Effects of manufacturing defects on the mechanical properties of carbon fibre reinforced polyethersulphone laminates

The effects of defects on the mechanical properties of carbon fibre reinforced polyethersulphone laminates have been measured. The defects studied were cut fibre plies, omission of polymer films and local delamination produced by the inclusion of foreign matter. Of these it was found that only cut plies had a significant detrimental effect on the strength of a laminate. For specimens with two cut plies, the failure stress, tensile, flexural and compressive in the remaining continuous plies was the same as in the defect-free material, provided that the cut plies were widely separated. However the failure stresses were 15–18% lower in the continuous plies in the specimens containing two cut plies which were more closely spaced and in specimens containing four cut plies.     

The formation of zinc ferrite

The formation of zinc ferrite from zinc oxide and iron oxide is evaluated with high temperature X-ray diffraction experiments. Despite the problem of accurately determining the temperature of the part of the sample actually investigated, a kinetic analysis of the isothermal formation is shown to be possible. From these data the energy and entropy of activation are derived. It is further shown that neither corrections for grain growth during formation nor the presence of impurities have any influence on these results. On the other hand, the size of the reactant iron oxide particles is found to have a strong influence on both the energy and entropy of activation.     

Thermomechanical behaviour of composites

This paper derives the governing equations for the thermomechanical behaviour of composites. When the basic equations for the thermoelastic behaviour of solids were first derived in the nineteenth century several approximations were made. The effect of these assumptions are discussed and illustrated by the results of a simple laboratory test. The implications of this work on the analysis of impact damaged laminates are then discussed.     

Theory of propagating deformation bands

A model for propagating deformation bands is developed, based on a mechanical equation of state and on evolution equations for the structure parameters. It is shown that, contrary to normal deformation, it is necessary to discriminate between global parameters which depend solely on time elapsed and local parameters which are functions of the strain history. Correspondingly, two sets of equations are presented, one describing the development of the global parameters in the course of time, the other giving the evolution of the local state parameters in the course of deformation, i.e. as a function of strain. Measurable quantities derived from the first set are the load serrations and the band velocity, while the second set yields the flow stress and the strain profile of the propagating band.     

Elastic-Plastic Contact Damage in a Lead Lanthanum Zirconate Titanate

Spherical indenters were used to produce elastic-plastic contact damage in a lead lanthanum zirconate titanate (PLZT) under conditions of quasi-static and impact loading. The extent of radial cracking produced under both loading conditions showed good correlation with the response predicted by an earlier fracture mechanics analysis for quasi-static conditions. Calculated radial crack lengths corresponding to conditions of impact loading exhibited excellent agreement with experimentally measured values. The dynamic hardness of the PLZT was determined to be ∼ 1.5 times the quasi-static hardness. Differences in the radial crack lengths produced under the two loading conditions were attributed primarily to this difference in hardness response.     

Ultra-strong, well-apodised Bragg gratings in chalcogenide rib waveguides

The first ultra-strong, near-perfect, raised-apodised Bragg gratings in As/sub 2/S/sub 3/ chalcogenide rib waveguides using /spl lambda/=532 nm light and a modified Sagnac holographic writing setup are demonstrated. Good agreement is achieved between the experimental results and the numerical modelling of the gratings using the transfer matrix analysis for thin film structures.     

Physical parameters of fiber affecting passage from the rumen

Our objective was to review the factors that affect fiber passage from the rumen. Rumen residence time and passage from the rumen are important in control of intake, digestibility, protein metabolism, and protein escape. Physical factors associated with particle size and particle specific gravity affect passage from the rumen. Although particles of 5 cm may pass through the reticulo-omasal orifice, most particles leaving the rumen are smaller than 1 mm. Polypropylene ribbon cut into 7-cm lengths, introduced into the rumen, markedly reduced intake and were ruminated to fine particle size before being passed. Materials with specific gravity less than 1.0 are ruminated extensively and are passed slowly. As specific gravity of plastic particles increase, rumination of particles is decreased and passage is increased. Particles with specific gravities between 1.17 and 1.42 pass most rapidly. Increasing specific gravities further results in a decline in passage and a further lowering of rumination of particles. Natural hay and fresh forages are hydrated in the rumen, which causes functional specific gravity to increase. Some factors that affect rate of change of functional specific gravity of forages have been investigated. Small particle size, autoclaved rumen fluid, buffer solutions, and specific salts increased the rate of change of functional specific gravity of particles. Understanding of these factors may enable us to make better decisions in managing ruminant productions systems.     

Long-term working memory in the rat: Effects of hippocampally applied anisomycin.

The extent to which protein synthesis is involved in working memory was investigated with the protein synthesis inhibitor anisomycin (ANI). Male albino and Long-Evans rats were trained to perform accurately on a 12-arm radial maze when delays of 240 min were interposed between Choice 6 and Choice 7. Bilateral hippocampal cannulas were then implanted. Accuracy on Choices 7–22 was studied when ANI (80 μg/μl) or saline was injected either 30 min before Choice 1 or 5–20 min after Choice 6 in Exp I. Pretrial injection of ANI significantly impaired performance following the 240-min delay, whereas ANI injected during the delay had no such effect. In Exps II and III, the ANI-induced amnesia was replicated, and the temporal course of development of the amnesia was determined. Pretrial administration of ANI did not significantly affect retention after a 2-min delay but produced amnesia after delays of 15 min or longer. Data suggest that protein synthesis is important for the formation of temporary memories, provided the retention interval is long enough. It is suggested that working memory includes both short- and long-term components. Protein synthesis appears to be important for formation of the long-term component, but not the short-term component, of working memory. (31 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Production of zearalenone in vitro and in corn grains stored under modified atmospheres

The production of zearalenone by an isolate of Fusarium equiseti was studied in chemically defined medium and in corn grains stored under modified atmospheres. An increase in the concentrations of sucrose or xylose in Czapek's medium resulted in increased toxin production, while no toxin was produced when lactose was present in the medium. Methionine (10(-2) and 10(-3) M) and cystine (10(-3) M) added to Czapek's medium inhibited zearalenone production. When amino acids or nitrogen salts were added as the sole nitrogen source, only alanine, tryptophan and NH4Cl totally inhibited zearalenone production. Zearalenone production was inhibited almost completely in high-moisture corn grains (27%) kept under atmospheres enriched with high CO2 levels (60%, 40% or 20%) with either 20% or 5% O2. However, a lower amount of CO2 was needed to inhibit fungal development and toxin formation when a reduced O2 level was applied.     

Children's cognitive function and cell-phone electromagnetic fields

Several companies have made major strides in marketing cellular telephones to children within the past 12 months; more and more children are using cell phones as part of their daily routines. Some fear any disturbance to brain activity in children could lead to impaired learning ability or behavioral problems. Moreover, any lasting biochemical effects could have important consequences, especially in the young, who still have years of development ahead of them. Recently, two studies of the mental process of young users of standard 902 MHz Global System for Mobile Communication (GSM) cellular mobile telephones were published: one paper reported a slight trend toward speeding up of simple reaction time, whereas the other study did not detect any change in cognitive functions.