一种铁氧体移相驱动器专用集成电路

介绍了ＳＡ０１８铁氧体移相驱动器专用集成电路的工作原理，电路设计和实验结果。该电路的内部电路设计有双路激励驱动器，放大器，积分器和双路高速比较器等功能单元。将铁氧体移相器的激励驱动器和相位控制器融于一体，大大减少了铁氧体移相器的外围设计。     

热分层流动计算中若干差分格式的比较

本文应用常规的守恒方程及湍流模型，对二维池内热分层流动建立了数学模型，并在Ｐａｔａｎｋａｒ的压力校正法基础上对该数学模型进行了数值计算，计算中的差分格式为乘方格式、一阶迎风、二阶迎风和ＱＵＩＣＫ。通过与实验的比较分析，建议计算应采用ＱＵＩＣＫ格式，并在进行风格独立性试验的基础上使用加密网络。     

榆树林油田砂岩储层敏感性研究

榆树林油田储层粘土矿物含量较高，各种注入条件和施工条件都会对该储层造成相应的伤害，应采取相应的防护措施，为防止速敏的发生，储层的注水速度应控制在临界流速（1.0mL/min）以下，在油井转注时，可先注入1.09PV的含粘土稳定剂的进行处理，以提高产量或注入量，注入阴离子表面活性剂配置的活性水再注入地层水，不能增加地层水的渗透率，该项试验研究对指导榆树林油田的开发具有重要的意义。     

压电复合材料PT－P（VDF／TeFE）的静水压压电性

用热轧辊机制备了压电复合材料ＰＴ－Ｐ（ＶＤＦ／ＴｅＦＥ），并利用ＬＣＲ电桥和Ｂｅｒｌｉｎｃｏｕｒｔ电路分别测量了其介电常数和压电常数，实验结果表明它具有良好的静水压压电特性。最后讨论了该复合材料在水听器中的应用     

热物理性质测试技术研究现状和发展趋势

本文在对热物理性质研究在热能工程、材料科学、信息科学、航天工程、环境工程、生物科学、微电子技术和计量学等众多科技领域中的重要性进行探讨的基础上，评述了热物理性质测试技术的研究现状和发展趋势。鉴于薄膜材料在微电子器件、集成电路和微电子机械系统等领域中日益广泛的应用，本文还综述了亚微米－纳米尺度薄膜材料热导率和热扩散率的测试新技术。     

HTR-10燃料元件装卸系统冷态调试

10MW高温气冷实验堆（HTR－10）是一座球床堆，由燃料元件装卸系统实现燃料元件的装卸和循环，且不需要停堆，为保证HTR－10的正常运行，燃料元件装卸系统必须安全，可靠，为此，必须对燃料元件装卸系统进行周密，细致的调试试验和验证，本文介绍了燃料元件装卸系统冷调试的主要调试项目，调试方法和调试结果。     

Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.     

Deposition and Properties of Superconducting MgB2 Thin Films

The recently discovered superconductor MgB₂ with T _c at 39 K has great potential in superconducting electronics. In this paper, we review the deposition techniques used for MgB₂ thin films in the light of a thermodynamic study of the Mg-B system with the calculation of phase diagrams (CALPHAD) modeling technique. This thermodynamic study identifies a growth window in the pressure–temperature phase diagram, in which the magnesium pressure is very high for likely in situ growth temperatures. A Hybrid Physical–Chemical Vapor Deposition (HPCVD) technique that successfully achieves such a high Mg pressure is shown to produce in situ epitaxial MgB₂ thin films with bulk superconducting properties.     

Closed-loop optimal control-enabled piezoelectric microforce sensors

This paper presents a closed-loop optimally controlled force-sensing technology with applications in both micromanipulation and microassembly. The microforce-sensing technology in this paper is based on a cantilevered composite beam structure with embedded piezoelectric polyvinylidene fluoride (PVDF) actuating and sensing layers. In this type of sensor, the application of an external load causes deformation within the PVDF sensing layer. This generates a signal that is fed through a linear quadratic regulator (LQR) optimal servoed controller to the PVDF actuating layer. This in turn generates a balancing force to counteract the externally applied load. As a result, a closed feedback loop is formed, which causes the tip of this highly sensitive sensor to remain in its equilibrium position, even in the presence of dynamically applied external loads. The sensor's stiffness is virtually improved as a result of the equilibrium position whenever the control loop is active, thereby enabling accurate motion control of the sensor tip for fine micromanipulation and microassembly. Furthermore, the applied force can be determined in real time through measurement of the balance force.     

纳米涂层的研究现状与展望

简述了纳米表面涂层制备工艺的研究现状，分析了气相沉积、热喷涂、电刷镀、化学镀和电沉积等不同工艺在制备纳米表面层中的应用情况。介绍了纳米涂层在超硬耐磨、耐腐蚀、耐高温热稳定性等方面研究的新进展，并对纳米涂层的应用范围和领域作了展望。