The kinetics of desorption in the presence of a gas phase of the desorbing molecule: CO/Re(001)

TPD/Exchange from CO/Re(001) in a gas ambience showed that the absolute rate of desorption depends on the gas pressure and has a first plus second order rate law. It is proposed that desorption is a two step process from the adsorbed state to a stable intermediate which is itself weakly adsorbed.     

Effect of preparation conditions on the properties of a coal-derived activated carbon honeycomb monolith

Activated carbon honeycomb (ACH) monoliths were prepared by extruding of a mixture of bituminous coal and organic additives and subsequent carbonization and steam activation. Preparation parameters that were varied were carbonization temperature and activation time. The carbonization conditions were 500, 650 and 800 °C for 1 h and the steam activation conditions were 850 °C for 2, 4 and 6 h. The monoliths at various states were characterized by SEM, XRD, nitrogen adsorption and compression test. It was found that carbonization temperature has significant effects on pore size distribution and mechanical strength of ACH monoliths. The ACH monoliths prepared from high carbonization temperatures exhibited lower values of the BET surface area and total pore volume and higher value of the mechanical strength than those of the ACH monoliths prepared from low carbonization temperatures. This was attributed to the effect of high temperature carbonization that results in the formation of relatively less defective structures.     

超声波在聚合物成型加工中降粘作用的研究及应用

对超声波进行了简单的介绍,对其在聚合物成型加工中的降粘机理进行了一定的研究以及对它在聚合物成型加工中的应用进行了综述。在聚合物的成型加工中,超声波的合理施加可以大幅度的降低聚合物熔体的粘度,降低加工设备的要求和条件,更有利于高粘度聚合物的成型加工。     

CO还原液态铁氧化物的动力学研究

在1678K的温度下测定了用CO或CO与Ar的混合气体还原浮士体的反应速度浮士体放在纯铁坩埚中，还原速度是根据红外CO2气体分析仪所测出的CO2生成量来求出的．实验表明表现还原速度正比于气体中CO分压，并与气体流量的1．59次方有关，反应的前或其速度是由气相的传质速度所控制，化学反应的速度常数最小为60（g／atm·min·cm2）．     

A rheological model for iron oxide suspensions

We have examined the rheological properties of a Co-adsorbed γ-Fe₂O₃ magnetic suspension with polyurethane (PU) as a binder and methyl ethyl ketone (MEK) or cyclohexanone (CH) as a solvent. A Haake RV20 viscometer was used to measure the suspension viscosity and the vane method was adopted to determine the fluid yield stress. A rheological model which can be viewed as a combination of the Casson model and the Bingham model is proposed to describe the suspension viscosity. The effects of temperature, particle content, and binder concentration are included in the model.     

甲醇合成化学平衡常数的测定与推算

以低压法(5MPa)甲醇合成为背景,建立了气相法甲醇合成化学平衡常数的实验测定系统,测定了不同温度和压力下,CO、CO_2同时加H_2合成CH_3OH反应的平衡组成及化学平衡常数K_p,同时以实验结果为依据,对K_p的理论推算进行了探讨,其中对文献中计算以逸度表示的平衡常数K_f的各种方程进行了比较。结果表明,基于Cherednichenko的K_(f,Ⅰ)和Bissett的K_(f,Ⅱ),采用修正的SRK方程,对K_p的推算取得了满意的结果。     

微粉对矾土基超低水泥浇注料性能的影响

以高铝矾土熟料为主原料 ,加入 2 %的铝酸钙水泥及总量为 6 %的Al2 O3 微粉和SiO2 微粉 ,配制了矾土基超低水泥浇注料 ,研究了微粉对浇注料的烧结性能、力学性能及热震稳定性的影响。结果表明 :(1 )SiO2 微粉对浇注料的促烧结作用优于Al2 O3 微粉。这是因为与Al2 O3 微粉相比 ,由气相沉积生成的SiO2微粉的粒度小 ,比表面积大 ,活性较高。 (2 )随着SiO2微粉加入量的增加 ,在 1 1 0 0℃和 1 4 0 0℃处理后的常温强度以及在 1 30 0℃和 1 4 0 0℃下的高温抗折强度和抗热震性明显提高。这是由于引入的SiO2 微粉在高温下与Al2 O3 反应生成的针状莫来石穿插进入刚玉骨架 ,起着明显的强化和韧化作用     

经济全球化——涂料行业面临的挑战和机遇(续)

<正>2.3海洋和重防腐涂料全球贸易持续增长对船舶和集装箱的需求推动了造船业的发展。其中对超大型(>30万t)油轮、液化天然气(LNG)以及化学品船的需求尤其迫切。我国去年进口的1.3亿t原油中,中国船队仅运输13%,从国家能源安全考虑,在2010年要求国内运力达到65%以上。因此,中国远洋和其他船运公司要求增加至少90艘、大于30万t级的油轮。全球造船中心集中在东亚,日本、韩国、中国总和占世界     

用RAP法引上技术生长KCL晶体

用RAP法(reactivo atmosphere process)处理KCl熔体,在不改变生长气氛和RAP继续处理的情况下,提拉生长KCl晶体,以解决高纯、大尺寸、生长速度快、成品率高和有较大经济效益的问题。