Analysis of thermal instability in multi-finger power AlGaAs/GaAsHBT's

A new theory is developed in this paper to explain the collapse of current gain in multi-finger power AlGaAs/GaAs Heterojunction Bipolar Transistors (HBT's). The reasons behind this unwanted phenomenon are fully clarified using a simple model to investigate the thermo-electrical interaction between the fingers. The existence of multi-value equilibrium points in model's constitutive equations is shown to be the necessary condition for the collapse of current gain to appear. For a N-finger device, N different patterns of collapse exist. The criterion to select the global stable pattern is given. The method has been used to predict the collapse in AlGaAs/GaAs HBT's and the agreement is excellent. The method also predicts that the collapse can happen far earlier than is normally expected in multi-finger high-power devices. The influence of ballasting resistance and thermal resistance is also investigated     

Comparison of Markov model and fault tree approach in determining initiating event frequency for systems with two train configurations

This study explores the use of Markov models in some areas of systems analysis in which time evolution of the system may be a significant factor in influencing the system reliability or availability. Comparisons are made between the Markov models and the time-averaged fault tree models for determining support system failure initiating event frequency in a nuclear power plant, for both power and shutdown conditions. Factors affecting consistency between the fault tree approach and the Markov model approach are studied for systems with common two train configurations. A correlation is developed to estimate the ratio between initiator frequencies through both approaches for a two parallel component system. Insights are developed as to when time averaged and simplified fault tree models support a good approximation to the more rigorous time-dependent Markov models.     

对洪水分级的浅见

洪水的等级划分应考虑流量、水位、防洪能力及灾害等因素,综合这些因素把洪水分成5个等级。1、2级洪水,洪水流量小,水位低,基本无灾;3级洪水,洪水流量较大或水位较高,有一定灾害;4级洪水,为大洪水或高水位,有较大灾害;5级洪水,为特大洪水或高水位,灾情严重。     

新的钢铁工业结构与铁矿资源条件的能源优化模型研究

发展我国钢铁工业，资源和能源已经成为两个重要的制约因素。到本世纪末，我国钢产量达1．2亿t，所需资源必须有部分进口。本文论述了新的钢铁企业模型结构及采用部分进口废钢和铁矿石的能源优化问题。     

相转移催化合成芳基烷基醚

报道了以四丁基溴化铵为相转移催化剂，简便地合成了１０个芳基烷基醚，反应几乎是定量地快速进行。     

5%甲·辛颗粒剂中甲拌磷和辛硫磷含量的测定

本文采用萃取、薄层层析等分离方法，选择合适的萃取剂、展开剂，经分离后，分别刮下甲拌磷和辛硫磷谱带，采用气相色谱法测定甲拌磷含量；采用液相色谱法测定辛硫磷含量。     

硝胺发射药燃速压力指数对内弹道性能的影响

通过将硝胺发射药实际的燃速方程,引入一维定常流、相对变量无量纲的经典内弹道计算程序,计算了RB型硝胺发射药在不同的压力指数及高压力指数区间下,弧厚、药量和挤进压力等起始条件变化对弹道性能的影响.结果表明,高压力指数能增加射击起始条件等参量对弹道性能的敏感性,而且随着高压力指数的增加及其区间的扩大而加剧.但也发现,在弹道性能上,密度为1.620g/cm~3的RB型硝胺发射药的燃速压力指数,对射击起始条件等参量的敏感性与三基药相接近,并未发现明显的弹道不一致性或安全性问题的征候.     

钢管内径光电检测装置

介绍了一种检测细长钢管内径的光电检测装置。该装置利用线阵ＣＣＤ作传感器，采用８０３１单片机作为主控制。     

Air bearing design, optimization, stability analysis andverification for sub-25 nm flying

Three sub-25 nm fly height sliders are presented for near contact recording. The designs are geared towards the goal of achieving 10 Gb/in ² areal density. The optimization procedure presented shows promise for facilitating achievement of this goal. The dynamic simulations show the stability of these designs when disturbed from their steady state conditions     

软包装用凹印油墨

<正>我国软包装规模化生产自上世纪80年代开始,经20多年来的发展,软包装行业己具有相当规模并有一定的技术水平。至2004年不完全统计,我国己拥有引进生产线700多条,拥有国产设备的中、小型生产厂家不少于8000家。全国每年耗用塑料薄膜基材400多万吨(不包括铝箔等基材),耗用塑料包装油墨8～9万吨,胶粘剂8万吨左右,塑料软包装行业己成为包装行业一支高