Surface morphology and nodule formation mechanism of cellulose acetate membranes by atomic force microscopy

By the use of atomic force microscopy (AFM), formation mechanism of nodular structure in cellulose acetate membranes was systematically investigated. Elementary factors affecting the nodule formation were delineated on the basis of both kinetic and thermodynamic considerations. It was shown that (1) the exact nature of nodular structure is thermodynamic equilibrium glassy state; nodular structure will vanish in the rubbery state; (2) the thermodynamic factor affecting nodule formation is the membrane formation temperature; with the membrane formation temperature decreasing, more chain segments are able to form nodular structures; (3) nodule formation is dependent on the segment rearrangement; variation of the solvent environment is the major kinetic factor affecting the segment rearrangement and nodule formation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1328–1335, 2003     

添加物对ZrO2系快离子导体烧结性能的影响

本文介绍了１３２０℃下，ＣａＯ，Ｙ２Ｏ３等稳定剂，低融物组成及１－６价阳离子化合物对ＺｒＯ２烧结性能的影响并列举出材料的晶型及某些主要性能。     

CO2在全氟羧酸离子交换膜内促进传质特性的研究

本文以全氟羧酸离子交换膜为支撑体、乙二胺(EDA)为活性络合剂、制备促进传质膜。在常用的工业条件下,测定了纯CO_2以及CO_2/N_2二元混合物在该膜内的渗透通量。实测结果表明,此膜对CO_2的促进因子可达13.8,而对CO_2/N_2的分离因子高达316。本文假设促进传质过程的控制步骤为气体在膜相的扩散,据此导出了相应的机理模型,该模型与实测结果吻合良好。     

陶瓷原料中SiO_2的钼酸银沉淀法测定

通过实验,发现络合滴定用的指示剂——偶氮胂—Ⅲ,可用作本测定中的沉淀滴定指示剂。根据标准 AgNO_3溶液同 MoO_4~(2-)的定量反应,计算出以硅钼黄 Hg[Si(Mo_2O_7)_6]形式存在的MoO_4~(2-)量,再据以算出硅酸盐中 SiO_2的含量。     

甲缩醛空气氧化制甲醛催化剂的研制和工艺条件探讨

考察了铁钼催化剂对甲缩醛空气氧化制甲醛的催化性能。制备了多种不同钼铁比和第三、第四组分的催化剂,进行了活性评价和筛选,探讨了适宜的工艺条件范围。对于所选定的催化剂(钼铁比为1.82～1.88;铬铁比为0.1～0.38)在适宜的工艺条件(甲缩醛进料浓度4.5～5.5％;甲缩醛和氧气进料比1:2.0±0.2;空速12000～22000h~(-1);热点温度370～390℃)下,甲醛收率可达85％左右。     

环十二烷空气催化氧化制环十二醇及酮

研究了以偏硼酸为催化剂的环十二烷常压空气氧化制环十二醇、酮的反应规律,采用鼓泡搅拌釜作为反应器,在间歇操作方式下,通过改变通氧速率、搅拌转速、反应温度、催化剂用量,测定了反应液中烷、醇、酮的浓度随反应时间的变化关系,得到了醇、酮选择性与烷转化率的关系,确定了适宜的工艺操作条件。在连续操作方式下,通过改变烷的进料速度,测得了反应产物中烷、醇、酮的浓度随空时的变化关系,并与间歇操作获得的实验结果进行了比较。     

EDTA在尿素换热设备清洗中的应用

草酸法清洗换热设备垢层时对设备腐蚀严重。EDTA能与积垢中的铁离子反应生成溶于水的络合离子,达到清洗积垢的目的,对设备腐蚀程度也小,通过EDTA、Fe含量的变化可判断清洗程度。     

Factors influencing magnetic polymer microspheres prepared by dispersion polymerization

Magnetic iron oxide (Fe₃O₄) was prepared by a coprecipitation method. Core–shell composite magnetic polymer microspheres with carboxyl groups were synthesized by the dispersion polymerization of styrene and acrylic acid in the presence of magnetic oxide, and dibenzoyl peroxide was used as an initiator. The synthesized magnetic polymer microspheres were characterized with X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and so forth. The results indicated that the product was single‐phase Fe₃O₄, and its average size was about 10 nm. The configuration of the microspheres, which contained carboxyl groups, was spherical, and the average size was about 2 μm. The results of vibrating sample magnetometry tests showed that the magnetic powders produced by different surfactants had different saturation magnetizations. When poly(ethylene glycol) with a weight‐average molecular weight of 4000 was used as a surfactant, the saturation magnetization of the samples reached 69.2 emu/g. The factors that affected the shape, magnetism, size, and distribution of the microspheres were also studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007