Zinc doped Fe2O3 for boosting Electrocatalytic Nitrogen Fixation to ammonia under mild conditions

Artificial nitrogen fixation is emerging as a promising approach for synthesis of ammonia at mild conditions. Inspired by biological nitrogen fixation based on bacteria containing iron, zinc doped Fe₂O₃ nanoparticles are proposed as an efficient and earth abundant electrocatalyst for converting N₂ to NH₃. In neutral media, it achieves a maximum Faradaic efficiency (FE) of 10.4% and a large NH₃ yield rate of 15.1 μg h^?1 mg^?1_cat. at ?0.5 V vs. reversible hydrogen electrode. This catalyst also exhibits excellent selectivity and stability. Theoretical calculations suggest the reaction follows the associative enzymatic mechanism and it has a barrier of as low as 0.68 eV.     

现行规范对“锁住区”起点高度简化处理的影响

通过工程实例及理论分析 ,对横向风振“锁住区”问题进行了探讨 ,对《建筑结构荷载规范》(GB5 0 0 0 9— 2 0 0 1 )中有关这一方面内容存在的一些问题进行了分析 ,希望对工程设计人员能有所帮助     

高柔韧性尼龙1010材料的制备

对尼龙1010/NBR/增塑剂体系进行了系统研究,发现在挤出机中环氧扩链剂可以对尼龙进行扩链反应,且环氧树脂对尼龙1010的扩链反应活性较高,扩链效果比较明显;N-丁基苯磺酰胺是尼龙的良好增塑剂,经增塑、增韧后可以使经扩链后的尼龙1010柔韧性有明显提高.采用SEM和TEM对所制备的材料进行了形貌分析,发现用NBR增韧尼龙,对于不同的基体材料,橡胶粒子的形貌有很大不同,粒子由增韧纯尼龙的椭球形变为在增塑尼龙基体中不规则的形状.     

A new way for constructing high accuracy shock-capturing generalized compact difference schemes

The generalized compact (GC) schemes and some of their important properties are presented. And a new way for constructing high order accuracy and high-resolution GC schemes is presented. The schemes constructed by using this way could satisfy some principles and demands prescribed in advance to ensure some desired properties to the schemes, such as the principle about suppression of the oscillations, the principle of stability, the order of accuracy and number of scheme points, etc. As two examples, a three-point third-order compact scheme and a three-point fifth-order GC scheme satisfying the principle about suppression of the oscillations and the principle of stability are described in this paper. Numerical results show that these schemes are shock-capturing. The time-dependent boundary conditions proposed by Thompson are well employed when the algorithm is applied to the Euler equations of gas dynamics. Fourier analysis shows that the resolution characteristics are spectral-like.     

Prolog逻辑程序的测试方法

Prolog逻辑程序设计语言具有不同于传统程序设计语言的特点.本文根据测试Prolog程序的实践,提出了一系列为Prolog程序生成测试用例的准则.按这些准则测试实际程序效果良好.这是在逻辑程序测试新领域迈出的一步.     

钢／铝合金液固相复合工艺的研究

通过正交试验研究了各工艺量数以钢／铝合金液固相复合性能的影响，最佳工艺条件为铝合金液体温度７９０℃，钢板表面处理为酸洗＋钢刷＋５％的氟钛酸钾助焊剂，复合压力为３９．２ＭＰａ，组织观察表面界面脆性化合物的形成是导致结合强度降低的一个重要因素。     

夏季面漆起泡的预防

面漆漆膜在夏季潮湿天气下成膜后3—5天，漆膜表面易形成米粒状的漆泡，针对漆泡的现象，寻找其形成的机理，根据起泡的机理采取预防面漆起泡的措施。     

Processing and microstructural evolution of powder metallurgy Zn-22 Pct Al eutectoid alloy containing nanoscale dispersion particles

The present article deals with the processing and microstructural evolution of powder metallurgy (PM) Zn-22Al pct eutectoid alloy. The powder material was produced through inert gas atomization and then cryomilled in liquid nitrogen. The milled powder particles were consolidated by hot isostatic pressing (“hipping”) followed by thermomechanical treatment, resulting in a two-phase microstructure. The microstructures were characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The principal processing factors and microstructural characteristics associated with the major processing steps, including spray atomization, mechanical milling (MM), consolidation, and heat treatment, were evaluated and discussed. Hot isostatic pressing and extrusion followed by heat treatment to produce the superplastic structure (Al-rich phase and Zn-rich phase) are effective in elimination porosity. A TEM examination of the microstructure of the alloy after processing reveals the presence of nanodispersion particles that are not uniformly distributed. The formation of the dispersions was attributed to the interaction between the powder material (primarily Al phase) and environmental elements such as oxygen and nitrogen during milling. Moreover, the size and distribution of the dispersions present in the bulk material met the anticipated requirements for serving as inhibitors for grain growth and barriers for dislocation movement. The TEM observations on crept specimens reveal extensive dislocation/dispersion interactions.     

An investigation of water-gas transport processes in the gas-diffusion-layer of a PEM fuel cell by a multiphase multiple-relaxation-time lattice Boltzmann model

In order to study water-gas transport processes in the gas-diffusion-layer (GDL) of a proton exchange membrane (PEM) fuel cell system, a multiphase, multiple-relaxation-time lattice Boltzmann model is presented in this work. The model is based on the mean-field diffuse interface theory and can handle the multiphase flows with large density ratios and various viscosities. By using the standard bounce back boundary condition and an approximate average scheme for the non-slip and wetting boundary walls, respectively, detailed liquid-gas transportation in the GDL, in which exact boundary condition is difficult to be implemented, can be simulated. Unlike most of lattice Boltzmann methods based on the Bhatnagar–Gross–Krook collision operator, the present model shows a viscosity-independent velocity field, which is very important in simulating multiphase flows where various viscosities coexist. We validate our model by simulating a static droplet on a wetting wall and compare with theoretical predictions. Then, we simulate a water-gas flow in the GDL of a PEM fuel cell and investigate the saturation-dependent transport properties under different conditions. The results are shown to be qualitatively consistent with the previous numerical and theoretical works.     

政府采购领域治理商业贿赂的难点与对策探讨

一、从政府采购相关利益人心态分析当前治理商业贿赂的难点当前治理政府采购领域商业贿赂采取的主要工作方法是通过调查摸底、对照检查、处理整改和评估验收来进行，这种方式有效与否在很大程度上取决于相关利益人（主体）对此项工作的关注度和认识程度。然而．简单分析政府采购全过程中相关利益人的心态不难看出，单靠这种方法较难使商业贿赂的治理取得实质性效果。