顺酐化SBS的钠离聚体形式与丙烯酰胺的乳液接枝共聚

研究了顺酐化SBS的钠离聚体与丙烯酸胺以过氧化苯甲酰为引发剂的乳液聚合,得到了共聚的较佳条件.并以IR及DSC表征了试样的组成和多相结构.     

锤头用中锰耐磨铸钢的生产与应用

含碳含硅较高的中锰铸钢是一种可用于制造锤头的耐磨铸钢，破碎白云石时，此种钢制作的锤头的单耗为７．１ｇ／ｔ，而高锰钢制作的锤头单耗为１７．４ｇ／ｔ。中锰耐磨铸钢属脆性材料，在非强烈冲击条件下使用，是高锰钢耐磨性的２．４５倍，适用于破碎中低硬度的矿石。文中介绍了中锰铸钢的成分、生产工艺、热处理过程和机械性能。     

Measurement and Correlation for Solubility of (S)-(+)-2,2-Dimethyl-cyclopropane Carbox Amide in Different Solvents

1 INTRODUCTION (S)-(+)-2,2-dimethylcyclopropane carbox amide [(+)-DMCPCA, Fig.1] is a key intermediate of Cilas- tatin, an inhibitor of dehydropeptidase-I. As the syner- gist of imipenem (an antibiotic drug), cilastatin is widely used in clinical applications and has prosper- ous prospects[1]. In industrial manufacture[2―6], as the optical intermediate, the chemical and optical purity of (+)-DMCPCA would affect the quality of cilastatin. So, the separation and purification are impo…     

莫来石纤维多孔陶瓷负载性能研究

用酸性偏磷酸盐作粘结剂、加压排液法成型制备了孔隙率高达96％的莫来石纤维多孔陶瓷，采用真空浸渍法，对其负载稀土复合金属氧化物La0.8Sr0.2CoO3的性能进行了研究，考察了浸渍时间、浸渍次数对负载量的影响，得出最佳浸渍时间为60min，浸渍次数为2次。通过扫描电镜(SEM)表征了内部架构，最后指出莫来石纤维多孔陶瓷有望成为具有较好效果的新型催化剂载体。     

蔗渣碱木质素制紫丁香醛和香兰素的研究──Ⅰ.蔗渣碱木质素低分子氧化产物的制备

本文化选了蔗渣碱木质素碱性氧化制备紫丁香醛、香兰素等木质素氧化产物的催化剂和最佳工艺条件。在选定的最适工艺条件下，蔗渣木质素三种主要氧化产物紫丁香醛、香兰素和对羟基本甲醛的氧化转化率为19．39％，其中紫丁香醛和香兰素为17．19％，表明选用蔗渣碱木质素为原料，应用本文所提供的工艺以生产紫丁香醛和香兰素是可行的。     

CaCO3/natural rubber latex nanometer composite and its properties

Calcium carbonate/natural rubber (NR) latex nanometer composites were prepared by adding nanometer CaCO₃ whose surface had been treated to natural rubber latex (NRL) before sulfuration. The physical, thermooxidative aging, and thermal degradation properties and the ultra‐microstructure were analyzed with a multipurpose material testing meter, a thermal analysis meter and a Philips XL‐30 SEM, respectively. The results showed that the structures and properties of nanometer composites could be clearly improved by NRL mixed with surface‐treated nanometer CaCO₃. The physical properties of the nanometer composites were best when the content of surface treatment agent was 2.5% (to nanometer CaCO₃), the nanometer CaCO₃/NRL content was 3:100, and the stirring time for treating the surface of the nanometer CaCO₃ was 20 min. Simultaneously, the thermooxidative aging resistance of the nanometer composites also was significantly improved. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3442–3447, 2006     

一次多级离心泵运行故障处理及分析

简要介绍了实际生产中多级离心泵存在的问题,并分析了故障原因和处理措施。     

浅析注塑工艺与设备对聚酯瓶坯粘度降的影响

本文就碳酸饮料瓶用聚酯瓶坯生产过程的三个环节中，因注塑工艺与设备影响所产生的粘度降提出解决方法。     

模糊控制器在窑炉温度控制系统中的应用及计算机仿真

对陶瓷工业窑炉中的温度模糊控制问题进行了探讨,提出了模糊控制器在窑炉温控上的具体应用方法,并进行了计算机仿真,仿真结果表明模糊控制效果良好,具有较好的应用前景。     

A block copolymer nanotemplate for mechanically tunable polarized emission from a conjugated polymer

A polymer blend system consisting of polystyrene grafted onto poly (p-phenylene ethynylene) (PS-g-PPE) and poly (styrene-block-isoprene-block-styrene) triblock copolymer (SIS) yields highly polarized emission due to the unidirectional alignment of the PPE molecules. During the roll casting, the triblock copolymer microphase separates and creates unidirectionally aligned PS cylindrical microdomains in the rubbery PI matrix. PPE, a fluorescent conjugated polymer, was grafted with polystyrene (PS) side chains that enabled sequestration and alignment of these rigid backbone emitter molecules into the PS microdomains of the SIS triblock copolymer. Deforming the thermoplastic elastomer in a direction perpendicular to the orientation direction of the cylinders causes rotation of the PS cylinders and the PPE emitter molecules and affords tunable polarized emission due to re-orientation of the PPE containing PS cylinders as well as film thinning from Poisson effect.