Continuous measurement of cardiac output by the Fick principle in infants and children: comparison with the thermodilution method

OBJECTIVE: To compare a system that continuously monitors cardiac output by the Fick principle with measurements by the thermodilution technique in pediatric patients. DESIGN: Prospective direct comparison of the above two techniques. SETTING: Pediatric intensive care unit of a university hospital. PATIENTS: 25 infants and children, aged 1 week to 17 years (median 10 months), who had undergone open heart surgery were studied. Only patients without an endotracheal tube leak and without a residual shunt were included. METHODS: The system based on the Fick principle uses measurements of oxygen consumption taken by a metabolic monitor and of arterial and mixed venous oxygen saturation taken by pulse- and fiberoptic oximetry to calculate cardiac output every 20s. INTERVENTIONS: In every patient one pair of measurements was taken. Continuous Fick and thermodilution cardiac output measurements were performed simultaneously, with the examiners remaining ignorant of the results of the other method. RESULTS: Cardiac output measurements ranged from 0.21 to 4.55 l/min. A good correlation coefficient was found: r2 = 0.98; P < 0.001; SEE = 0.41 l/min. The bias is absolute values and in percent of average cardiac output was - 0.05 l/min or - 4.4% with a precision of 0.32 l/min or 21.3% at 2 SD, respectively. The difference was most marked in a neonate with low cardiac output. CONCLUSION: Continuous measurement of cardiac output by the Fick principle offers a convenient method for the hemodynamic monitoring of unstable infants and children.     

X-ray electron spectroscopic investigation of the structure of double lead silicate glasses

The method of x-ray electron spectroscopy is used to investigate lead silicatexPbO(1 -x) · SiO₂ (x - 0.3, 0.4, 0.5, 0.55, 0.667) glasses. The concentration dependences of the spectra of inner Pb4f, Si2p, and Ols levels led to the conclusion that for low contents of PbO, lead is present in the glass in the form of modifying ions, whereas in high concentrations, it plays the role of glass former. Restructuring in the glass occurs for about 50% molar concentration of PbO. The Pb - O bond in the glass is more ionic than in PbO. With an increase in the PbO content in the glass, the Pb - O bond becomes closer to that of lead monoxide, i.e., is more covalent.     

Long-term follow-up of a randomized post-induction therapy trial in acute myelogenous leukemia (a Southeastern Cancer Study Group trial)

A phase III clinical trial was designed to determine if more intensive induction and consolidation therapy for acute myeloblastic leukemia increases the remission rate and prolongs survival. A minor objective was to determine if the use of non-cross resistant drugs was more effective than the same drugs used for induction. Patients with untreated leukemia between the ages of 15 and 50 were given daunorubicin 45 mg/m2 for the first 3 days of a 10-day continuous infusion of cytosine arabinoside, initially at a dose of 2000 mg/m2 but reduced to 100 mg/m2 because of toxicity. Those under 36 achieving a complete remission and with an histocompatible donor were assigned to a transplant arm. The rest were randomized to receive one of three consolidation arms: A, cytosine arabinoside, 200 mg/m2 daily for 7 days and daunorubicin 45 mg/m2 daily for 3 days for three courses; B, one course as in Arm A followed by amsacrine, 120 mg/m2 daily for 5 days followed by a 5-day continuous infusion of azacytidine, 150 mg/m2/day; C, thioguanine and cytosine arabinoside, 100 mg/m2 every 12 h and daunorubicin 10 mg/m2 daily for 5 days for three courses followed by four maintenance courses of cytosine arabinoside, 100 mg/m2 daily for 5 days and daunorubicin, 45 mg/m2 for 2 days every 13 weeks. From 1981 to 1986, 398 eligible patients were enrolled and 219 achieved a complete remission. The initial induction dose of cytosine arabinoside was reduced after five of 29 patients exhibited fatal gastrointestinal toxicity. Only 11 patients were assigned to the transplant arm. There were no significant differences in the consolidation arms. The 5 year disease-free survivals were 38, 31 and 27% in arms A, B, and C respectively. Intensive consolidation therapy with the same or different drugs used in induction was as effective as lower dose consolidation followed by maintenance therapy.     

