Principal component analysis (PCA) was extended to minimize the noise effect in digital image correlation (DIC) measurement under a high-temperature atmosphere environment. First, the principle of PCA was introduced, and the singular vectors and singular values for each component of the displacement fields from DIC were obtained. Then, the simulated high-temperature speckle images were developed to investigate the influences of noise on the DIC method under a high-temperature environment. Finally, the displacement fields of several special conditions were extracted from the simulated speckle images and experimental images; the effects of noise on the PCA were also analyzed. 相似文献
In this paper, single crystalline copper nanowires (CuNWs) have been electrochemically grown through anodic aluminum oxide template. The environmental stability of the as‐obtained CuNWs in both 40% relative humidity (RH) atmosphere and 0.1 m NaOH aqueous solution has been subsequently studied. In 40% RH atmosphere, a uniform compact Cu2O layer is formed as a function of exposure time following the logarithmic law and epitaxially covers the CuNW surfaces. It is also found that the oxide layers on CuNWs are sequentially grown when subjected to the cyclic voltammetry measurement in 0.1 m NaOH solution. An epitaxially homogeneous Cu2O layer is initially formed over the surface of the CuNW substrates by solid‐state reaction (SSR). Subsequently, the conversion of Cu2O into epitaxial CuO based on the SSR takes place with the increase of applied potential. This CuO layer is partially dissolved in the solution forming Cu(OH)2, which then redeposited on the CuNW surfaces (i.e., dissolution‐redeposition (DR) process) giving rise to a mixed polycrystalline CuO/Cu(OH)2 layer. The further increase of applied potential allows the complete oxidation of Cu2O into CuO to form a dual‐layer structure (i.e., CuO inner layer and Cu(OH)2 outer layer) with random orientations through an enhanced DR process. 相似文献
A novel Ag/AgCl/chitosan composite photocatalyst was successfully prepared by a simple one-step method. During this progress, environmentally benign chitosan not only served as reductant to reduce Ag+ to Ag0 species, but also acted as supporter for Ag/AgCl nanoparticles. XRD, SEM, EDX, UV-vis DRS and XPS were employed to characterize the as-prepared simples. SEM images of Ag/AgCl/chitosan composites revealed that Ag/AgCl nanoparticles were successfully loaded onto chitosan without obvious aggregation. All Ag/AgCl/chitosan composites exhibited efficient photocatalytic activity for the degradation of rhodamine B (RhB) under visible-light irradiation. The result of photocatalytic degradation experiment indicated that 20% of the mass ratio of AgCl to chitosan was the optimum, and after 40 min photocatalytic reaction, the degradation rate reached about 96%. 相似文献
A facile one-step approach to synthesize various phase-separated porous, raspberry-like, flower-like, core–shell and anomalous nanoparticles and nanocapsules via 1,1-diphenylethene (DPE) controlled soap-free emulsion copolymerization of styrene (S) with glycidyl methacrylate (GMA), or acrylic acid (AA) is reported. By regulating the mass ratio of S/GMA, transparent polymer solution, porous and anomalous P(S-GMA) particles could be produced. The P(S-GMA) particles turn from flower-like to raspberry-like and then to anomalous structures with smooth surface as the increase of divinylbenzene (DVB) crosslinker. Transparent polymer solution, nanocapsules and core–shell P(S-AA) particles could be obtained by altering the mole ratio of S/AA; anomalous and raspberry-like P(S-AA) particles are produced by adding DVB. The unpolymerized S resulted from the low monomer conversion in the presence of DPE aggregates to form nano-sized droplets, and migrates towards the external surfaces of the GMA-enriched P(S-GMA) particles and the internal bulk of the AA-enriched P(S-AA) particles. The nano-sized droplets function as in situ porogen, porous P(S-GMA) particles and P(S-AA) nanocapsules are produced when the porogen is removed. This novel, facile, one-step method with excellent controllability and reproducibility will inspire new strategies for creating hierarchical phase-separated polymeric particles with various structures by simply altering the species and ratio of comonomers. The drug loading and release experiments on the porous particles and nanocapsules demonstrate that the release of doxorubicin hydrochloride is very slow in weakly basic environment and quick in weakly acidic environment, which enables the porous particles and nanocapsules with promising potential in drug delivery applications.