二氧六环在CA低压反渗透膜中的作用机理

在低压醋酸纤维素一丙酮－甲酰胺反渗船舶这膜铸膜液体体系中，加入二氧六环使膜具有较小的初始平均孔径和较窄的孔径分布，二氧六环起到了调节高分子网络尺寸变小和均一化的作用。在１．０ＭＰａ下进料液浓度为１０００ｍｇ／Ｌ时，膜对Ｎａ２ＳＯ４、ＭＧＳＯ４分离率〉９６％，对ＮａＣｌ为８０％，Ｃ（ＮＯ２）２为８０％，ＭｇＣｌ２为７９％。平均透水率〉１．２５ｍｌ／ｃｍ＾２．ｈ适用于中低盐度水的脱盐软化。     

Optimal reaction conditions for the minimization of energy consumption and by‐product formation in a poly(ethylene terephthalate) process

We determined the optimal reaction conditions to minimize the energy cost and the quantities of by‐products for a poly(ethylene terephthalate) process by using the iterative dynamic programming (IDP) algorithm. Here, we employed a sequence of three reactor models: the semibatch transesterification reactor model, the semibatch prepolymerization reactor model, and the rotating‐disc‐type polycondensation reactor model. We selectively chose or developed the reactor models by incorporating experimentally verified kinetic models reported in the literature. We established the model for the entire reactor system by connecting the three reactor models in series and by resolving some joint problems arising when different types of reactor models were interconnected. On the basis of the simulation results of the reactor system, we scrutinized the cause and effect between the reaction conditions and the final quality of the polymer product. Here, we set up the optimization strategy by using IDP on the basis of the integrated reactor model, and the process variables with significant influence on the properties of polymer were selected as control variables with the help of a simulation study. With this method, we could refine the reaction conditions at the end of each iteration step by contracting the spectra of control regions, and the iteration process finally stopped when the profile of the optimal trajectory converged. We also took the constraints on the control variables into account to guarantee polymer quality and to suppress side reactions. Constituting six different strategies by setting weighting vectors differently, we examined the differences in optimal trajectories, the trend of optimality, and the quality of the final polymer product. For each of the strategies, we conducted the optimization to examine whether the number‐average degree of polymerization approached the desired value. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 993–1008, 2002     

Adsorption mode of ethyl pyruvate on platinum: an in situ XANES study

The adsorption of ethyl pyruvate on Pt(111) has been studied by in situ XANES measurements in the presence and absence of hydrogen. Depending on the hydrogen and ethyl pyruvate pressure, the C and O K‐edge spectra exhibit distinctly different angular dependence. Without hydrogen ethyl pyruvate is oriented preferentially perpendicular to the surface, indicating bonding via the O lone pairs. In the presence of hydrogen the mean orientation is more tilted towards the surface. Likely, ethyl pyruvate also interacts with Pt via its π system under these conditions. The observed angle‐dependent shift of the energy of the π* and σ* resonances indicates the coexistence of differently adsorbed ethyl pyruvate species. The experimental findings demonstrate the importance of the in situ approach for unraveling the adsorption mode of ethyl pyruvate in the enantioselective hydrogenation over cinchona‐alkaloid‐modified Pt. This revised version was published online in July 2006 with corrections to the Cover Date.     

The effect of nanoclays on the nucleation,crystallization, and melting mechanisms of isotactic polypropylene

The influence of organomodified nanoclay (montmorillonite) on the crystallization and melting mechanisms of isotactic polypropylene (iPP) was studied. Films of both neat polymer and clay nanocomposites were prepared after molecular weight optimization through melt extrusion. Products exhibited the tactoidlike morphology since no compatibilizers were used. The effect of introduction of nanoclay within the polymer was studied through isothermal crystallization and linear heating. The results indicated that low nanoclay concentrations induce the formation of the β‐crystalline structure, its formation being inhibited with high nanoclay contents. Dynamic nonisothermal bulk crystallization experiments indicated that nanoclays act as nucleating agents of iPP. Isothermal, bulk crystallization studies indicated that the crystallization process (induction time and crystallization kinetics) is proportionally accelerated by the nanoclay presence. There was also an accelerated formation of secondary crystallization when nanoclays were present in high concentrations. POLYM. ENG. SCI., 47:1889–1897, 2007. © 2007 Society of Plastics Engineers     

Modification of a carbon/carbon composite with a thermosetting resin precursor as a matrix by the addition of carbon black

