Speciation of selenium in plant water extracts by ion exchange chromatography-hydride generation atomic absorption spectrometry

Determination of selenium (Se) speciation in plants is important in studying the bioavailability and toxicity of Se in Se-contaminated soil/sediment. In this study, we used an anion exchange resin (Dowex 1-10X) to separate Se into non-amino acid organic Se, Se-amino acids, selenite (Se [IV]) and selenate (Se [VI]) in a plant (Stanleya pinnata) extract. The hydride generation atomic absorption spectrometry (HGAAS) was used to determine concentrations of these Se compounds in plant extracts. Results showed that Se compounds can be quantitatively separated by the resin column. Recovery of five spiked standard Se compounds (trimethylselenonium ion (TMSe+), dimethylselenoxide (DMSeO), selenomethionine (Semet), Se [IV] and Se [VII]) in the plant extract ranged from 92.9 to 103%. Water extractable Se accounted for 60.4-72.6% of the total Se in the plant. Among the soluble Se compounds in the plant extract, Se-amino acids were 73-85.5%, Se [VI] ranged from 7.5 to 19.5% and non-amino acid organic Se was less than 7%. Se [IV] in most samples was below the detection limit (1 microg/g). This study showed that considerable amounts of the accumulated Se [VI] in the plant was metabolized to Se-amino acids during growth of the plant.     

The long-term evolutions and the regional characteristics of atmospheric methane concentrations in Nagoya, 1983-1997

This study provides information on the long-term evolutions of the atmospheric methane (CH4) concentrations in Nagoya City, Japan, which were analyzed by using the continuous monitoring data observed at the eight observatory stations for 1983-1997. The 15-year records of the atmospheric CH4 concentrations were examined by means of a time-series analysis using a fast Fourier transform with a low-pass filter to elucidate the seasonal cycles and the long-term trends. The annual averages of the CH4 concentrations in Nagoya were 1.85 ppmv (parts per million by volume), 1.91 ppmv, and 1.90 ppmv in 1988, 1995 and 1997, respectively. Moreover, the annual average growth rate showed a drastic decrease from 17 ppbv (parts per billion by volume) year(-1) in 1992 to 2 ppbv year(-1) in 1993, and further down to 7 ppbv year(-1) in 1997. Comparison of the atmospheric CH4 records in Nagoya with those in global air of the northern hemisphere observed at Mauna Loa observatory in Hawaii, USA, allows us to estimate the excess concentration of CH4 in the urban atmosphere of Nagoya, which was 0.17 ppmv in 1988 and 0.15 ppmv in 1997. On a local scale, the atmospheric CH4 concentrations in the northern part of Nagoya City increased until 1992 and then gradually decreased from 1993 to 1997, although those in the south-western urban areas constantly increased at the averaged growth rate of 13 ppbv year(-1) for 1988-1997. The variation of the long-term trends of the CH4 concentrations in Nagoya may be ascribed to the emission changes from the CH4 sources due to the human activities such as waste dumping and landfills.     

The effect of depositional history on contaminated bed sediment stability

Experiments were conducted in an annular flume using a commercially available kaolinite clay as well as contaminated bed sediment from Hamilton Harbour (Ontario) to assess their stability against erosion. Critical shear stress for erosion was measured under different conditions of bed formation (quiescently deposited beds and shear deposited beds) as well as with and without the presence of a biostabilized bed. Results suggest that a biostabilized bed and a bed formed under a flowing condition, similar to a river scenario, will be more resistant against erosion than will a non-biostabilized bed and a bed formed under quiescent conditions. Up to three cycles of erosion and flocculation/deposition were observed to occur within one experiment. These results suggest that the depositional history and biostabilization of river bed sediments need to be seriously considered within sediment and contaminant transport models if meaningful estimates of sediment and contaminant source, fate and effect are to be generated and used for the management of our aquatic ecosystems.     

Forschungspartnerschaft Grundlagenorientierte Mineralrohstoffforschung – ein neues Instrument der Rohstoffforschung

By establishing the “Minerals resources research partnership” a new innovative financing instrument was developed, which allows to finance small research projects in the forefront of the ‘classical’ research programs. The partnership is executed responsibly by the Geological Survey of Austria co-operating with universities and other partners on commodity research topics. The paper briefly describes the eligible key aspects, guidelines and the modality of granting of the funds.     

Microstructure-Based Estimation of Strength and Ductility Distributions for $$\alpha +\beta $$ Titanium Alloys

Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.

     

Substrate Stimulated Orientation for Pure Aluminum

Oriented materials are of great importance, but their formation is rarely described. Here, nine Al/Al₂O₃ systems were designed to identify the dominant factors. Electron back-scattered diffraction indicates that the new Al crystal(s) with one or multiple orientation(s) can be stimulated by one single-crystal Al₂O₃ substrates. Synchrotron radiation diffraction shows that the preferred orientation(s) is/are determined based on the initial stage of the liquid–solid transition. The nonpreferred orientation can be suppressed through competition.

     

The Influence of Hydrogen Concentration in an Ar–H2 Mixture on the Electrical Properties of Solid Oxide Fuel Cells

Powder Metallurgy and Metal Ceramics - Fuel cells are today among the most efficient and environmentally friendly devices for the production of electricity. They are developing rapidly and are...     

Design and optimization of small hydropower systems in water distribution networks under consideration of rehabilitation measures

Small hydro power systems (SHPSs) are increasingly installed in water distribution systems (WDSs). With only minor adaptations in a WDS, pressure surplus can be utilised. In such systems, a water surplus is also often available. In this work, water consumption data of a real Alpine WDS over one year are used as an input for an Epanet2 long-term simulation model to assess such a SHPS. In addition, the combinations of pressure and water surplus devices in a WDS are investigated. For such a specific investigated case, the yearly profit of 1750 € for a single SHPS could be increased to 3550 € when combining two interacting devices. Further, necessary and upcoming rehabilitation measures are investigated concerning their positive impact on the energy production potential and how additional costs (e.g., higher diameters (200 mm instead of 125 mm)) can be compensated by additional profits from energy production (maximum 5250 € per year).     

Removal of Lissamine Red From Wastewater Using Waste Materials

Feasibility of a waste material, flyash, as a material for purification of wastewater containing Lissamine Red has been studied. Effects of time and concentration, temperature and pH on the removal of the dye have been studied. Lower concentrations favour the uptake of dye from water and the maximum removal was observed at a dye concentration of 20 mgL m 1 , 30°C, pH of 7 and adsorbent particle size of 53 µm. Dynamics of the uptake was studied using Lagergren's equation. The mass transfer coefficient was found to be 0.05 cmmin m 1 at a concentration of 20 mgL m 1 , 30°C and 53 µm particle size.