Annealing process of fine grained co-stabilised (Y,Mg)-PSZ/MgAl2O4 ceramics

Abstract

Co-stabilised (Y,Mg) partially stabilised zirconia (PSZ) ceramics with MgAl₂O₄ spinel additions were produced, with industrial zirconia as the main starting material. Powders were prepared using a mechanical milling–mixing process. The effect of the annealing process on the mechanical properties, phase compositions, and microstructure of fine grained PSZ ceramics was investigated.     

Effect of postmolding heat treatment on in vitro properties of a polyanhydride implant containing gentamicin sulfate

A polyanhydride implant containing gentamicin sulfate was fabricated using a laboratory-scale injection-molding machine. After injection molding, the implants were subject to heat treatment at 60°C for various time periods with or without nitrogen protection. The impact of this heat treatment on the in vitro properties of the implants including copolymer molecular weights, mechanical properties, and in vitro drug-release profiles was investigated. This heat treatment caused a drastic drop in the molecular weight of the copolymer. Heating without nitrogen protection resulted in the hardening of the implant, but heating in the presence of nitrogen rendered the implant less rigid. It was also found that a faster in vitro drug release profile was shown by implants heated without nitrogen protection and a pronounced slowing down in drug release was exhibited by implants heated with nitrogen protection.     

X-ray CCD calibration system using fluorescent lines

We have developed a CCD calibration system using fluorescent X-ray lines with energies ranging from 1.49 keV (Al K) to 11.2 keV (Se K). The absolute X-ray flux is calibrated by a gas proportional counter, while the emerging spectra are monitored by solid-state silicon detectors. In order to suppress contaminating X-rays in the fluorescence spectra, mechanical collimators were set in the X-ray beam line, high-purity targets for fluorescent lines were used, and band-pass filters were put on the X-ray beam line. As for the purity of the fluorescent X-rays, the typical purity achieved was 98%.     

Transport and Magnetic AC Losses in Ag/Tl-1223 Tape and the Effect of Mechanical Damage

In this paper we present the results of AC loss measurements on silver clad monocore tapes of Tl-1223 prepared by the powder-in-tube method. Losses arising from an external AC magnetic field are compared with those generated by AC transport currents (self-field losses). Critical current densities are derived from magnetic loss data and compared with those measured by the four point transport method. It was found that mechanically induced stresses (introduced by bending) only have a significant effect on the transport losses, via the critical current degradation. Such changes are not seen in measured magnetic losses, which are independent of mechanical stress, and remain unchanged, at least in the stress range used in our experiment.     

Manual Therapy Facilitates Homeostatic Adaptation to Bone Microstructural Declines Induced by a Rat Model of Repetitive Forceful Task

The effectiveness of manual therapy in reducing the catabolic effects of performing repetitive intensive force tasks on bones has not been reported. We examined if manual therapy could reduce radial bone microstructural declines in adult female Sprague–Dawley rats performing a 12-week high-repetition and high-force task, with or without simultaneous manual therapy to forelimbs. Additional rats were provided 6 weeks of rest after task cessation, with or without manual therapy. The control rats were untreated or received manual therapy for 12 weeks. The untreated TASK rats showed increased catabolic indices in the radius (decreased trabecular bone volume and numbers, increased osteoclasts in these trabeculae, and mid-diaphyseal cortical bone thinning) and increased serum CTX-1, TNF-α, and muscle macrophages. In contrast, the TASK rats receiving manual therapy showed increased radial bone anabolism (increased trabecular bone volume and osteoblast numbers, decreased osteoclast numbers, and increased mid-diaphyseal total area and periosteal perimeter) and increased serum TNF-α and muscle macrophages. Rest, with or without manual therapy, improved the trabecular thickness and mid-diaphyseal cortical bone attributes but not the mineral density. Thus, preventive manual therapy reduced the net radial bone catabolism by increasing osteogenesis, while rest, with or without manual therapy, was less effective.     

