气化炉锥底砖、激冷环与下降筒的损毁与解决对策

针对国产化大氮肥水煤浆气化炉中锥底砖、激冷环和下降筒使用过程中出现的问题,分析了损毁原因,分别从技术改进、工艺操作和设备管理等方面提出了相应的解决对策,可以不同程度地延长锥底砖、激冷环、下降筒的寿命。     

Cu2O/Cu Cermet as a Candidate Inert Anode for Al Production

Cu₂O/ x Cu ( x =0–25 wt%) cermets were evaluated as a novel partially inert anode for aluminum (Al) production. The physical and mechanical properties, including the compressive strength, flexural strength, thermal expansion coefficient, thermal conductivity, and dc electrical conductivity were tested at room temperature and at temperatures up to 950°C. The coefficient of thermal expansion, compressive strength, flexural strength, thermal conductivity, and electrical conductivity of Cu₂O/Cu cermets increased with increasing Cu content. High-temperature electrical conductivity measurements showed that with increasing temperature, the electrical conductivity increased when the Cu content was below the percolation threshold, while it decreased when the Cu content was above the percolation threshold. A relatively stable CuAlO₂ layer formed on the cermet surface during electrochemical testing, and the corrosion rate of this anode was estimated to be about 1.8–1.9 cm/year in Al production.     

Dispersion deposition of metal — Particle composites and the evaluation of dispersion deposited nickel — Lanthanum nickelate electrocatalyst for hydrogen evolution

A method for the preparation of high surface area coatings and its application towards fabrication of prospective composite electrocatalysts for hydrogen evolution is proposed. Exploratory studies with such a composite, (Ni/LaNiO₃), as a hydrogen electrode in alkaline solutions indicate that it is a more active electrocatalyst than sintered or electrodeposited nickel. The electrocatalytic properties were found to be a strong function of the deposition parameters as well as of the history of the oxide powder.     

Synthesis and properties of new polymerized monomer reactants matrix resins of pyrrolone–benzimidazole copolymers containing pyridine unit

A series of new polymerized monomer reactants (PMR) matrix resins of poly(pyrrolone‐benzimidazole)s containing a pyridine unit (PPBP) were synthesized by polycondensation of monoethyl ester of cis‐5‐norbornene‐endo‐2,3‐dicarboxylic acid, 2,6‐diphenyl ester pyridinedicarboxylic acid or 3,5‐diphenyl ester pyridinedicarboxylic acid, and diethyl ester of 4,4′‐oxydiphthalic acid with 3,3′‐diaminobenzidine in a mixing solution of anhydrous ethyl alcohol and N‐methylpyrrolidone under given temperature and pressure conditions. The resulting resin solutions showed good solubility in polar organic solvents and stability at room temperature. The corresponding PPBP matrix resin, molded powder, and molded plate were prepared by undergoing amidation, imidization, cyclization, and crosslinking reactions when the reaction temperature was increased from 80 to 350°C, successively; the crosslinking structure was formed by the reverse Diels–Alder reaction at 270–290°C under 50 MPa pressure (2.5–3.5 MPa displayed by the pressure meter). The chemical reactions and properties of the resulting PPBP were studied by means of FTIR, TGA, and DMA methods, and the results indicated that the kinds of PPBP materials retain excellent thermal stability and processability; when the initial decomposition temperature was above 620°C the T_g was at 413.5°C for 3,5‐PPBP‐20 molded plate. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3981–3990, 2004     

Development of monolithic catalysts with low noble metal content for diesel vehicle emission control

Topics in Catalysis - Monolith washcoated catalysts with potential for diesel emission control have been developed. Two types of catalysts have been prepared for further study: (1) MnO x supported...     

Mass production of high-quality multi-walled carbon nanotube bundles on a Ni/Mo/MgO catalyst

A new catalyst (Ni/Mo/MgO) is reported, with which one can synthesize multi-walled carbon nanotube (MWNT) bundles with a yield of more than 45 times the amount of the pristine catalyst, using a methane-hydrogen mixture as precursor. Powder X-ray diffraction, Raman spectroscopy and thermal gravimetric analysis show that the purity of the as-prepared MWNTs is over 97%. The diameter of the carbon nanotubes is 9-20 nm, measured by high-resolution electron microscopy on 421 individual MWNTs. The high purity of the as-prepared MWNTs allows us to omit the usual complex purification process required for carbon nanotubes synthesized by chemical vapor deposition. Because of its durable high activity, the Ni/Mo/MgO catalyst in its pristine state is ideal for mass production of high-quality MWNTs. The synergism of nickel and molybdenum is considered the main reason for the high yield of carbon nanotubes.     

Bayesian bivariate generalized Lindley model for survival data with a cure fraction

The cure fraction models have been widely used to analyze survival data in which a proportion of the individuals is not susceptible to the event of interest. In this article, we introduce a bivariate model for survival data with a cure fraction based on the three-parameter generalized Lindley distribution. The joint distribution of the survival times is obtained by using copula functions. We consider three types of copula function models, the Farlie–Gumbel–Morgenstern (FGM), Clayton and Gumbel–Barnett copulas. The model is implemented under a Bayesian framework, where the parameter estimation is based on Markov Chain Monte Carlo (MCMC) techniques. To illustrate the utility of the model, we consider an application to a real data set related to an invasive cervical cancer study.     

Zakarpatsk dolomites

Refractories and Industrial Ceramics -     

Carbon dioxide reforming of methane to synthesis gas over supported Ni catalysts

Carbon dioxide reforming of methane to synthesis gas has been investigated over supported Ni catalysts in the temperature range of 500–850°C. Addition of CaO (10mol%) promoter to the Ni/γ-Al₂O₃ resulted in an increase of reaction rate and an improvement of catalyst stability, which may be related to enhanced reducibility of the promoted catalyst. The kinetic studies show that the overall reaction can be described by a Langmuir-Hinshelwood mechanistic scheme, assuming that methane dissociation is the rate determining step. In addition to adsorbed CO and formate species, three types of carbonaceous species, C, C_β and C_γ, were found to exist on the Ni catalyst. While the active C, species is suggested to be responsible for CO formation, the less active C_β and C_γ species are attributed to causing catalyst deactivation.     

Strain-induced crystallization,Part IV: Induction time analysis

The empirical equation, 1/t_i = Ae^Ei/RT, which expresses the exponential dependence of the reciprocal of crystallization induction time, t_i, has been analyzed and shown to be equivalent to the nucleation rate equations derived earlier in Part III (1). Consequently we have used the t_i measurements obtained earlier by Krueger and Yeh to calculate not only the nucleation rate enhancements but also the melting point elevations, the relative crystal thickness changes and molecular coil extension ratios of shear-crystallization polyethylene. It is shown that polyethylene when crystallized between 129 and 131°C at shear rates between 1.56 and 9.70 sec^?1 can have melting point increases of 4.2 to 7.2°C and crystal thickness decreases of 20 to 25 percent, when compared to those crystallized at 130°C in the quiescent state. The predicted “coil” extension in the melt just prior to shear-induced crystallization ranges between 21 and 36 percent. The results of these analyses as well as those on nucleation rates of polyethylene oxide are discussed in detail.