Interactions between Cytochrome c and DNA Strands Self-Assembled at Gold Electrode

In this work, we reported the investigation on the interaction between DNA strands self-assembled at gold electrodes and an electron transfer protein, cytochrome c. We observed that cytochrome c exhibited well-defined electrochemistry in both double-stranded and single-stranded DNA films. This suggested that the electron transfer reaction of cytochrome c arose possibly due to the electron hopping along DNA strands rather than wiring along the double helix. We also compared the heterogeneous electron transfer rate of cytochrome c with that of a ruthenium complex, which further confirmed this mechanism.     

重组铜绿假单胞菌外毒素A工程菌发酵及表达产物的纯化

目的建立稳定、高效表达重组铜绿假单胞菌外毒素A(rEPA)的工程菌发酵及表达产物纯化工艺。方法规模化发酵表达rEPA的重组大肠杆菌rPE553D,离心收集菌体,渗透压调解使菌体周质间隙蛋白释放后,高速离心收集蛋白溶液。经DEAESepharoseFF、PhenylSepharose6FF疏水层析和SOURCE30Q强离子交换层析,超滤浓缩纯化rEPA。用HPLC、SDS-PAGE和Westernblot等方法检定生化和免疫学特性,并用小鼠和Vero细胞检定毒性。结果每55L培养基中rEPA产量超过4g,纯度在95%以上,细胞毒性降低了至少32000倍。其余各项指标均符合《中国生物制品规程》要求。结论已建立了收率高、纯度好、稳定、适合规模化生产rEPA的工艺。     

Phase Behavior and Mechanical Properties of Siloxane-Urethane Copolymer

Two series of siloxane-urethane copolymers were prepared from polydimethylsiloxane (PDMS) with a molecular weight of 1000 or 1800 which was used as a soft segment, 4,4′-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (1,4-BD). Differential scanning calorimetry (DSC) demonstrated that the position (T_gs) and breadth (ΔB) of soft-segment glass transition of copolymers remained constant as the hard-segment content increased. Heat capacities at soft-segment glass transition of the copolymer (ΔCp) were 0.195∼0.411 J/g^○C and heat capacities of pure PDMS (ΔCp₀) were 0.571∼0.647 J/g^○C, leading to the various ΔCp/ΔCp₀ ratios. The ΔCp/ΔCp₀ ratios decreased as the increasing of hard-segment content, showing poor phase separation. The FTIR spectrum confirmed the occurrence of hydrogen bonding in ether end-group of pure PDMS. The ether group of the soft segment led to interfacial mixing between soft and hard segments. The tan δ of the soft segment determined by dynamic mechanical testing (DMA) also identified the mixing of soft and hard segments. The mechanical properties of the copolymer were directly related to either the soft and hard segment contents or the chain lengths of soft and hard segments. The hard segment that reinforced the soft segment and interfacial thickness between soft and hard segment dominated the mechanical properties.     

纳米二氧化钛在防晒化妆品中的应用

从纳米二氧化钛的防晒机理出发,叙述了纳米二氧化钛优越的防晒性能及应用前景,分析了纳米二氧化钛在应用于防晒化妆品时应注意的问题,较为全面地反映出纳米二氧化钛在防晒化妆品中的应用研究情况。     

《计算机组装与办公设备维护》课程改革探讨

《计算机组装与办公设备维护》是高职院校计算机应用技术专业一门实践性很强的核心课程,随着办公自动化的普及．不少用人单位对计算机与各种办公设备实操能力的要求越来越高,所以熟练操作、维护计算机和办公设备,提高实践操作技能．是培养学生的目标。从实际教学出发,探讨课程教学过程中存在的问题和难点,结合人才培养方案、课程目标、学生和课程特点,提出讲练结合等多种改革方法,以达到更好的教学效果。     

Preparation and characterization of high-surface-area titanium dioxide by sol-gel process

