Modulation and Equalisation Considerations for High Performance Radio LANs

The European Telecommunications Standards Institute (ETSI) has recently defined a European standard for a high performance radio LAN (known as HIPERLAN). To operate as wired LAN replacements, these systems will operate at 5.2 GHz and support instantaneous bit rates of just under 24 Mb/s. To counteract the time dispersive nature of the indoor radio channel, the use of adaptive equalisation is suggested. In this paper a number of possible modulation and equalisation techniques are presented and, in particular, the Bit Error Rate (BER) performance of quasi-coherent GMSK combined with Decision Feedback Equalisation is explored through computer simulation. The trade off between symbol spaced and fractionally spaced equalisation is considered together with the importance of feedfoward and feedback synchronisation to the channel's power delay profile. The paper also includes a comparison of the RLS and LMS based training algorithms and compares the modem developed under the ESPRIT III LAURA project with that specified in HIPERLAN.The application of dual antenna diversity is investigated and its impact on the number of received error free data packets obtained as a function of signal leval and rms delay spread. The use of such diversity is shown to greatly improve the BER performance of a HIPERLAN modem. The problem of frequency offset is considered and modifications are proposed to the HIPERLAN frame structure to improve the receiver's tolerance to such errors. Important practical issues such as frame and symbol synchronisation, frequency offset correction and hardware implementation are discussed from both the LAURA and HIPERLAN viewpoint.     

一种多晶硅高温压力传感器

制作压力传感器时，在二氧化硅层上淀积多晶硅膜，既可利用优良的机械特性，又可保证压敏电阻与衬底间具有良好的绝缘性，由此可大大提高器件的温度特性。介绍了一种多晶硅压力传感器的原理和设计。实验结果表明，这类传感器具有灵敏度好，精度高等特点，电路工作范围为０－２５０℃，且具有良好的温度稳定性。     

参数化图形库技术

本文论述了参数化图形库的实现原理，建立了以尺寸叠加算法为基础的参数化图形库开发工具，利用这种开发工具建立的图形数据可以由数据库管理，方便有效。     

CAD-oriented formulas for the quasi-tem parameters of shielded and semi-enclosed (coupled) coplanar waveguides

On the magnetic-wall approximation for their slots, shielded coplanar waveguides (SCPWs) and semienclosed CPWs (SECPWs) are analyzed through an intensive use of elliptic function transformation. CAD-oriented formulas for the quasi-TEM parameters of SCPWs and SECPWs, including their coupled versions, are derived. The comparison of the results calculated here with previous ones show 2% accuracy for formulas in the practical situation where the slots are not too wide, e.g., s / (s + 2w) ≥ 0.2 for an SCPW. © 1994 John Wiley & Sons, Inc.     

超声波车辆车轴探头的研制与应用

提出了一种用于检测在役车辆车轴产生疲劳裂纹的超声波方法,设计了中心孔探头与斜角探头一起,完成了对车辆车轴的关键区域探伤。     

工业过程随机稳态优化控制算法的鲁棒性分析

本文给出了一种随机稳态优化算法的灵敏度分析，讨论算法解对参数变化的关系。这些参数代表系统结构参数或噪声向量的某些数字特征．     

940nm高功率激光二极管及线阵

设计并制作出了940 nm无铝有源区高功率激光二极管和激光条.通过MOCVD法生长出应变量子阱材料,器件显示出极好的性能,100μm条宽的激光二极管最大输出功率达800mW(室温),填充因子为17%的激光二极管条发射功率达32 W.     

微型无阀泵参数化结构设计及测试

 从理论计算和试验两方面研究了用于微流控化学分析芯片的微型无阀泵流动特性，初步建立了微型无阀泵流道结构的数学模型，重点讨论了结构参数的选取原则及相应的流动阻尼系数的计算方法． 通过试验验证了数值计算的可靠性，为微型无阀泵参数化设计及优化提供了理论依据及经验曲线．     

光纤检漏系统

本文介绍一种新型的光纤检漏系统,通过对待测件内气体状态分析,确定采用比较法充压检漏技术和先进的光纤技术,研制成既具有高检测灵敏度又稳定可靠的检漏系统。该系统已成功地用于工业生产中,对水库大坝仪器实现了在线充压检漏,保证产品质量。     

预处理工艺对硬质合金与金刚石膜间粘结力的影响

在两种经不同预处理的硬质合金YG8基底上，采用微波等离子体化学气相沉积法，在微波功率2kW，压强4.0kPa和6.5kPa，CH4和H2流量分别为1.6cm/s和100.0cm/s的条件下生长金刚石薄膜。利用X射线衍射检测了金刚石薄膜是否存在，用拉曼光谱分析了薄膜的质量，用金相显微镜观察了薄膜的洛氏硬度压痕，标定并比较了不同预处理工艺膜与基底的结合力。实验结果表明，不同的预处理方法对于粘结力的影响不大，最主要的因素是钴含量的多少。