an increase in yield strength and thixotropic behavior. Printing of simple geometries is demonstrated with parts showing excellent interlayer adhesion, unachievable using control resins.