Selective Recovery of Cadmium,Cobalt, and Nickel from Spent Ni–Cd Batteries Using Adogen® 464 and Mesoporous Silica Derivatives

Spent Ni–Cd batteries are now considered an important source for many valuable metals. The recovery of cadmium, cobalt, and nickel from spent Ni–Cd Batteries has been performed in this study. The optimum leaching process was achieved using 20% H₂SO₄, solid/liquid (S/L) 1/5 at 80 °C for 6 h. The leaching efficiency of Fe, Cd, and Co was nearly 100%, whereas the leaching efficiency of Ni was 95%. The recovery of the concerned elements was attained using successive different separation techniques. Cd(II) ions were extracted by a solvent, namely, Adogen^® 464, and precipitated as CdS with 0.5% Na₂S solution at pH of 1.25 and room temperature. The extraction process corresponded to pseudo-2nd-order. The prepared PTU-MS silica was applied for adsorption of Co(II) ions from aqueous solution, while the desorption process was performed using 0.3 M H₂SO₄. Cobalt was precipitated at pH 9.0 as Co(OH)₂ using NH₄OH. The kinetic and thermodynamic parameters were also investigated. Nickel was directly precipitated at pH 8.25 using a 10% NaOH solution at ambient temperature. FTIR, SEM, and EDX confirm the structure of the products.     

Localization of glycosaminoglycans and CD44 in the human lacrimal gland

Recent analyses of tears indicate the presence of glycosaminoglycans as their components, but their origin remains unknown. To further understand the origin of these tear components, we investigated by immunohistochemical techniques the localization of glycosaminoglycans and CD44 human lacrimal glands obtained from 20 cadavers at autopsy. Monoclonal antibodies to CD44, a receptor for hyaluronic acid, dermatan sulfate, chondroitin sulfate, and keratan sulfate were applied to the tissue. Hyaluronic acid binding region was also used for the staining of hyaluronic acid. By light microscopy, immunoreactivity for CD44 was mostly detected on the baso-lateral membrane of acinar and ductal cells, and the vascular endothelium in the interstitium. Positive staining of hyaluronic acid was associated intensely with the basal membrane of acinar and ductal cells and weakly, faintly or not at all with their lateral membrane. Positive staining of hyaluronic acid and immunoreactivity for dermatan sulfate were detected in interstitial fibrous structures; particularly, the former was intense in the perivascular fibrous structures, and the latter along the periparenchimal fibrous structures. Immunoreactivity for chondroitin sulfate and keratan sulfate was seen in some acinar cells and the acinar and ductal lumen. By electron microscopy, immunogold particles indication chondroitin sulfate sulfate or keratan sulfate labeled secretory granules of the acinar cells. Considering the fact that CD44 is a receptor molecule for hyaluronic acid, the association of hyaluronic acid with the basal membrane and weakly or faintly with the lateral membrane of acinar and ductal cells may be attributed to the expression of CD44 on the baso-lateral membrane of the cells. Moreover, the presence of immunoreactivity for chondroitin sulfate and keratan sulfate in secretory granules of acinar cells and their lumens suggests that tears from the lacrimal gland contain these glycosaminoglycans.     

Transfection of glutathione S-transferase (GST)-pi antisense complementary DNA increases the sensitivity of a colon cancer cell line to adriamycin, cisplatin, melphalan, and etoposide

The goal of this study was to demonstrate that glutathione S-transferase (GST)-pi is directly involved in the intrinsic and acquired resistance of cancer cells to anticancer drugs. To this end, GST-pi antisense cDNA was transfected into the cultured human colon cancer cell line M7609, which expresses an innately high level of GST-pi and shows intrinsic drug resistance, and into an M7609 strain with acquired resistance to Adriamycin (ADR;i.e., M7609/ADR cells). The changes in the sensitivity of these transfectants to various anticancer drugs were investigated. The intracellular concentrations of GST-pi in M7609/anti-1 cells and M7609/anti-2 cells, two clones that were established by transfection of GST-pi antisense cDNA into M7609 cells, were decreased to approximately half of those detected in the parent cells (M7609) and in the control cells transfected with vector alone (M7609/pLJ). The sensitivities of the antisense transfectants in relation to ADR, cisplatin, melphalan, and etoposide were increased -3.3-fold, 2.3-fold, 2.2-fold, and 2.1-fold, respectively, compared with those of M7609 and M7609/pLJ. On the other hand, the sensitivities of the antisense transfectants to Taxol, vincristine, 5-fluorouracil, and mitomycin C were not significantly changed. Similarly, the transfection of antisense cDNA into M7609/ADR cells resulted in the reduction of intracellular GST-pi concentration (by about half) and an increased sensitivity to ADR (4.4-fold), but no increase in 5-fluorouracil sensitivity. Thus, GST-pi is considered to be a multidrug resistance factor that is responsible for both the intrinsic and acquired resistance of cancer cells to anticancer drugs such as ADR, cisplatin, melphalan, and etoposide.