SNCP环带链的组网与维护

在实际传输网络结构中,有些站点由于条件限制不能与其它站点连接成环.过去采用通道保护(PP)环带链组网,环链网元间业务在环上没有保护;随着技术的发展,提出了子网连接保护(SNCP)环带链组网方式,确保环链网元间业务在环上得到保护,使网络的稳定性和可靠性大大提高.     

无线局域网采用的补偿码键控调制方式

采用补偿码健控（CCK）可以使IEEE802．11b无线局域网系统实现多速率通信，这是补偿码第一次用于调制。介绍了无线局域网的直接序列扩频（DSSS）的各种模式，着重介绍了无线局域网所采用的CCK调制方式，并对CCK调制的性能进行了理论上的分析。     

Simulation and design methodology for a 50-Gb/s multiplexer/demultiplexer package

A 50 Gb/s package for SiGe BiCMOS 4:1 multiplexer and 1:4 demultiplexer targeting SONET OC-768 serial communication systems is introduced in this work. The package was designed to facilitate bit-error-rate tests and constructed with high-speed coaxial connectors, transmission lines on ceramic substrate, ribbon bonds for chip-to-package interconnects, and a metal composite housing. Numerical simulations were conducted to guide the package design, and both small signal measurements and operational tests were performed thereafter to verify the design and modeling concepts. To keep the model structure under the existing computing capability, the simulation was segmented into three sections - coaxial connector to transmission line, transmission line alone, and transmission line to ribbon bond, and then the results were assembled to predict the performance of the entire package. The package was operated up to 50 Gb/s with low degradation to input digital waveforms and free of error.     

基于小波滤波的空中运动目标测量

本文研究了在空中运动目标跟踪中,基于小波变换的滤波方法.并运用仿真分析方法,比较了Kalman滤波与小波滤波的滤波效果,对仿真结果进行了讨论.     

偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

紫外激光诱导胃癌组织自体荧光的研究

本文测量了紫外激光（３０８ｎｍ）激发诱导正常组织和胃癌组织３１５ｎｍ－６００ｎｍ波段的自体荧光，发现胃癌组织在此荧光光谱不同于正常组织的荧光光谱。根据两者４的区别，可以把胃癌组织从正常组织中区分出来，这为诊断胃癌提供了一个新的思路。     

A numerical investigation on the geometry dependence of the crack growth resistance in CT specimens

The influence of the specimen thickness B and the ligament length b on the J _R -curves is numerically investigated for CT specimens. The thickness effect is taken into account with 2-D analyses by dividing a plain sided specimen into a plane stress part and a plane strain part. The fracture process is controlled by experimentally determined critical values of the crack tip opening displacement for crack growth initiation (CTOD_i) and the crack tip opening angle for stable crack growth (CTOA_C). It is shown that for the global behaviour of a plain sided specimen, the B/b ratio is essential. The difference between the geometry dependence of the initiation value of the J-integral and the geometry dependence of the slope of the J _R -curves is also shown.     

由三面投影图生成三维立体图的方法研究

针对创新设计中零部件的三维虚拟造型问题，提出了一种由二维投影图生成三维立体图的计算机化辨识方法。通过辨识简单三维立体的形状和空间位置，克服了二维图形中面的积聚性和零件之间不规则相贯和截交曲线的识别问题，进而实现了复杂组合形体的计算机化设计与造型。最后，以箱体类零件为例，在AutoCAD环境下利用VC 和ObiectARX开发工具编程验证了该方法的有效性。     

mc-Si:H/c-Si solar cell prepared by PECVD

Hetero-junction solar cells with an mc-Si:H window layer were achieved. The open voltage is increased while short current is decreased with increasing the mc-Si:H layer's thickness of emitter layer. The highest of V oc of 597 mV has obtained. When fixed the thickness of 30 nm, changing the N type from amorphous silicon layer to micro-crystalline layer, the efficiency of the hetero-junction solar cells is increased. Although the hydrogen etching before deposition enables the c-Si substrates to become rough by AFM images, it enhances the formation of epitaxial-like micro-crystalline silicon and better parameters of solar cell can be obtained by implying this process. The best result of efficiency is 13.86% with the V oc of 549.8 mV, J sc of 32.19 mA·cm-2 and the cell's area of 1cm2.