ԥ�������С��¶���ͳ��������

豫西地区中、下二叠统太原组、山西组、上石盒子组及下石盒子组煤成气资源丰富，但成煤环境纵向发育与横向变化较大，规律难于把握。因此，开展煤成气源岩沉积环境研究有利于该区煤成气资源的勘探与开发及合理的利用。通过露头、钻井、地震资料及分析、测试资料的综合研究认为：本区中、下二叠统主要沉积了一套浅海碳酸盐岩，海湾-泻湖、潮坪、沼泽、障壁岛(砂质滩、坝)及三角洲相陆源碎屑岩和煤层。从总的沉积特征来看，下二叠统太原组、山西组基本上发育滨、浅海相碳酸盐岩、陆源碎屑岩和煤的混合沉积。上二叠统上、下石盒子组则以海陆交互相陆源碎屑沉积为主，三角洲及三角洲平原沼泽十分发育；沉积环境具有自下而上，自南东向北西方向由海相逐步过渡为陆相的基本特点。其煤成气源岩沉积环境以早二叠世山西期潮坪、泻湖过渡带之滨岸沼泽环境为最佳，其次为中二叠世下石盒子期三角洲平原沉积之平原沼泽环境。     

高温深层缓速酸化优化研究及应用

针对临南油田酸化效果差的问题,从油藏地质特点出发,分析了制约其酸化效果的主要因素,即地层温度、铁离子二次沉淀、地层深部改造等。通过室内研究,优选出一种高性能的缓速酸,该酸液具有溶蚀率高、缓速性能好、能有效防止铁离子二次沉淀、与地层水配伍性好等特点。同时还对酸化施工工艺进行了优化,配套了适合的返排工艺。该工艺在现场应用后,酸化效果得到了明显的改善。     

硅微板条谐振式传感器谐振频率分析及计算

对硅微机械谐振式传感器的谐振频率计算提出了新的物理模型—两端固支薄板条模型，该模型不同于常说的硅桥（梁）或硅弦模型。计算结果表明该模型更符合实际，优于有关文献结果。     

Renal osteodystrophy in diabetic patients

To assess the effects of diabetes mellitus on renal osteodystrophy, we examined the database of 256 patients (45% on hemodialysis and 55% on peritoneal dialysis) who were prospectively studied in three Toronto dialysis centers between October of 1987 and 1989. All patients had serial documentation of their clinical, laboratory and risk parameters of bone disease, and completed a series of investigations that included the deferoxamine test, measurement of intact 1-84 PTH levels, and an iliac crest bone biopsy. Twenty-five percent of these patients were diabetic. When compared to non-diabetic patients, they were on dialysis for a shorter duration (2.4 +/- 0.3 vs. 4.7 +/- 0.3 years; P < 0.0002), used calcium carbonate as the only phosphate binder more frequently (40 vs. 25%; P < 0.007), and had lower parathyroid hormone levels (12 +/- 1.4 vs. 24 +/- 2.3 pmol/liter; P < 0.002). High-turnover bone disorders (that is, osteitis fibrosa and mixed disorder) were distinctly uncommon (8 vs. 33%; P < 0.01 by Fisher's exact test), while the mild (19 vs. 9%; P = NS) and the aplastic disorders (with mean stainable bone surface aluminum of 6.5 +/- 0.7%) (46 vs. 31%; P = NS) tended to be more common in diabetic patients. The prevalence of aluminum bone disease was the same in both groups (27%). Diabetic patients ingested a smaller cumulative dose of aluminum gels (3.7 +/- 0.6 vs. 9.3 +/- 1.1 kg; P < 0.005), yet had a higher rate of aluminium accumulation on bone surfaces than non-diabetic patients (1.5 +/- 0.19 vs. 0.96 +/- 0.10% per month on dialysis; P < 0.015).(ABSTRACT TRUNCATED AT 250 WORDS)     

瞬态光的光电摄谱测量

“光电摄谱法”是一种辐射光谱计量参数的测量方法,此法解决了单次脉冲闪光灯辐射光谱相对能量分布的精确测量问题。本文介绍了这种方法的测量原理、方法和特点,同时阐述了对接收器件、光路系统和时控电器系统的要求,并以自行研制的闪光光谱测定仪为例,对其计量参数波长和相对能量的标定与校正给予了必要的讨论,最后以实测结果证实了该方法的可靠性。     

含油废水处理

在水量水质调查的基础上，本文提出了以出水回用为目的的含油废水隔油调节沉淀－混凝沉淀－砂滤处理工艺，动态模型试验表明，废水中油和ＣＯＤ的去除率分别达到９５％和９０％，出水浊度低于２，此水质完全可回用于有关生产车间。     

Efficient Skyline and Top-k Retrieval in Subspaces

Skyline and top-k queries are two popular operations for preference retrieval. In practice, applications that require these operations usually provide numerous candidate attributes, whereas, depending on their interests, users may issue queries regarding different subsets of the dimensions. The existing algorithms are inadequate for subspace skyline/top-k search because they have at least one of the following defects: 1) they require scanning the entire database at least once, 2) they are optimized for one subspace but incur significant overhead for other subspaces, or 3) they demand expensive maintenance cost or space consumption. In this paper, we propose a technique SUBSKY, which settles both types of queries by using purely relational technologies. The core of SUBSKY is a transformation that converts multidimensional data to one-dimensional (1D) values. These values are indexed by a simple B-tree, which allows us to answer subspace queries by accessing a fraction of the database. SUBSKY entails low maintenance overhead, which equals the cost of updating a traditional B-tree. Extensive experiments with real data confirm that our technique outperforms alternative solutions significantly in both efficiency and scalability.     

浅谈原油顺序输送过程中混油量的计算

针对原油顺序输送工艺的特点,分析了原油顺序输送产生混油量的原因,给出了混油量计算公式。指出混油的形成与输送距离、油品种类、输量、停输时间、地形等有关。举例对东黄复线顺序输送所产生的混油量进行分析计算,给出了顺序输送过程中减少混油量的措施。     

LiMn2O4纳米粉的湿化学合成与表征

采用湿化学方法，通过水溶液中的化学反应直接合成纳米级LiMn2O4化合物，其结构基本上为无定型，但XRD图谱中已出现LiMn2O4特征峰，说明在水溶液中已初步形成尖晶石结构，运用XRD，SEM，TG－DTA等现代检测手段对样品的性能进行进行了表征，XRD及SEM等分析结果表明，合成样品经简单热处理后，晶型结构完善，形貌规整，均匀，比表面积积显著减小，粒度明显变粗。TG－DTA热分析证明，样品在低于900℃的温度下进行热处理时，仅发生LiMn2O4的晶化过程，产物的化学组成稳定，该法合成锂离子电池正极材料LiMn2O4，具有工艺流程简单，产物的成分，结构及粒度均匀等特点。     

激光熔覆用钴基合金粉末的研究

对激光熔覆用WFLC－11钴基合金粉末的激光熔覆工艺和熔覆层性能进行了研究，获得了WFLC－11钴基合金粉末激光熔覆层厚度与最小比能量关系曲线和熔覆层的组织、高温硬度等性能数据，为选择和使用WFLC－11钴基合金粉末提供了依据。