Carbon/carbon composites were made through the pyrolysis of stabilized PAN felt and phenolic resin with the addition of 5 or 10 wt % carbon black to the matrix and then heat treatment at 600–2500°C. The effects of adding carbon black to the matrix precursor on the physical properties, microstructure, and mechanical properties of the resultant composites were investigated. Adding carbon black not only reduced the weight loss but also limited the shrinkage of the resultant composites. Adding carbon black also accelerated the formation of carbon basal planes in the matrix. At 2500°C, the crystalline stacking height in the composite with 10 wt % added carbon black was 200% greater than that with no additive. The flexural strength of the composite also increased from 15 to 42 MPa (almost 300%). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 333–337, 2006     

Synthesis and characterization of novel copolymers with acid‐labile ketal moieties derived from camphor

Novel diastereomeric acrylic ketal monomers derived from (+)‐camphor and (±)‐camphor were synthesized. To investigate the applications of the camphor derivatives on positive‐tone photoresists, the acrylic ketal monomers were copolymerized with methyl methacrylate, methacrylic acid, and n‐butyl methacrylate. The optical activities of the chiral monomers and polymers were all evaluated. After UV irradiation and postexposure baking, the optical activity of the polymers decreased because of the decomposition of the acid‐labile pendant chiral groups. The existence of alicyclic camphyl groups increased the etching resistance of the photoresists. The thermogravimetric properties of the copolymers, the exposure curves, the lithographic evaluation of the positive‐tone photoresists, and the effects of alicyclic groups on the plasma etching resistance of the copolymers were all investigated. A resolution of a line‐and‐space pattern of 0.3 μm was achieved. Acid‐catalyzed dehydration crosslinking was also found in this system. Sufficient UV irradiation and heat treatment could cause the acid‐catalyzed dehydration crosslinking of pendant carboxyl groups and thereby increase the efficiency of the thermal resistance of the polymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2969–2978, 2003     

基于WEB的高校教材评价体系的研究与实现

建立基于WEB的教材评价体系,可以及时有效地收集到学生、教师、专家对教材科学的评价意见,并且可以自动生成教材综合评级,为以后的教材编写和教材选取提供科学可靠的重要依据。本文为实现高效、科学、规范、准确的高校教材评价设计开发了一个简易高效的基于WEB的平台,系统基于MVC架构,采用JSP进行功能实现,数据库采用MySQL实现,WEB容器采用TomCat实现。设计中按逻辑划分为:模型(Model)、视图(View)、控制(Control)三个层次。     

国库信息系统监控方案的设计

该文以运行在银行端国库信息系统为例,以提高生产运行过程中运维自动化程度为目的,研究了系统运行中的联机交易、批量运行、应用可用性等特点.在对监控需求进行分析的基础上,设计了数据采集层、数据展示层、应用展示层3层系统监控结构,对采集到的运行数据进行处理.通过Web服务器、邮件系统、消息服务平台进行展示和报警,目前该系统设计可以充分满足实际运维需要,保障了国库信息系统的安全正常运行.     

Kinetic study of radical polymerization. II. Solid‐state bulk polymerization of sodium methacrylate by differential scanning calorimetry

The solid‐state radical polymerization of sodium methacrylate was investigated. It was initiated by azobisisobutyronitrile, which was used as a radical initiator. Differential scanning calorimetry (DSC) was used to observe the endothermic and exothermic transitions during the polymerization reaction. Structural studies were performed with the DSC thermograms and Fourier transform infrared and ultraviolet–visible spectra, and all of the results confirmed the progress of the reaction. The obtained data revealed that the polymerization reaction proceeded completely with a 100% conversion. ΔH of this reaction was calculated with various amounts of the initiator, and the peak temperatures were determined at different heating rates. The activation energy (19.7 kcal mol^?1) was also obtained by the Kissinger method for this type of solid polymerization reaction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1648–1654, 2003     

Rheological properties of hyperbranched polymer/poly(ethylene terephthalate) reactive blends

The rheological properties in solution, in shear and in uniaxial elongation of poly(ethylene terephthalate) (PET) reacted together with hyperbranched polymers (HBPs) were investigated. Two different PET grades, of low and high molecular weights, were compounded with sub‐ to over‐stoichiometric concentrations of HBPs of second and fourth pseudo‐generation, and subsequently subjected to a solid‐state polycondensation (SSP). The formation of microgels, which occurs at high HBP concentration, gave rise to a large increase in melt elasticity and a related decrease in melt strength. At low HBP concentrations, the complex viscosity of the unreacted HBP/PET was considerably reduced, thus demonstrating a lubrication effect of the HBP molecules. During SSP, the intrinsic and shear viscosities exhibited a gradual increase, which was similar for both PET and HBP/PET blends, and was correlated to an increase in molecular weight, through linear‐chain extension and branching reactions. The elongational viscosity of the reactive blends was also increased as a function of reaction time, and this increase was much larger in the case of the HBP/PET blends. A 400% increase in melt strength of the PET was obtained by combining SSP and trace amounts of an HBP of second generation, without any decrease in drawability.