MICROSTRUCTURES AND TEXTURES IN COLD-ROLLED ALUMINIUM STRIP

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＡＮＤＴＥＸＴＵＲＥＳＩＮＣＯＬＤＲＯＬＬＥＤＡＬＵＭＩＮＩＵＭＳＴＲＩＰ①ＮｉｅＺｕｏｒｅｎ，ＺｈａｎｇＸｉｎｍｉｎｇ，ＹｉｎＺｈｉｍｉｎＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｒｉ...     

Conductivity enhancement in transparetn ZnO films via Al-dopping produced by CW-CO2 laser-induced evaporation

Highly conductive transparent aluminium-doped ZnO (ZnO:A1) films were successfully deposited by CW-CO₂ laser-induced evaporation. Optimisation of evaporation parameters was based on laser power, substrate temperature, O₂ partial pressure in the vacuum chamber and amount of Al in the ZnO source pellet. ZnO:A1 films with an electrical resistivity as low as 6.6 × 10⁻²Ω·cm and an optical transmission of 80% at 500nm were obtained at laser power of 15 W, substrate temperature of about 200°C, O₂ partial pressure of 6—7 × 10⁻⁴ Torr and 5wt.% Al. Conductivity of ZnO films can be increased one order via Al-doping in ZnO films. The films obtained by laser-induced evaporation have compared quite favorably with the high quality films obtained by sputtering.     

稀土含量对喷熔层组织及耐蚀性的影响

本文通过在镍基自熔合金粉末中加入不同含量的稀土，研究了稀土含量对喷熔层组织及耐蚀性的影响规律及其作用机制。结果表明，在喷熔材料中加入适量稀土，可使喷熔层组织细化、晶界净化，从而使腐蚀过程中的表面活性点减少，耐蚀性提高。     

锻压机械打击力测量误差的加速度补偿

提出了锻压机械打击力测量中存在的问题，介绍了常用的补偿法，并通过实验验证了加速度补偿法是消除锻压机械打击力测量误差的有效途径。     

铂铑包覆钼合金搅拌器的研制

介绍了铂铑包覆钼合金搅拌器的结构与技术要求,以及搅拌器的制作与使用效果。研制结果表明,国产搅拌器达到了日本同类产品的水平。     

实施国库集中支付制度存在问题与建议

按照财政部国库管理制度改革统一要求，鄂尔多斯市开展了国库集中支付试点工作。运行过程中，一些阻碍改革运行的问题引起笔者的思考。文中介绍了笔者当地实施改革试点存在的突出问题，如电脑网络不完善情况下国库集中支付操作难以运行、预算编制不能满足国库支付的基本要求、国库支付系统与银行业务收支不兼容、财政收支进度不一致、财政财力供给不足给集中支付造成瓶颈制约、政策法规出台滞后、改革现行的财政支出管理体系阻力很大、政府采购项目及资金审批程序不规范等。笔者并结合问题大胆提出了自己对推进的改革的措施和建议，即加强组织领导、强化理论学习借鉴、彻底清理银行账户、加强网络建设、制定切实可行的改革方案及配套办法、加快行政审批服务制度的改革、改革传统发放工资制度、进一步规范政府采购制度。     

新型节能玻璃钢门窗的研究

本文主要围绕节能主题，从能耗方式、性能指标、结构形式、制作安装等方面论述了玻璃钢门窗在不同气候地区、不同环境和不同领域中的开发和应用。     

霍尔传感器在气动健身器材中的应用

为了能更好地掌握运动者的运动力度,尽可能地减小运动中由于运动过剧造成的损伤,设计了一种气动健身器材,通过实际的气缸压力与霍尔传感器检测出气缸活塞的位移来计算器材使用者所承受的拉力,并结合记录气缸活塞的运动次数来计算运动者消耗的热量,更直观地显示出运动者的运动情况。经过测试,霍尔传感器反应灵敏,检测结果准确,系统稳定性良好,有较高的实用性。     

Efficient multilevel image segmentation through fuzzy entropy maximization and graph cut optimization

The fuzzy c-partition entropy has been widely adopted as a global optimization technique for finding the optimized thresholds for multilevel image segmentation. However, it involves expensive computation as the number of thresholds increases and often yields noisy segmentation results since spatial coherence is not enforced. In this paper, an iterative calculation scheme is presented for reducing redundant computations in entropy evaluation. The efficiency of threshold selection is further improved through utilizing the artificial bee colony algorithm as the optimization technique. Finally, instead of performing thresholding for each pixel independently, the presented algorithm oversegments the input image into small regions and uses the probabilities of fuzzy events to define the costs of different label assignments for each region. The final segmentation results is computed using graph cut, which produces smooth segmentation results. The experimental results demonstrate the presented iterative calculation scheme can greatly reduce the running time and keep it stable as the number of required thresholds increases. Quantitative evaluations over 20 classic images also show that the presented algorithm outperforms existing multilevel segmentation approaches.     

Image super-resolution based on multi-space sparse representation

Sparse representation provides a new method of generating a super-resolution image from a single low resolution input image. An over-complete base for sparse representation is an essential part of such methods. However, discovering the over-complete base with efficient representation from a large amount of image patches is a difficult problem. In this paper, we propose a super-resolution construction based on multi-space sparse representation to efficiently solve the problem. In the representation, image patches are decomposed into a structure component and a texture component represented by the over-complete bases of their own spaces so that their high-level features can be captured by the bases. In the implementation, a prior knowledge about low resolution images generation is combined to the typical base construction for high construction quality. Experiment results demonstrate that the proposed method significantly improves the PSNR, SSIM and visual quality of reconstructed high-resolution image.