Economic cost modeling of environmental-stress-screening andburn-in

The electronics industry is highly competitive. The introduction of new advanced integrated circuits continues. The manufacturer must develop a product with adequate life cycle, high quality and low failure rate in the specified time period. Environmental stress screening (ESS) is widely used in the electronics industry to assist in eliminating early or patent failures. The bathtub curve is a common model for the failure rate of a population. The classic bathtub curve has three parts: infant mortality; useful life; and wearout. However, some electronic products have latent defects which are not detected by conventional inspection or functional testing, and occur during the product useful life. Most electronic systems have finite useful life. As a result, technology obsolescence is of concern and should be considered, This paper uses a new interpretation and development of the bathtub curve that integrates: (1) latent failures; and (2) the concept of obsolescence, by constructing an integrated cost model used to determine both optimal burn-in and ESS times in the same environment     

Kinetics of two-step anionic polymerization

This article deals with the kinetics of two-step anionic polymerization by way of a non-steady state method. Several molecular parameters can be evaluated using the formulae developed. A bimodal molecular weight distribution function for the resulting polymer is derived from the set of kinetic differential equations, which is in agreement with the experimental data reported.     

心电地图仪中工频干扰的一种滤除方法

在心电地图仪中记录到的体表心电信号往往由于电磁的影响而引进工频干扰．基于体表心电信号中工频干扰的特点，作者提出了一种滤除工频干扰的方法，即就单独—胸导联信号通过提高频谱的分辨率来估计工频干扰的频率；基于最小均方误差准则来估计各导联信号中工频干扰的幅度和相位。文中还给出了该算法的流程图和滤波性能分析。模拟结果表明了该算法的有效性。应用该算法对心电地图仪中的工频干扰进行对消，取得了满意的结果。     

应用粒子动态分析仪研究水力旋流器流场

利用粒子动态分析仪(PDA),对水力旋流器内固相颗粒流场做了全面的测定,得出水力旋流器内固相颗粒的流态、浓度及粒度分布,为进一步查清水力旋流器的工作机理提供了重要理论依据。     

利用视电阻率饱和度法分析稠油油藏动用状况

为了弄清稠油油藏蒸汽吞吐井附近油层的动用状况．利用侧钻井视电阻率饱和度分析法，研究电阻减小率与含油饱和度的关系．以确定蒸汽吞吐井附近油层的动用状况。实践证明，该方法切实可行，为调油油田蒸汽吞吐阶段油层动用程度研究，提供了一条新途径。     

用于提高国产氩离子激光器相干长度的相干扩展器

本文报导了最近研制成功的用于提高国产氩离子激光器相干长度的相干扩展器。利用这种基于F-P理论的相干扩展器可以使国产氩离子激光器的相干长度由不足5cm一下提高到m的量级,功率损耗在25%～40%之间,有着很好的应用前景。     

面向表面微加工工艺的微器件设计框架的研究

本文以微器件设计为对象，对微硅表面制造驱动的微器件并行设计方法学及相应的计算机辅助设计工具的开发逻辑进行了研究，提出了采用基于三层Web-ASP集成框架实现e-CAD原型工具的编程方案，其中，并行任务流管理与控制，微器件实例及设计资源库，微加工工艺规划及仿真，微器件设计评价等是该系统实现的关键要素，在此基础上将建立网上微器件设计中心，并通过应用服务机制，实现对微器件设计工具使用的商务化，以达到降低设计成本，加快MEMS产业化之目的。     

甲醇氧化羰化制碳酸二甲酯产物气相色谱分析

以Chromosorb 10 1为固定相 ,气相色谱法分析甲醇氧化羰化制碳酸二甲酯产物中水、甲醇、乙酸甲酯和碳酸二甲酯等组份的含量 ,考察了柱温 ,载气流量对分离度的影响 ,确定了适宜的分析条件 ,并用校正面积归一化法定量。该方法操作简便 ,快速 ,精度高 ,重现性好