Structural Reliability Analysis for Implicit Performance with Legendre Orthogonal Neural Network Method

In order to evaluate the failure probability of a complicated structure, the structural responses usually need to be estimated by some numerical analysis methods such as finite element method (FEM). The response surface method (RSM) can be used to reduce the computational effort required for reliability analysis when the performance functions are implicit. However, the conventional RSM is time-consuming or cumbersome if the number of random variables is large. This paper proposes a Legendre orthogonal neural network (LONN)-based RSM to estimate the structural reliability. In this method, the relationship between the random variables and structural responses is established by a LONN model. Then the LONN model is connected to a reliability analysis method, i.e. first-order reliability methods (FORM) to calculate the failure probability of the structure. Numerical examples show that the proposed approach is applicable to structural reliability analysis, as well as the structure with implicit performance functions.     

基于地形梯度的典型小流域景观类型分布特征分析——以高建堡流域为例

地形在一定程度上对土地利用方向和方式的变化以及土地利用空间格局的形成有着重要影响.以彭阳县高建堡流域为例,按生态恢复措施将流域划分成14种景观类型,利用GIS空间分析功能,借助DEM提取高程和坡度,分析高建堡流域2013年景观类型在不同高程带、坡度带的结构特征及在地形位梯度带上的分布特征,以期为该地区生态恢复及水土保持措施优化提供决策依据.结果表明:景观类型在1 722~1 822 m高程带分布最多;坡向以斜、陡坡居多,急、缓坡次之;荒山自然修复、混交林、沟谷景观分布的优势区间集中于低地形位区间,经果林、水平梯田、建设用地、乔木林及生物围栏等景观分布的优势区间集中于中地形位区间,退耕还林(草)及鱼鳞坑等分布的优势区间集中于中高地形位区间.     

MBR-CANON工艺处理生活污水的快速启动及群落变化

为研究全程自养脱氮工艺(CANON)处理生活污水的可行性,在常温膜生物反应器（MBR）中,保持进水氨氮不变,采用逐渐缩短水力停留时间(HRT)的策略在限氧条件下快速富集氨氧化菌(AOB),之后减小曝气量并进一步缩短HRT富集厌氧氨氧化菌(anammox),并通过DGGE技术分析不同阶段的种群变化．结果表明：CANON工艺在78 d内成功启动,总氮去除率达80％,总氮去除负荷RNR达0.95 kg·m-3·d-1;将该工艺应用于生活污水的处理,实现了COD和氨氮的同时高效去除;微生物群落发生了较大变化,稳定运行的反应器中氨氧化细菌为亚硝化单胞菌属(Nitrosomonas),厌氧氨氧化菌为Candidatus Kuenenia stuttgariensis．MBR-CANON工艺可以有效应用于常温生活污水的脱氮．     

桥梁运营管理信息化平台设计关键问题研究

随着公路桥梁建设数量和使用年限的不断增长,公路桥梁开始由快速建设阶段向养护管理阶段过渡.大规模的桥梁建设和巨大的桥梁设施养护需求,从安全、经济、生态环保等方面对公路交通基础设施建设发展提出了更高的要求,而桥梁运营信息化的出现,则为实现桥梁运营规范化管理、降低养护成本提供了切实可行的途径.本文主要对数据标准、数据处理技术、数据存储技术等桥梁运营信息化平台建设的关键技术进行了研究,为桥梁运营信息化平台的建设提供思路和借鉴.     

Dynamic cluster member selection method for multi-target tracking in wireless sensor network简

Multi-target tracking（MTT） is a research hotspot of wireless sensor networks at present.A self-organized dynamic cluster task allocation scheme is used to implement collaborative task allocation for MTT in WSN and a special cluster member（CM） node selection method is put forward in the scheme.An energy efficiency model was proposed under consideration of both energy consumption and remaining energy balance in the network.A tracking accuracy model based on area-sum principle was also presented through analyzing the localization accuracy of triangulation.Then,the two models mentioned above were combined to establish dynamic cluster member selection model for MTT where a comprehensive performance index function was designed to guide the CM node selection.This selection was fulfilled using genetic algorithm.Simulation results show that this method keeps both energy efficiency and tracking quality in optimal state,and also indicate the validity of genetic algorithm in implementing CM node selection.     

气溶胶和氡浓度变化对氡子体影响的探讨

为了得到气溶胶变化后对氡子体产生的影响,实验通过气溶胶粒径谱仪SMPS测试氡室内不同浓度气溶胶,分析气溶胶的变化情况,根据AlphaGUARD测氡仪以及AlphaPM子体仪测试变化的氡浓度不同气溶胶下子体变化情况。实验结果表明：在两个NaCl浓度的气溶胶条件下,气溶胶的总量随着气溶胶发生器中的NaCl浓度的增大而变大,由于氡子体结合态随气溶胶浓度改变,氡子体浓度也随气溶胶浓度的增大而增大。并且在相同气溶胶浓度情况下,氡子体的浓度随着氡浓度的增大而增大。     

基于流固耦合的闸板防喷器建模及有限元分析

为了更加准确地分析流体对闸板剪切力的影响规律,需要对闸板防喷器剪切钻杆进行流固耦合分析。以钻杆窜动和扭转2种动态工况为例,利用SolidWorks建立闸板防喷器三维模型,并对防喷器内部流体域进行有限元建模,输出到ANSYS Fluent进行有限元分析。结果表明:在闸板剪切钻杆过程中,流体达到稳态后,在钻杆窜动工况下,流体力随钻杆受载荷力增大而减小; 在钻杆扭转工况下,流体力随钻杆扭转角度而变化,在扭转90°时流体力最大。研究结果可为防喷器剪切闸板的剪切能力分析及结构设计提供参考。     

Synthesis and characterization of eugenol-based silicone modified waterborne polyurethane with excellent properties

A eugenol-based silicone-containing monomer 4,4′-(1,1,3,3-tetramethyldisiloxane-1,3-dipropyl)bis-2-methoxyphenol(EUSi) was synthesized from eugenol and 1,1,3,3-tetramethyldisiloxane via the hydrosilylation reaction. And waterborne polyurethane (WPU) with excellent properties was obtained by using EUSi as a type of diol chain extender. The unique combination of rigidity and flexibility in the chemical structure of EUSi greatly facilitated the mechanical properties, thermal properties, and water resistance of WPU. With only a 3% dosage of EUSi, the maximum tensile strength was increased from 6.2 to 22.4 MPa, while the water absorption was decreased from 31.3% to a surprisingly 7.6%. Our work provides a new convenient strategy for the preparation of organosilicon-modified WPU with improved performance.     

Moire Patterns of θ''''Precipitates in Al-Cu Alloy

A θ＇precipitate in an Al-Cu alloy was imaged.Its Moire patterns shown by TEM were discussed.     

Dislocation Structures in a BulkPb－doped Bi－SrCa－Cu－O High Temperature Superconductor

ＤｉｓｌｏｃａｔｉｏｎＳｔｒｕｃｔｕｒｅｓｉｎａＢｕｌｋＰｂ－ｄｏｐｅｄＢｉ－ＳｒＣａ－Ｃｕ－ＯＨｉｇｈＴｅｍｐｅｒａｔｕｒｅＳｕｐｅｒｃｏｎｄｕｃｔｏｒＳｈａＷｅｉ（沙维）（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓ，ＩｍｐｅｒｉａｌＣｏｌｌｅｇｅ...