用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量

本文主要简述与运用AIR-C2H2原子吸收光谱法进行镉镍电池正极浸渍液中钴含量的测定，介绍了钴最佳测定条件及呈良好线性范围的浓度。同时对样品消化处理条件，在测定中样品的干扰因素进行了综合考虑，该方法具有很好的灵敏度，很好的重复性，干扰小，同时具有方法步骤简单，操作容易掌握等特点，对样品钴含量的测定，其相对标准偏差均小于1.0%（n=6），标准加入回收率均在97.0%～102.0%(n=5）范围内，结果表明，运用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量的分析，达到了实验室分析质量控制的要求，完全适用于镉镍电池正极浸渍液中钴含量的控制分析和样品系统分析。     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

FBOLES—outline of a frequency-based on-line expert system approach for fault diagnoses in nuclear power plants

The basic concept of a novel frequency-based on-line expert system (FBOLES) approach for on-line fault diagnoses in nuclear power plants has been presented previously. This paper reports further progress, and includes how to express the uncertainties of expert opinion in knowledge-bases and propagate then in inferences, and how to deal with imperfect knowledge-bases. It also describes the main elements of FBOLES and outlines how the system works under complex conditions including the dynamic behavior of signals during accidents, multiple failures, and on-line changes of plant operation mode. Its ability to diagnose root causes of accidents has been tested using the main steam and feedwater condensate systems of a full-scale, three-loop, 950 MW nuclear power plant simulated by the Tsinghua simulator. So far the results seem good.     

Synthesis of p‐aminophenol from the hydrogenation of nitrobenzene over metal–solid acid bifunctional catalyst

BACKGROUND: A single‐step conversion of nitrobenzene (NB) to p‐aminophenol (PAP) through catalytic hydrogenation is a widely used synthesis route for PAP. The main shortcoming of this route is the use of sulfuric acid for rearrangement of the phenylhydroxylamine (PHA) intermediate. In this paper, S₂O₈^2?/ZrO₂ (PSZ) solid acid and Pt‐S₂O₈^2?/ZrO₂ (Pt‐PSZ) bifunctional catalysts were prepared for the synthesis of PAP in non‐acid medium. RESULTS: Calcination temperature has a substantial effect on the acidity, structure and activity for PHA rearrangement of PSZ. The highest PAP yield was 33.8% over PSZ calcined at 823 K when the reaction was carried out in water at 423 K. A high PAP yield of 23.9% was achieved by a single‐step reaction of nitrobenzene over Pt‐PSZ bifunctional catalysts. CONCLUSION: PSZ solid acid exhibits high activity for PHA rearrangement. Perfect tetragonal ZrO₂ and much stronger acid sites play important roles in catalytic activity. Inhibiting the hydrogenation activity by reducing the amount of Pt loading on Pt‐PSZ can improve the competition of PHA rearrangement on acid sites with hydrogenation of PHA on metal active sites, resulting in better selectivity to PAP. Copyright © 2008 Society of Chemical Industry     

电子工业用高纯氮的生产

生产电子工业用高纯氮的制氮装置 ,其要点和难点是一氧化碳和氢的清除。采用一氧化碳转换炉和特殊的冷箱内流程组织 ,可以生产纯度为 99 9999%以上的高纯氮。对制取电子工业用高纯氮制氮装置与常规制氮装置加氮终端净化器两种流程进行了比较。     

CO毒化AB5型合金分形特征研究

研究了三种贮氢合金 L a Ni5、L a Ni4 .7Al0 .3、Ml Ni4 .5Al0 .5被 10 0× 10 - 6 CO毒化后的分形特征 ,求出这三种合金在含 10 0× 10 - 6 CO的氢中循环 ,分维分别为 0 .2 5 4 7、0 .170 9、0 .0 72 5。可以较好的解释合金被毒化的宏观现象。     

A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.     

小纸层析法快速测定^99mTc—HMPAO放射化学纯度

采用小纸层析系统１：１的氯仿／四氢呋喃展开剂分析＾９９ｍＴｃ－ＨＭＰＡＯ的放射化学纯度，并与两个薄层析系统和一个纸层析系统的方法作比较。配对ｔ检验结果表明两种方法测定的放射化学纯度无显著差异；放射化学纯度在７４．２％－９６．４％，小纸层析法与薄层／纸层析法紧密相关，回归公式ｙ＝１．００６ｘ－０．３２３。     

空间柔性机械臂三维动力学数值仿真

本文应用ｄ＇Ａｌｅｍｂｅｒｔ－Ｌａｇｒａｎｇｅ原理，对由基座、（ｎ－１）个柔性连杆及端部负载组成，相互用柱铰连接的柔性链式多体系统进行建模；对在空间技术中，具有一刚杆，两柔杆加上刚性负载所组成的三维机械臂系统，采用Ｇｅａｒ算法进行数值仿真。仿真结果比较符合实际，从而在柔性多体系统的数学模型为刚性常微分方程的情况下，为解决其数值仿真问题，特别是三维问题的数值仿真取得了进展。