三峡工程建设中若干重大技术问题的突破

三峡工程规模巨大，技术复杂。文章介绍了三峡工程建设在大江截流和混凝土防渗墙施工技术、大坝混凝土快速施工新技术、船闸高边坡施工技术、电站大型钢衬钢筋混凝土压力管道和蜗壳保温保压技术、沥青混凝土心墙、船闸金属结构、水轮发电机组等重大技术问题上的突破。     

业务流程重组在热送热装生产组织中的应用

针对某冶金企业在热送热装生产组织过程中存在的问题，提出了利用业务流程重组的方法对企业的生产业务流程进行改造，规划了新的业务流程，并对其实施后的预期效果进行了分析，实际应用和理论分析表明，通过业务流程重组该企业可大大提高连铸坯的热送热装率和板坯的热装温度。     

气相色谱法测定新鲜茶叶中有机氯农药残留量

对新鲜茶树叶中六六六和滴滴涕共八种异构体的残留量进行测定,与同地点成品茶叶农药残留量相比较基本无差异。本法检测限为>1.8ng/g,回收率为78.2％-99.0％,相对标准偏差<10.0％。     

氧化铝生产管道结疤密度测量方案的讨论

从理论上分析氧化铝生产过程中管道结疤对密度测量的影响，提出利用补偿技术解决结疤对密度测量影响的方案。     

Signal processing using cellular neural networks

The cellular neural network (CNN) architecture combines the best features from traditional fully-connected analog neural networks and digital cellular automata. The network can rapidly process continuous-valued (gray-scale) input signals (such as images) and perform many computation functions which traditionally were implemented in digital form. Here, we briefly introduce the the theory of CNN circuits, provide some examples of CNN applications to image processing, and discuss work toward a CNN implementation in custom CMOS VLSI. The role of analog computer-aided design (CAD) will be briefly presented as it relates to analog neural network implementation.This work is supported in part by the Office of Naval Research under Contract N00014-89-J1402, and the National Science Foundation under grant MIP-8912639.     

鱼雷罐喷粉预处理过程水模研究

在鱼罐喷粉预处理水模实验数据的基础上，进一步利用线性回归确定各工艺操作参数对喷吹基本参数（均混时间、粉剂穿透比和粉剂停留时间）的影响，得出各传输动力学基本参数的函数关系式。     

Energy efficiency, carbon emissions and economic development in Venezuela

Venezuela's vast natural resource base has largely shaped the nation's economic and energy-use patterns. Major opportunities exist for improving the efficiency of energy use in Venezuela and, consequently, restraining the growth of energy-related carbon emissions. This paper presents a detailed report of one potential development path for Venezuela and estimates the ensuing levels of energy demand and CO₂ emissions associated with pursuing this path through the year 2025. The results indicate that by adopting a development strategy that incorporates structural changes in the economy, fuel-switching measures and improved end-use efficiencies, Venezuela can introduce energy efficiency and carbon restraints as part of its economic development process.     

Fault tolerance in FFT arrays: Time redundancy approaches

Fault tolerance in VLSI/WSI FFT arrays acquires relevance when defects and run-time faults become significant, due to large dimensions of processors and arrays. Then, both restructuring to overcome end-of-production defects and reconfiguration to overcome run-time faults are required, to achieve the dual purposes of higher yield and higher reliability.Adopting as basic FFT network the two-dimensions array that directly corresponds to the FFT flow graph, the usual structure redundancy techniques tailored for two-dimensions arrays reconfiguration are not well applicable, since the limited locality of this network leads to relevant area increase due to the augmented interconnection structure.In this paper,time redundancy is suggested as a viable alternative for the two-dimensions FFT array; two different solutions are presented, one based oninter-stage reconfiguration, the other one adoptingintra-state reconfiguration, both allowing for survival to multiple faults with limited increase of network complexity and very small hard-core sections. As usual in many time redundancy methods, both approaches result in a processing speed equal to half the processing speed granted by an ideal, fault-free device.Reliability and survival ratios to multiple faults are evaluated for the two cases, taking into account also the area increments necessary for fault tolerance. The reliability evaluations allow for a direct comparison of the two solutions.     

以杂多酸为催化剂合成乙二醇-乙醚的研究

研究了杂多酸催化无水乙醇和环氧乙烷(EO)制备乙醇乙醚的醚化反应,考察了不同种类的杂多酸以及醚化反应工艺条件对反应活性和选择性的影响.结果表明,PW_(12)催化剂的反应活性高、反应温度低、选择性好,当用PW_(12)作催化剂,乙醇与环氧化乙烷之比为3.0(mol),反应温度45℃,反应时间1h时,转化率和选择性均超过97%.     

含两种不同共聚组分改性聚酯的结晶速率

添加己二酸、间苯二甲酸,聚乙二醇对PET进行改性,合成样品。用DSC法研究合成共聚物的等温结晶动力学。结果表明,在所选择的温度范围内,共聚物很好的符合Avrami方程。随温度的升高,共聚物的结晶速度常数K和Avrami指数n逐渐减小,结晶速度G逐渐降低。含2种柔性组分的共聚酯随着一种柔性组分含量的增加,结晶速率G上升;含一种刚性一种柔性组分的共聚酯随刚性组分含量的增加,结晶速率G下降。