Reaction mechanism and microstructure evolution of reaction sintered <Emphasis Type="Italic">h</Emphasis>-BN

Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method. The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the reaction mechanism was discussed. Results showed that the reaction between B and N₂ occurred vigorously at temperatures ranging from 1 000 °C to 1 300 °C, which resulted in the generation of t-BN. When the temperature exceeded 1 450 °C, transformation from t-BN to h-BN began to occur. As the sintering temperature increased, the spherical particles of t-BN gradually transformed into fine sheet particles of h-BN. These particles subsequently displayed a compact arrangement to achieve a more uniform microstructure, thereby increasing the strength.     

嵌入式消毒柜门内衬板拉深模具设计

通过对嵌入式消毒柜门内衬板工艺分析，确定其模具加工方案，同时对试模过程中存在的问题作进一步的剖析。     

导磁体在汽车零件感应加热中的应用技术

本文简单介绍了导磁体工作的基本原理，并给出在汽车零件大规模生产中所积累的导磁体应用的一些经验，以阐明如何更有效地使用导磁体。     

EL-CID电磁铁心故障检测试验的应用研究

为了检验发电机定子铁心质量,在制造过程中和安装现场,对发电机定子铁心进行试验是必不可少的.目前国内针对定子铁心更多地是采用常规试验方法,但是常规铁损试验所需的设备容量大、试验线路复杂,而且经济性较差、效率低下.而采用电磁定子铁芯故障探测仪(EL-CID)铁心试验只需提供约4％的额定磁通量,即可完成对铁心故障的诊断,其所需的励磁电源容量较小且容易配备和携带.为了更好地利用EL-CID检测方式进行铁心质量的判定,本文通过模拟多种故障状况下的试验,论证了EL-CID的使用条件和影响因素,为实际工作中EL-CID的应用提供更好的参考依据.     

研究合金定向凝固组织的脉冲磁场设备的研制

介绍了脉冲电磁场发生设备的工作原理 ,设计等。并介绍了其如何与合金的定向凝固设备结合 ,以实现对合金的定向凝固组织在脉冲电磁场作用下的研究。     

Pure spatial rich model features for digital image steganalysis

The SRM (Spatial Rich Model) is a very effective steganalysis method. It uses statistics of neighboring noise residual samples as features to capture the dependency changes caused by embedding. Because the noise residuals are the high-frequency components of image and closely tied to image content, the residuals of different types of image regions have different statistical properties and effectiveness for steganalysis. In this paper, the effectiveness of the residuals is investigated. Then the effectiveness of the statistics collected from different types of neighboring residual samples is investigated from the FLD (Fisher Linear Discriminant) viewpoint, and ineffective, effective and high-effective neighboring residual samples are defined. The ineffective neighboring residual samples are not likely to change during embedding, and if they are counted in statistics, they may mix the features with noise and make the features impure. Pure SRM features are extracted based on neighboring noise residual sample selection strategy. Furthermore, multi-order statistical features are proposed to increase the statistical diversity. Steganalysis performances of the statistical features collected from different types of neighboring residual samples are investigated on three content adaptive steganographic algorithms. Experimental results demonstrate that the proposed method can achieve a more accurate detection than SRM.     

市政工程给水管道施工质量控制

在各个城市市政工程给水管道的施工中,相关部门在质量监测和管理等方面的工作中仍然存在不足之处。因此,如何解决市政工程给水管道施工中出现的各种故障,是相关施工人员值得思考的问题。