浅谈脱硫液中PDS质量浓度测定方法

提出了在以PDS催化剂作为单一的脱硫催化剂时,脱硫循环液中贫富液的PDS质量浓度的测定方法,可有效地指导在脱硫工序投加PDS的操作及生产运行,为确保出脱硫工序煤气中H2S含量稳定控制在20mg/L以内奠定了基础。     

离子色谱法测定配煤、焦炭和焦油中的氯含量

研究了用带电导检测器的离子色谱对配煤、焦炭和焦油中的Cl- 进行测定的方法。在YSA型8126A-4# 阴离子分离柱上用3.5mmol/LNa2CO3、5.3mmol/LNaHCO3做淋洗液对Cl-进行测定,方法简便快速。Cl-的检出限为2×10-6。该法也适用于F-、NO2-、NO3-、SO42-等的测定。     

[Cu_2(Gly—GlyO)_2(OH)_2(4,4—bpy)]·9H_2O配合物合成、晶体结构研究

采用Gly—GlyOH,4,4＇—联吡啶与Cu(NO_3)_2·H_2O在二次水溶液中反应,合成出以4,4＇—bpy为中继基,Gly—Glyo为螯环新型双核铜配合物。经X射线单晶结构分析确定该配合物品体的化学结构式:[(H_2NCH_2CONHCH_2COO) Cu(OH) (C_(10)H_8N_2)Cu(OH) (H_2NCH_2CONHCH_2COO)]·9H_2O.晶体属于三斜晶系,P_空间群,晶胞参数a=1.1412nm,b=1.2298nm,C=1.4269nm,α=113.82°,β=101.91°,y=103.64°,V=1.6747nm~3,Z=2。衍射数据是在Nicolet XRD R3型四圆衍射仪上收集,结构参数经块矩阵最小二乘法精修后,最终一致性因子R值为0.068,RW值为0.057。     

Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

CaO-SiO2系玻璃的析晶动力学研究

利用溶胶-凝胶法制得CaO-SiO2系基础玻璃,通过差热分析曲线分析质量比为CaO-SiO2玻璃的析晶能力。经分析,其析晶活化能E=457.1kJ·mol-1,而晶化生长指数是随升温速率的不同而不同,速率越大,晶化生长指数越小。     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

塑料啤酒瓶开发现状

介绍了塑料啤酒瓶的优点,详细介绍了各种以PET为基础的改性啤酒瓶材料,并列举了大量的开发实例。     

Thermal analysis of styrene–alkyl methacrylate polymers. I. Glass transition temperatures

The glass transition temperatures (T_g's) of several polystyrenes and styrene–alkyl methacrylate copolymers and terpolymers were measured using thermomechanical analysis (TMA) and differential scanning calorimetry (DSC). The polymers studied had number-average molecular weights from 3000 to 250,000 g/mole. The results indicate that the composition dependence of the T_g's for the copolymers and terpolymers can be satisfactorily described by a general Fox equation. In general, the measured T_g's of the copolymer and terpolymer samples depend more on the steric effects of the constituent pendent groups than on their molecular weights. The chain flexibility rather than the size of the pendent group is the determining factor in the glass transition properties of the styrene polymers.     

物联网环境下企业内部控制环境研究

物联网作为未来的发展趋势之一,将在各个方面决定未来世界和人类社会的发展方向。而自智慧地球、感知中国等战略提出以来,世界各国也纷纷开展物联网领域的规划布局,将物联网建设上升到国家战略。物联网在全世界范围内掀起了继计算机和互联网之后的第三次信息革命浪潮。在这空前火爆的物联网宏观背景下,微观企业也不可避免的受到物联网影响。在这一背景下,通过分析物联网环境对企业内部控制环境的影响。本文认为,物联网环境下企业内部控制环境将更加信息化、虚拟化、智能化。     

ZrO2对CaO-SiO2系玻璃析晶的影响

通过DSC曲线研究了不同含量的ZrO2对CaO-SiO2系玻璃析晶的影响,根据JMA方程计算动力学参数(如析晶活化能E、频率因子ν、晶化指数n)。从计算结果可以看出,随着ZrO2含量的增加,析晶活化能E减少,而频率因子ν和晶化指数n增加。当ZrO2含量为7%时,E值最小:235.58kJ/mol;n值最大:4.70。说明ZrO2在CaO-SiO2玻璃体系是有效的晶核剂。