抗氧剂于有机PTC热敏导电材料性能的稳定作用研究

探讨了抗氧剂在聚乙烯 乙烯 醋酸乙烯酯共聚物 炭黑 (PE EVA CB)体系中的作用。结果表明 ,在体系中加入抗氧剂可以提高材料体系的结构稳定性 ,从而可以在一定程度上改善材料的热电稳定性。当在体系中加入 2 .0 %(w)的抗氧剂时可收到良好效果。     

新型长余辉稀土发光材料发光特性探讨

本文对新型长余辉稀土发光材料在不同照度 ,不同激发时间等多种条件下的发光特性进行了检测 ,并对检测结果进行了分析讨论。     

在柔性变焦系统中的压力变焦镜

从理论上和实验上对水冷镜的镜面曲率半径随压力变化的规律作了研究。对压力变形后镜面相对于球面作了波像差分析，分析表明压力变焦镜用于中红外激光系统是合适的     

钻井过程中硫化氢的处理工艺

目的：防止钻井过程中出现的硫化氢对人身安全和钻具造成危害。方法：分析氢脆破坏机理和处理硫化氢的化学原理。结果：提出了处理硫化氢的关键技术，并结合塔中162井的实钻经验，总结出了钻井过程中对硫化氢的几点认识。结论：提高泥浆pH值、加入除硫剂及提高泥浆密度等措施是钻井过程中处理硫化氢的关键技术，从而有利于富含硫化氢的灰岩、白云岩等裂缝性油气藏的钻井生产。     

光刻胶灰化工艺与深亚微米线条的制作

随着器件尺寸的缩小，细线条的制作成为很关键的工艺，普通光学光刻已接近其分辨率的极限，而电子束光刻和Ｘ射线光刻技术复杂、费用昂贵。本文对光刻胶灰化工艺进行了分析和研究，并应用此工艺进行了深亚微米线条的制作，在普通光学光刻机上制作出宽度小于０．２５μｍ细线条。我们已将此工艺成功地应用在深亚微米ＭＯＳＦＥＴ的制作中。     

聚六亚甲基碳酸酯二醇增韧环氧树脂的结构与性能

采用羟基封端的脂肪族碳酸酯－聚六亚甲基碳酸酯二醇对环氧树脂进行了增韧，通过扫描隧道显微镜，扫描电子显微镜，差示扫描量热分析以及动态力学性能分析等方法研究了增韧ＥＰ的结构与性能的关系。     

脉冲化学沉积非晶态Ni—P合金原子分布函数研究

采用Ｘ射线衍射分析技术，研究了脉冲化学镀非晶态Ｎｉ－Ｐ合金的原子分布和函数，得出其短程有序原子集团的尺度为０．７５４ｎｍ，约为熔体激冷法获得的非晶态Ｎｉ－Ｐ合金短程有序畴的１／２。并利用脉冲化学沉积非晶态合金的微机制择这一结果进行了解释。     

Efficient performance analysis of asynchronous cellular CDMA overRayleigh-fading channels

The bit error rate (BER) analysis of a direct-sequence code-division multiple-access (DS-CDMA) cellular system over a Rayleigh-fading channel often results in complicated expressions even though the Gaussian approximation is applied. A combined probability density function (pdf) approach for the forward link and a mean-method technique for the reverse link are proposed to significantly reduce the computational complexity. The simplified BER expressions are derived and yield accurate results     

Textural evolution in electrodeposits under the influence of adsorbed foreign species: Part I Textural evolution in iron electrodeposits affected by hydrogen co-deposition

Textural evolution in electrodeposits is strongly affected by foreign species in the electrolyte and also by the co-deposition of hydrogen. The effects of foreign species on textural development in electrodeposits were studied by employing a Monte Carlo model. This model is based on physical principles and incorporates parameters which are used to control electrodeposition processes. An attempt was made in the simulation to reflect the basic process of the deposit growth, and to identify the factors responsible for the texture formation and its variation with the deposition condition. It is assumed that the texture of the deposit results from the minimization of the free energy of the system. Based on this assumption, it was demonstrated that the surface-energy anisotropy played an important role in the formation of fibre texture. In particular, the model can be used to simulate textural evolution under the influence of adsorbed foreign species, because the surface-energy anisotropy is modified by the adsorbed foreign species. Part I of the paper presents results of our studies on iron electrodeposition with the emphasis on the effect of hydrogen adsorption on iron deposit texture. Relevant experimental results have also been presented to corroborate the simulation study. Part II of the paper presents simulation studies of textural evolution in copper deposits under the influence of adsorbed potassium and chloride ions. This revised version was published online in November 2006 with corrections to the Cover Date.     

DST压恢法在大港油田的应用

非自喷井解释方法一直是困扰试井界的难题之一。自1995年底应用DKS2．0软件中DST压恢分析法先后处理了大港油田200多层实测资料以来，发现一部分井与常规分析法的处理结果完全不同。这些井多出现在均质无限大油藏，且其压力及压力导数曲线开口小、导数曲线驼峰较小。通过对DST压恢分析法在大港油田应用情况的分析，认为此方法适用于均质非自喷井，尤其是处理低渗且地层受污染井的结果比较符合地层的实际地质情况，其成果的应用对地层改造有一定的指导作用。