浅谈水利工程质量的宏观控制

本文从政府、建设单位、施工单位三方面对如何搞好水利工程质量进行分析,并提出如何提高工程质量问题。     

沼气脱硫技术研究

本文综述了近年研究人员在开发沼气脱硫工艺方面所做的工作,包括现代与传统的脱硫技术工艺.探讨了物理、化学和生物脱硫技术对沼气脱硫工艺的影响因素.     

液氮制冷低气压试验箱的仿真设计

在采用液氮制冷的低气压试验箱的设计中,用常规工程设计方法计算的降温过程冷负荷过大,从而导致真空系统设计容量过大。本文采用分布参数模型对试验箱低气压条件下降温过程的冷负荷进行了精确仿真模拟,以此作为真空系统容量设计的基础,减小了设计规模,取得了良好的效果。     

杭-宁输气管道工程定向钻穿越设计浅析

杭州-宁波天然气输气管道工程（简称杭-宁输气管道工程）是浙江省天然气长输管网主干线之一，根据工程河流穿越众多、渠塘穿越频繁的特点，对杭-宁输气管道工程水域穿越的特点和穿越方式作了总结；重点分析了水域定向钻穿越设计及需要注意的问题，为今后浙江省天然气管网建设的水域穿越设计作了探讨。     

基于本地缓存的弹性分组环保护机制

本文提出一种基于本地缓存的弹性分组环保护倒换机制(WrapProtectionBasedOnLocalBuffers,简称WP-LB)。其主要思想是当环路上任何位于源节点和故障区域之间的中间节点接收到含有故障信息的控制信令后,就不再向下游转发数据分组,而是在本地缓存这些数据。等到保护通路建立好之后,再把缓存的数据分组经过保护通路发送给目的节点。分析计算表明,与原有的保护倒换(WrapProtection,简称WP)机制相比,WP-LB机制不仅提高带宽利用率,减少平均时延,并且还能避免数据包的丢失和失序。     

Photoreactivation of Escherichia coli following medium-pressure ultraviolet disinfection and its control using chloramination.

Ultraviolet (UV) disinfection is becoming increasingly popular as an alternative disinfection technology to chlorination in recent years. In this study, we investigated the photoreactivation of Escherichia coli following medium-pressure (MP) UV disinfection of synthetic water by a bench-scale collimated beam apparatus. The UV doses ranged from 1.6 -19.7 mWs/cm2 and photoreactivation was investigated for 6 hours under fluorescent light. In addition, chloramination was applied after UV disinfection to investigate its ability to control photoreactivation. It was found that photoreactivation occurred for all UV doses tested and the increase in bacteria numbers ranged from 0.04 to 1.35 log10. However, the degree of photoreactivation decreased with increased UV doses. Chloramination experiments revealed that the addition of 0.5 mg/l of monochloramine resulted in suppression of photoreactivation for 1 hour only. An increased monochloramine dose of 1 mg/l was found to prevent photoreactivation for the entire duration of the experiment. The results of this study have shown that photoreactivation occurs even after MP UV disinfection, although it is of a lesser extent at higher UV doses. This study has also established that secondary chloramination can effectively suppress and eliminate photoreactivation with a chloramine dose of 1 mg/l.     

基于LabWindows/CVI的某型飞机FBW飞行试验台设计与实现

主要阐述了某型飞机EBW飞行试验台的LabWindows／CVI实现。在分析EBW组成及信号交联关系的基础上，设计了PCI总线结构的系统硬件；提出了测试库与测试引擎相结合的编程方法，并着重阐述了测试引擎的实现方法。     

Wiener models of direction-dependent dynamic systems

Analysis of systems with direction-dependent dynamics is currently limited to cases in which the dynamics in the two directions of the output are first order; results for such systems have been published for both pseudo-random maximum-length binary (MLB) and inverse-repeat maximum-length binary (IR-MLB) inputs. These relatively limited analytical results make it useful to examine alternative ways of modelling such systems and in this paper, Wiener models are considered for this purpose. Methods for optimising the Wiener model parameters by matching the system and model cross-correlation functions, outputs, and discrete Fourier transforms of the outputs are considered, and the results are compared. These methods are also applied to a first-order direction-dependent system with a maximum-length ternary (MLT) input, for which no analytical results are currently available, and to a second-order system with an IR-MLB input.     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

在高温,高压,氢环境中21／4Cr—1Mo钢及其焊接接头KIH的测试

采用恒位移试验方法，在高温、高压、氢环境中用ＷＯＬ试样测试了２１４Ｃｒ－１Ｍｏ钢及其焊接接头的应力腐蚀门限应力强度因子ＫＩＨ。试验结果表明：采用恒位移试验方法测试高温、高压、氢环境中２１４Ｃｒ－１Ｍｏ钢及其焊接接头的ＫＩＨ是可行的。