国外废旧塑料的再生利用

简述了废旧塑料的处理方法。着重介绍了世界工业发达国家,如美国、西欧、日本等国家近年来废旧塑料再生利用的情况及部分公司废旧塑料的再生回收技术。在世界性节能和节约资源的浪潮中,我国有关部门与行业应努力借鉴国外经验,开发废旧塑料的再生利用技术。     

煤焦油加工技术的探讨

煤焦油曾为近代有机化工作出了历史性贡献。我国煤焦油资源丰富,但尚未得到有效和合理利用。根据高温煤焦油的组成特点,对煤焦油的初馏、沥青加工利用和煤焦油产品的深加工技术进行了探讨,提出一些建议。此外还讨论了煤焦油加工企业的发展模式。     

有广阔市场前景的化工产品—过氧化钙

本文叙述过氧化钙的性质,并以实例说明过氧比钙在水产养殖、食品加上、果蔬保鲜。环境保护、农作物栽培、橡胶及化工等奋方面的应用。     

Event-driven observer-based output feedback control for linear systems

This paper concerns the problem of event-driven observer-based output feedback control of linear systems. Contrary to normal sampled-data control systems, where the controller is updated periodically, in event-driven systems, it is updated only when an “event” happens, and a typical event is defined as some error signals exceeding a given threshold. Both continuous- and discrete-time event detector cases are considered. It is shown that even with the significantly reduced sampling frequency, the global uniform ultimate boundedness of the event-driven closed-loop systems can also be guaranteed. A numerical example is finally used to illustrate the effectiveness and advantages of the proposed approaches.     

Squaring down of general MIMO systems to invertible uniform rank systems via pre- and/or post-compensators

Pre- and/or post-compensators are designed to square down a general MIMO system to a uniform rank system, the structure of which is almost similar to a SISO system. The method of squaring down either does not change the finite zero structure of the given MIMO system or simply adds additional finite zeros in the left half s-plane. The significance of such a squaring down lies in the simplicity of the structure of a uniform rank system lending itself for easy analysis and control design.     

Local artificial boundary conditions for Schrödinger and heat equations by using high-order azimuth derivatives on circular artificial boundary

The aim of the paper is to design high-order artificial boundary conditions for the Schrödinger equation on unbounded domains in parallel with a treatment of the heat equation. We first introduce a circular artificial boundary to divide the unbounded definition domain into a bounded computational domain and an unbounded exterior domain. On the exterior domain, the Laplace transformation in time and Fourier series in space are applied to achieve the relation of special functions. Then the rational functions are used to approximate the relation of the special functions. Applying the inverse Laplace transformation to a series of simple rational function, we finally obtain the corresponding high-order artificial boundary conditions, where a sequence of auxiliary variables are utilized to avoid the high-order derivatives in respect to time and space. Furthermore, the finite difference method is formulated to discretize the reduced initial–boundary value problem with high-order artificial boundary conditions on a bounded computational domain. Numerical experiments are presented to illustrate the performance of our method.     

Eco‐friendly durable press finishing of cellulose‐containing fabrics

To impart easy‐care properties to cellulose‐containing fabrics along with avoiding any harmful effects of formaldehyde on both the health and the environment, attempts have been made to use citric acid (CA) as an ester crosslinking agent along with different catalytic systems in the absence and presence of certain additives. Further, fixation conditions, type of crosslinking agent, as well as type of substrate have been studied. Results revealed that the enhancement in carboxyl content, performance properties, and the decrease in tear strength (TS) as well as in whiteness indices (WI) of the finished fabric samples were increased by increasing CA concentration up to 80 g/L and by raising thermofixation temperature from 140 up to 180°C for 90 s. Inclusion of triethanolamine hydrochloride (TEA. HCl), decreased the carboxyl content, TS, color strength K/S, as well as oily stain release rating (SRR) of the finished fabric samples along with an increase in bound nitrogen (%N), wrinkle recovery angle WRA, and an improvement in WI without affecting the durable press rating (DP). Within the range examined (0–30 g/L), increasing PEG‐600 concentration improved the wet resiliency, TS, as well as WI properties of the finished samples. Increasing DMDHEU ratio in the CA/DMDHEU crosslinking system gave rise to an increase in %N, WRA (dry and wet), DP, as well as in free CH₂O of finished fabrics, along with a slight improvement in WI values. On the other hand, the TS, carboxyl content, K/S, SRR values of the finished fabric samples were lower at a higher DMDHEU ratio. Increase in carboxyl content, %N, WRA (dry and wet), DP and SRR, as well as extent of post dyeing (K/S) of the treated fabric samples upon using different ester crosslinking agents followed the descending order: citric acid > pyromellitic dianhydride. The opposite holds true for the TS, and WI values. Among the esterifying catalysts used, and for a given set of finishing conditions, NaH₂PO₂ · H₂O proved to be the most effective one, and the following order of effectiveness may be drawn: NaH₂PO₂ · H₂O > K₂HPO₄ > Na₃–citrate > Na₂–tartrate. Inclusion of silicone softener in the finishing formulation brought about an improvement in softeness degree, WRA, %N, DP, TS as well as K/S values along with a decrease in carboxyl content, SRR, and WI values of the treated fabric samples, regardless of the used silicone softener.The performance properties of the finished fabric samples were determined by the type and nature of the substrate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2243–2253, 2002     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

VideoGraph: a non-linear video representation for efficient exploration

In this paper we introduce VideoGraph, a novel non-linear representation for scene structure of a video. Unlike classical linear sequential organization, VideoGraph concentrates the video content across the time line by structuring scenes and materializes with two-dimensional graph, which enables non-linear exploration on the scenes and their transitions. To construct VideoGraph, we adopt a sub-shot induced method to evaluate the spatio-temporal similarity between shot segments of video. Then, scene structure is derived by grouping similar shots and identifying the valid transitions between scenes. The final stage is to represent the scene structure using a graph with respect to scene transition topology. Our VideoGraph can provide a condensed representation in the scene level and facilitate a non-linear manner to browse videos. Experimental results are presented to demonstrate the effectiveness and efficiency by using VideoGraph to explore and access the video content.     

Muscular fatigue and maximum endurance time assessment for male and female industrial workers

A single arm pushing experiment was conducted in an electronic factory in Yantai, China to assess muscular fatigue using the theoretical models of muscular strength and maximum endurance time (MET) developed by Ma et al. (2009). Seventy seven workers, including 38 males and 39 females, participated in the study. The muscular strength of pushing was measured after the subject pushed a stick, with a force of 2.5 kgf, for 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 min. Fatigue rate was determined based on a regression approach. In addition to the theoretical model, the MET for such a pushing task was also determined using four empirical models in the literature. The results indicated that females were more resistant to muscular fatigue than males in the pushing task. The results of the muscular strength prediction show that the predictability of the muscular strength model is acceptable. The prediction errors for muscular strength for female subjects were significantly lower than those of the male subjects. The predicted MET using the theoretical model, with a group constant k, was highly correlated with those using the empirical models compared in the current study.