反应堆流场分析的数值模拟

运用CFD分析工具对反应堆内的流场分布进行数值模拟,给出反应堆燃料组件入口处流场的速度和流量分配情况.通过对计算结果的比较分析,对核电厂反应堆内的流动特性有比较全面的了解,从而为反应堆堆内构件的设计和优化提供分析依据.结果表明反应堆内流场采用CFD技术进行模拟计算是可行的.     

一种优化内容适配技术的设计与实现

针对传统内容适配技术的特点和目前手机浏览器的发展现状,本文提出优先适配浏览器的内容适配技术。在传统内容适配技术上增加uA特征串和Accept特征串作为内容适配参数,并设计浏览器优先终端、终端优先Accept的适配规则。综合网络侧适配和终端侧适配优点,有效优化终端上的内容适配率,使得终端能够动态地、智能地针对不同的手机浏览器适配最佳的浏览版本。     

压力容器应力应变在线测量系统研究

应用Ｖｉｓｕａｌ Ｂａｓｉｃ软件开发了一套压力容器的应力采集与处理系统，将ＩＢＭ－３８６微机与ＹＪＤ－１７型应变仪联机，用微机来控制测点应变的采集与处理，并将大型结构分析软件ＳＡＰ５嵌入本系统。     

水性聚氨酯的合成及其改性的研究

研究了 n NCO/n OH、扩链剂 ( BD)及二羟甲基丙酸 ( DMPA)的含量对水性聚氨酯合成及涂膜性能的影响 ,确定了较佳的配方。并利用甲基丙烯酸酯类单体合成聚氨酯 -丙烯酸酯共聚复合乳液来改善水性聚氨酯的性能     

颜色管理的标准化（Ⅱ）

4L~*、a~*、b~*表色系统在使用上述x_(10)y_(10)色度图时,图中两个色度坐标点之间的距离相等,并不能代表人眼视差相等,即存在着不均匀性。为此,CIE1976年推荐了L~*、a~*、b~*均匀色空间,简称CIELAB色空间。目前L~*、a~*、b~*表色系统已得到广大使用者的认可。国内涂料行业在国家标准《漆膜颜色测量》中也规定采用本系统。本系统最大优点在于它的均匀性,更为接近人眼的视差,所以有利于色差比较。下面介绍L~*、a~*、b~*色空间及色差ΔEab*的计算。图5中的中央轴L~*表示明度,与L~*轴垂直的色空间剖切截面用a~*、b~*标度。a~*、b~*是以通…     

Improved mechanical properties of shape‐memory polyurethane block copolymers through the control of the soft‐segment arrangement

High‐performance shape‐memory polyurethane block copolymers, prepared with two types of poly(tetramethylene glycol) (PTMG) used as soft segments, were investigated for their mechanical properties. Copolymers with a random or block soft‐segment arrangement had higher stresses at break and elongations at break than those with only one kind of PTMG. Random copolymers with fewer interchain interactions showed higher elongation than block copolymers. All the copolymers had shape‐recovery ratios higher than 80%. In dynamic mechanical testing, the glass‐transition behavior clearly depended on the soft‐segment arrangement: random copolymers had only one glass‐transition peak, whereas block copolymers showed two separate glass‐transition peaks. Overall, the control of the soft‐segment arrangement plays a vital role in the development of high‐performance shape‐memory polyurethane. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2410–2415, 2004     

Synergic influence of a surfactant and ultrasonication on the preparation of soluble,conducting polydiphenylamine/silica‐nanoparticle composites

Conducting polydiphenylamine was used to encapsulate silica nanoparticles through the oxidative polymerization of diphenylamine in the presence of ultrasonic irradiation. The polymerization was performed in the presence of sodium lauryl sulfate as a surfactant. Experiments performed in the absence of ultrasound clearly demonstrated that the application of ultrasonication played multiple roles in the preparation of a composite of polydiphenylamine with silica nanoparticles. Ultrasonication dispersed the silica nanoparticles, converted sodium lauryl sulfate to lauryl alcohol, and augmented the dispersion of the silica‐nanoparticle/polydiphenylamine composite in an organic medium. Silica‐nanoparticle/polydiphenylamine composites were also prepared in the absence of ultrasound and/or sodium lauryl sulfate. The silica‐nanoparticle/polydiphenylamine composites were characterized with Fourier trans form infrared spectroscopy, ultraviolet–visible/near‐infrared spectroscopy, and thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3912–3918, 2006     

Does morphology stick? Tailored particle morphologies by swelling polymerization process

Structured dispersion particles suitable for pressure sensitive adhesives (PSA) were synthesized via swelling polymerization technique (EP 359562). Particles consisting of poly(n‐butyl acrylate) copolymerized with different types of carboxylic acids were used as seeds. The final particles were synthesized by swelling polymerization process, using 6 wt % styrene or 6 wt % methyl methacylate. The resulting particle morphology was analyzed by atomic force microscopy (AFM) and transmission electron microscopy (TEM). From previous works (Coll Surf A 2001, 183–185, 725–737; J Appl Polym Sci 2004, 91, 2610–2623) where two‐step emulsion polymerization was used on similar particles, it is expected that the particle morphology is affected by the polarity of the monomer used for swelling polymerization because of the phase compatibility (thermodynamic parameter). In this work, the seed particles used were always of a glass transition temperature (T_g) below polymerization temperature. The diffusion of the growing polymer chains from the swelling polymerization is therefore mainly affected by their own T_g and the influence of the carboxy groups on the chain length of the entering radicals (kinetic parameter). The different morphologies of the single particles are discussed qualitatively. The effects of reaction parameters are compared with the results given in the previous work. The structure of the corresponding dispersion films was characterized using AFM. Correlations to macroscopic properties such as the cohesive strength and peel adhesion to different substrates are discussed. The results are also compared with the application properties of the corresponding unmodified particles, statistical copolymers, and to blends with small sized PMMA or PS particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1444–1455, 2006     

现场总线技术在电力自动化中的应用

现场总线(Fieldbus)是当前自动化领域的热门话题，被誉为自动化领域的计算机局域网。信息技术的飞速发展．引起了自动化系统结构的变革，随着工业电网的日益复杂，人们对电网的安全要求也越来越高。现场总线控制技术作为一门新兴的控制技术必将取代过去的控制方式而应用在电力自动化中。     

Morphology of EVA based nanocomposites under shear and extensional flow

Shear and extensional rheological measurements were conducted in conjunction with laser light scattering (LLS) on ethylene‐vinyl acetate copolymer (EVA) nanocomposites. The materials were prepared by melt‐mixing EVA and commercially acquired layered silicates. Wide Angle X‐Ray Scattering (WAXS) was used to ascertain the degree of layer swelling. This could be attributed to the intercalation of polymer chains into the interlayer of the silicates. The nanocomposites prepared were determined to be predominantly intercalated in nature. In shear rheological tests, the nanocomposites exhibited an increase in viscoelastic properties compared to the pure EVA. The extent of this property enhancement was not as pronounced as had been reported in many instances with respect to other polymer nanocomposites. This could be attributed to the absence of a network structure normally observed in an exfoliated system. The extensional rheological tests showed an increase in extensional flow properties. This was confirmed by the LLS, which indicated that the filled systems had higher deformability than the unfilled one. Polym. Eng. Sci. 44:1220–1230, 2004. © 2004 Society of Plastics Engineers.