A two-year measurement of rainfall attenuation of CW microwaves inSingapore

The authors present two-year statistics on the rainfall attenuation of 21.225 GHz vertically polarized CW microwave signals in Singapore. The CCIR recommendation is found to underestimate the microwave specific attenuation (dB/km) per path average rain rate (mm/h) as well as the accumulated time of attenuation exceeding preset levels. A negative exponential raindrop size distribution based on spherical droplets is constructed from the measured data     

Biodegradation of monoaromatic hydrocarbons in aquifer columns amended with hydrogen peroxide and nitrate

The ability of indigenous microorganisms to degrade benzene, toluene, ethylbenzene and xylenes (BTEX) in laboratory scale flow-through aquifer columns was tested separately with hydrogen peroxide (110 mg/l) and nitrate (330 mg/l as NO₃⁻) amendments to air-saturated influent nutrient solution. The continuous removal of individual components from all columns relative to the sterile controls provided evidence for biodegradation. In the presence of hydrogen peroxide, the indigeneous microorganisms degraded benzene and toluene (> 95%), meta- plus para-xylene (80%) and ortho-xylene (70%). Nitrate addition resulted in 90% removal of toluene and 25% removal of ortho-xylene. However, benzene, ethylbenzene, meta- and para-xylene concentrations were not significantly reduced after 42 days of operation. Following this experiment, low dissolved oxygen (< 1 mg/l) conditions were initiated with the nitrate-amended column influent in order to mimic contaminated groundwater conditions distal from a nutrient injection well. Toluene continued to be effectively degraded (> 90%), and more than 25% of the benzene, 40% of the ethylbenzene, 50% of the meta- plus para-xylenes and 60% of the ortho-xylene were removed after several months of operation.     

Modeling and analysis of vias in multilayered integrated circuits

A method for modeling and analyzing vias the multilayered integrated circuits is presented. The model is based on microwave network theory. The whole via structure is divided into cascaded subnetworks, including a vertical via passing through different layers and transitions from the microstrip line and/or striplines to the vertical via. The parameters of each subnetwork are obtained from electromagnetic field analysis. Numerical results in the frequency domain and the time domain are presented. Validation of the model has been carried out by both measurements and finite-difference-time-domain (FDTD) modeling. The results show good agreement with the measurements in the frequency range for which the components of the experimental model are within specification. The time domain simulation results also agree well with the FDTD results     

Comment and discussion on digital processing of PD pulses

Some of the more salient aspects of the digital processing technology of PD signals are examined. Most of the efforts in this field are concentrated on the application of digital analyzers for pulse height analysis, pattern recognition and identification of the physical phenomena. It is demonstrated that errors in the signal processing unit can lead to dominant mistakes in the interpretation of the test results     

A comparison of two conformal methods for FDTD modeling

Two conformal finite-difference time-domain (FDTD) methods are considered, the contour path (CPFDTD) method of Jurgens et al. (see IEEE Trans. Antennas Propagat., vol.40, p.357, 1992) and the overlapping grid (OGFDTD) method of Yee et al. (see IEEE Trans. Antennas Propagat., vol.40, p.1068, 1992). Both TE and TM scattering from a two-dimensional (2-D), perfectly conducting circular cylinder are used to test the accuracy of the methods for curved surfaces. Also, TE and TM scattering from a 2-D, perfectly-conducting rotated square cylinder are used to test the accuracy for corners and edges. It is shown that the conformal method proposed by Yee et al. provide significant improvement in accuracy over the original FDTD algorithm for most of the geometries studied. However, implementation becomes more difficult as the geometries become more complex. The conformal method proposed by Jurgens et al. provide significant improvement in accuracy as well for most of the geometries studied. However, improvement does not occur for the TM case when the square cylinder is not aligned properly with the grid. Implementation of the CPFDTD method is relatively straightforward. For the majority of the cases studied, the OGFDTD method is more accurate than the CPFDTD method