One of the important ways to improve photocatalytic efficiency is to prepare catalyst with enhanced surface area. In this work, titanium dioxide (TiO₂) nanoparticles having enhanced surface area were synthesized under the interference of SiO₂. The mixed oxide, SiO₂-TiO₂ (10% mol% Si), was prepared by a sol-gel procedure using titanium tetra-n-butoxide as Ti-precursor. The commercial SiO₂ nanoparticles were added into the TiO₂ sols after hydrolysis. After condensation and calcination heat treatment, the SiO₂-TiO₂ nanoparticles were obtained. To achieve the purpose of obtaining the high-surface-area TiO₂, the SiO₂ was removed subsequently by aqueous NaOH solution. The TiO₂ products were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), electron spectroscopy for chemical analysis (ESCA), and by N₂ adsorption-desorption isotherm. A fine mesoporous structure was formed for as-prepared TiO₂ after calcination at 400^∘C and the average pore diameter was about 7 nm. The porous TiO₂ products possess mixing phases of anatase and rutile. Phase transformation from anatase to rutile occurred when the samples were calcined. The phase transition temperature is sensitive to the silicon content. The particle size of ∼43 nm remained constant upon calcinations from 500 to 700^∘C. The specific surface area was increased up to 66% compared to regular TiO₂ samples that were prepared by the similar sol-gel procedure. The porous TiO₂ nanostructures exhibited enhanced photocatalytic performance to decompose methylene blue under UV irradiation.     

Redox Properties and Catalytic Behavior of Praseodymium-Modified (Ce-Zr)O2 Solid Solutions in Three-Way Catalysts

The three-way catalyst promoters (Ce-Zr)O₂, (Pr-Ce-Zr)O₂ and (Pr-Zr)O₂ were prepared by the sol-gel method. The reduction/oxidation behavior of these mixed oxides was compared. It is shown that the formation of (Pr-Zr)O₂ cubic solid solution at high temperature up to 800 °C makes it more reducible, and that the ternary solid solution that formed in (Pr-Ce-Zr)O₂ mixed oxides plays an important role in the reduction process. The catalytic performance tests reveal that the introduction of a small amount of praseodymium into (Ce-Zr)O₂ favors the light-off temperature of C₃H₆ and NO and the effectiveness for NO conversion at the lean region.     

Influence of epoxy resin on the morphological and rheological properties of PBT/ABS blends compatibilized by ASMA

Polybutylene terephthalate (PBT)/acrylonitrile–butadiene–styrene (ABS) copolymer blends compatibilized by a mixture of styrene–acrylonitrile–maleic anhydride (ASMA) copolymers and epoxy resin (EP) were prepared through melt reactive extrusion. The morphological, rheological, and mechanical properties of these blends were studied. The epoxy functional groups of EP can react with anhydride groups of ASMA and the PBT terminal groups (? OH and ? COOH) simultaneously, leading to the formation of ASMA–EP–PBT graft copolymers. Because of the effective compatibilization of these copolymers at the interface, finer dispersed phase morphologies were obtained. Compared with PBT/ABS/ASMA blends, the addition of EP induced a more stable molten phase structure, with increases of storage moduli, loss moduli, and dynamic viscosities. Results indicated that 1.5 wt% of the EP in the blends was most suited for the compatibilization. Impact properties of these blends were also investigated. POLYM. ENG. SCI., 47:1943–1950, 2007. © 2007 Society of Plastics Engineers     

Fabrication of high surface area graphitic nanoflakes on carbon nanotubes templates

Graphitic nanoflakes were fabricated on the carbon nanotubes templates for increasing the surface area utilizing bias assisted microwave plasma enhanced chemical vapor deposition (MWPECVD). The analysis of morphologies and structures were achieved by means of scanning electron microscopy and transmission electron microscopy. The surface area of graphitic nanoflakes, carbon nanotubes (CNTs) and graphitic nanoflakes/CNTs were 57.44 m²/g, 90.31 m²/g and 130.96 m²/g from BET measurement, respectively. The cyclic voltammetry was used to calculate the active area of platinum catalysts in 1 M sulfuric acid from hydrogen adsorption peak. An enhancement of activity could be observed from the calculation of CV results. This may be attributed to the small particle size and high dispersion of platinum particles coated on graphitic nanoflakes/CNTs. These high surface area materials could be used as catalysts supports or electrode for fuel cell applications.     

Rapid pyrolysis of brown coal and oil shale

A brown coal, peat and oil shale were subjected to a rapid pyrolysis process and medium-heat-value gases together with tar were collected. The char residue was of high activity and suitable for gasification to create a two-stage gasification system. The coal-tar is used for manufacturing liquid fuels and chemicals.