Measurement and modeling of the sidewall threshold voltage ofmesa-isolated SOI MOSFETs

Five-terminal silicon-on-insulator (SOI) MOSFETs have been characterized to determine the threshold voltage at the front, back, and sidewall as a function of the body bias. The threshold voltage shift with the body bias at the front and back interfaces can be explained by the standard bulk body effect equation. However, the threshold voltage shift at the sidewall is smaller than predicted by this equation and saturates at large body biases. This anomalous behavior is explained by two-dimensional charge sharing between the sidewall and the front and back interfaces. An analytical model that accounts for this charge sharing by a simple trapezoidal approximation of the depletion regions and correctly predicts the sidewall threshold voltage shift and its saturation is discussed. The model makes it possible to measure the sidewall threshold even when it is larger than the front threshold voltage     

情浸丹青写名园——小谈郝永明的古建园林绘画艺术

郝永明古建园林绘画作品另辟蹊径，难能可贵。郝永明的画，不仅给我国美术宝库增加了一份积累，也给古建园林艺术增添了珍贵的资料。     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

混凝土构件承载力计算的Excel实现

运用Excel软件,高效解决了混凝土结构计算中较复杂的圆形截面偏压构件的承载力计算问题。该编程计算方法同样适用于土力学、水力学、钢结构等领域。对于解决工程中的各种学科计算问题有着广阔的应用前景。     

60m高度处单片露天超高混凝土悬臂墙的设计与施工

通过采用竖向预应力技术 ,解决了 60m高度处单片 8m高悬臂钢筋混凝土墙根部裂缝宽度超过规范限值的问题 ;采用将预应力钢绞线顶端锚固于墙高中段等结构和施工措施 ,控制墙体长细比不超过 3 0 ,减少了由于长细比过大对墙体承载力的不利影响     

新浦江城规划设计优劣分析

文章通过对上海“新浦江城”首期项目的介绍，分析了意大利设计在该项目应用中的独特之处，同时指出了存在的一些问题。指出国外设计应结合中国国情，符合社会发展的需要。     

乳化酸+硝酸粉末酸压技术在泥灰岩储层中的应用

华北油田泥灰岩储层曾进行多种类型的酸化增产改造工艺,但均未取得理想效果。经过对泥灰岩地层进行大量的油藏地质、室内试验研究以及工程、地质技术人员的反复论证,优选出一种切实可行的酸压改造措施——前置液+高温乳化酸+固体硝酸酸压工艺。经过现场应用,收到了较好的增产效果,为华北油田泥灰岩储层改造措施找到了突破口。     

花艺教室：荆丛亦风流

运动的环热烈的爱//圆点示爱//纯洁爱情//心心相印//透过玻璃的美     

柳钢100t转炉冶炼工艺优化实践

通过分析100t转炉冶炼工艺中存在的问题，对冶炼工艺进行优化，提高转炉过程控制能力和一倒炉命中率，结果表明：过程喷溅可降低至9％，冶炼终点命中率提高到63％ 以上。[第一段]     

焦炭反应性试验影响因素分析

针对梅山自产焦炭，利用梅山焦炭反应性试验设备，通过改变焦炭块数、CO2流量和温度等控制参数，讨论了这些参数对焦炭反应性和反应后强度检测值的影响，以及保证测定可靠性应采取的控制措施。