计算机网络安全体系的研究

首先,结合国内外同行的最新研究成果,我们将对网络系统中的不安全因素加以分析,并形式化地给出一个安全计算机网络系统的定义;然后将从理论上阐述一个基于OSI-RM体系的网络安全保护体系的模型,并讨论该安全保护体系在现有系统中的作用。     

用添加剂改善柴油的颜色稳定性

利用实验室筛选出的一种柴油安定性改进剂改善柴油的颜色稳定性。贮存实验表明：成品柴油(催化裂化柴油组分占30％)中加入该剂300～400μg/g，可改善比色0．5-1．5个号，同时可抑制柴油氧化沉渣的生成，改善柴油的氧化安定性和颜色稳定性。     

国家粮储库屋面防水APP卷材施工技术

针对国家粮食储备库的特点，就屋面防水APP卷材热熔法施工的施工准备及工艺流程进行了介绍，提出了具体的施工技术要点及质量通病的防治措施，取得了良好的施工效果。     

油润滑下Al/MoSi2材料的摩擦学特性

运用M-200型磨损试验机测定了油润滑下Al/MoSi2材料的摩擦磨损性能，采用SEM和X射线观察与分析了摩擦副表面的形貌和相组成，探讨了磨损机制。结果表明：采用20#机油润滑可有效地提高Al/MoSi2材料的摩察磨损综合性能；与干摩擦状态相比，其摩擦系统和磨损率分别下降了40%和60%；油润滑时，Al/MoSi2材料的磨损机制主要表现为疲劳点蚀和磨粒磨损。     

Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

传爆管用聚奥99炸药研究

介绍了具有高煤轰感度和耐热特性的聚奥99炸药的配方、制备工艺、性能以及装入传爆管后产品的性能和应用状况。     

SL1型翻斗式遥测雨量计的维修和养护

仪器缺少维修及养护直接影响测报工作的完成，以 Ｓ Ｌ１ 型翻斗式遥测雨量计为例，从仪器的结构原理出发，介绍仪器的维修和养护方法，并简单论述仪器维护的重要性，提出一些搞好仪器维护的建议。     

On the algebraic formulation of certain geometry statements and mechanical geometry theorem proving

In this paper we analyze the algebraic formulations of certain geometry statements appearing in recent literature related to mechanical geometry theorem proving and give several examples to show that one of these formulations can cause serious problems. We clarify a formulation which is essentially due to W. T. Wu and, in our opinion, is the most satisfactory.This author was supported by NSF Grants DCR-8503498 and CCR-8702108.     

防水粉憎水膜形成机理及稳定性的研究

通过对防水粉憎水膜形成途径的探索，提出了憎水膜形成过程的基本假设，利用微观测试方法证实了憎水膜层的存在．试验并研究了防水粉长期稳定性的诸多问题。     

不同品位高钛渣对沸腾氯化工艺的影响

分别以94％品位高钛渣和90％品位高钛渣为原料，采用沸腾氯化工艺制备粗TiCl4，分析了两种品位高钛渣对沸腾氯化工艺的影响。结果表明：94％品位高钛渣由于其活性低而对沸腾氯化工艺的影响较大。