Role of hydrogen in the surface passivation of crystalline silicon by sputtered aluminum oxide

Aluminum oxide films can provide excellent surface passivation on both p‐type and n‐type surfaces of silicon wafers and solar cells. Even though radio frequency magnetron sputtering is capable of depositing aluminum oxide with concentrations of negative charges comparable to some of the other deposition methods, the surface passivation has not been as good. In this paper, we compare the composition and bonding of aluminum oxide deposited by thermal atomic layer deposition and sputtering, and find that the interfacial silicon oxide layer and hydrogen concentration can explain the differences in the surface passivation. Copyright © 2010 John Wiley & Sons, Ltd.     

Uncertainty of the spectral mismatch correction factor in STC measurements on photovoltaic devices

Valuation of photovoltaic devices depends strongly on the measured power output of the device. This quantity is usually determined under artificial sunlight in production line measurement systems or industrial or research test labs. A practical calibration chain is realized essentially with measurements at solar simulators. The measurement conditions are defined in the IEC 60904 series of standards. An important part of the standard testing conditions is the definition of a specific spectral distribution of the sunlight (AM1.5 global). The inevitable deviations of the spectrum of artificial light sources from the standard spectrum have to be taken into account by a spectral mismatch factor. The uncertainty of this crucial correction is spectrally dependent, in most cases unknown and complex and inconvenient to evaluate. In this article a randomizing method is proposed which allows one to calculate the uncertainty of the mismatch factor from the uncertainties of the input parameters determined with high spectral resolution. Based on a range of different spectral responses of solar cells on the one hand and variations of the solar simulator spectral distribution on the other, we are able to generalize the results to a broad set of measurement configurations. A sensitivity analysis reveals the crucial wavelength regions and thus allows the systematic optimization of simulator spectra and selection of reference cells. Copyright © 2010 John Wiley & Sons, Ltd.     

Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

Near‐Infrared Light‐Emitting Diodes (LEDs) Based on Poly(phenylene)/Yb‐tris(β‐Diketonate) Complexes

Near‐infrared‐emitting electroluminescent (EL) devices using blue‐light‐emitting polymers blended with the Yb complexes Yb(DBM)₃phen (DBM = dibenzoylmethane), Yb(DNM)₃phen (DNM = dinaphthoylmethane), and Yb(TPP)L(OEt) (L(OEt) = [(C₅H₅)Co{P(O)Et₂}₃]^–) have been studied. EL devices composed of Yb(DNM)₃phen blended with PPP‐OR11 showed enhanced near‐IR output at 977 nm when compared to those fabricated with Yb(DBM)₃phen/PPP‐OR11 blends. The maximum near‐IR external efficiencies of the devices with Yb(DBM)₃phen and Yb(DNM)₃phen are, respectively, 7 × 10^–5 (at 6 V and at 0.81 mA mm^–2) and 4 × 10^–4 (at 7 V, and 0.74 mA mm^–2). The optimal blend composition for EL device performance consisted of PPP‐OR11 blended with 10–20 mol‐% Yb(DNM)₃phen. A device fabricated using Yb‐(TPP)L(OEt)/PPP‐OR11 showed significantly enhanced near‐IR output efficiency, and future efforts will focus on devices fabricated using porphyrin‐based materials.     

Performance Analysis of a Discrete‐Time Two‐Phase Queueing System

This paper introduces the modeling and analysis of a discrete‐time, two‐phase queueing system for both exhaustive batch service and gated batch service. Packets arrive at the system according to a Bernoulli process and receive batch service in the first phase and individual services in the second phase. We derive the probability generating function (PGF) of the system size and show that it is decomposed into two PGFs, one of which is the PGF of the system size in the standard discrete‐time Geo/G/1 queue without vacations. We also present the PGF of the sojourn time. Based on these PGFs, we present useful performance measures, such as the mean number of packets in the system and the mean sojourn time of a packet.     

A Fully Synthesizable Bluetooth Baseband Module for a System‐on‐a‐Chip

Bluetooth is a specification for short‐range wireless communication using the 2.4 GHz ISM band. It emphasizes low complexity, low power, and low cost. This paper describes an area‐efficient digital baseband module for wireless technology. For area‐efficiency, we carefully consider hardware and software partitioning. We implement complex control tasks of the Bluetooth baseband layer protocols in software running on an embedded microcontroller. Hardware‐efficient functions, such as low‐level bitstream link control; host controller interfaces (HCIs), such as universal asynchronous receiver transmitter (UART) and universal serial bus (USB) interfaces; and audio Codec are performed by dedicated hardware blocks. Furthermore, we eliminate FIFOs for data buffering between hardware functional units. The design is done using fully synthesizable Verilog HDL to enhance the portability between process technologies so that our module can be easily integrated as an intellectual property core on system‐on‐a‐chip (SoC) ASICs. A field programmable gate array (FPGA) prototype of this module was tested for functional verification and realtime operation of file and bitstream transfers between PCs. The module was fabricated in a 0.25‐µm CMOS technology, the core size of which was only 2.79 mm×2.80 mm.     

Home photo content modeling for personalized event-based retrieval

Rapid advances in sensor, storage, processor, and communication technologies let consumers store large digital photo collections. Consumers need effective tools to organize and access photos in a semantically meaningful way. We address the semantic gap between feature-based indexes computed automatically and human query and retrieval preferences.     

浅析电信运营商流量产品合作

3G/4G网络和移动互联网的普及使得流量需求不断扩大,流量经营的重要性不断凸显。通过与互联网厂商合作,探索共赢的流量产品模式。结合运营商特点,阐述了流量产品的合作策略,分析了实现过程中的关键技术,并通过实际案例说明了流量产品合作的运营效果。     

论电网工程造价控制的问题与对策

我国的电网工程造价控制经过多年的发展,已经取得了长足的进步,然而还存在一些问题,致使电网工程造价控制水平受到了一定的制约。文中探讨了电网工程造价控制中存在的问题,并提出了一些意见和对策。     

On a MIMO-based open wireless architecture: space-time complementary coding [Accepted from Open Call]

This article proposes a MIMO-based open wireless architecture for next-generation wireless systems. The use of space-time complementary coding in the proposed OWA scheme contributes to a great improvement in system performance due to the joint spatial diversity and multiplexing advantages achieved by the STCC-MIMO scheme. The proposed STCC-MIMO-based OWA scheme offers an unified platform that integrates various attractive features, such as link adaptation, spatial diversity and multiplexing trade-off, and accurate channel estimation. The application of innovative pair-wise complementary codes and offset stacking spread spectrum in the STCC-MIMO scheme helps to boost the overall spectral efficiency due to its near interference-free operation. MIMO systems play an extremely important role in 4G wireless, and therefore it is desirable that the OWA support different MIMO configurations. This article shows that the proposed STCC-MIMO scheme offers great flexibility to implement a MIMO system suitable for different diversity and multiplexing requirements