Novel technique for SiO2 formed by liquid-phasedeposition for low-temperature processed polysilicon TFT

A technique for SiO₂ formation by liquid-phase deposition (LPD) at nearly room temperature for low-temperature processed (LTP) polysilicon thin-film transistor (poly-Si TFT) was developed. LPD SiO₂ film with a lower P-etch rate shows a dense structure. LPD SiO₂ also exhibits good electrical characteristics. LTP poly-Si thin-film transistors (TFTs) with LPD SiO ₂ as the gate insulator have been fabricated and investigated. Their characteristics indicate performance adequate for their use as pixel transistors in liquid crystal displays (LCDs)     

A novel double-circuit-rotor balanced induction motor for improvedslip-energy recovery drive performance. I. Modeling and simulation

A new construction for the rotor windings of balanced wound-rotor induction motors employed in the slip energy recovery drives is proposed, in this paper, to reduce the time harmonics which are commonly generated in the machine. The proposed machine has a double-circuit in the rotor. One circuit is star connected while the other is delta connected. Each of these two circuits is connected to a diode-bridge rectifier to achieve a twelve-pulse operation characteristics. The main objective of this paper is to develop a new model which is capable of simulating the proposed machine, neglecting nonlinearities due to magnetic saturation, and its associated converters. Such a model is further complicated due to the presence of the two rotor circuits and their mutual interaction     

Evaluating design metrics on large-scale software

Design-quality metrics that are being developed for predicting the potential quality and complexity of the system being developed are discussed. The goal of the metrics is to provide timely design information that can guide a developer in producing a higher quality product. The metrics were tested on projects developed in a university setting with client partners in industry. To further validate the metrics, they were applied to professionally developed systems to test their predictive qualities. The results of applying two design metrics and a composite metric to data from a large-scale industrial project are presented     

The importance of electrochemistry-related etching in thegate-groove fabrication for InAlAs/InGaAs HFETs

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/lnGaAs heterojunction field-effect transistors (HFETs). The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching. The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching. The existence of an electrochemistry-related etching component, which arises when the ohmic electrodes are present during recess etching, is considered to be responsible for these behaviors     

Learning long-term dependencies with gradient descent is difficult

Recurrent neural networks can be used to map input sequences to output sequences, such as for recognition, production or prediction problems. However, practical difficulties have been reported in training recurrent neural networks to perform tasks in which the temporal contingencies present in the input/output sequences span long intervals. We show why gradient based learning algorithms face an increasingly difficult problem as the duration of the dependencies to be captured increases. These results expose a trade-off between efficient learning by gradient descent and latching on information for long periods. Based on an understanding of this problem, alternatives to standard gradient descent are considered.     

Controversy: Mechanical fatigue or hardening of rocks after their excavation

It is pointed out that strength value of rock samples changes with time after sample excavation from a quarry. Three main stages of strength variability with time are distinguished: 1-the stage of hardening connected with increase in the compression strength; 2-stage of equilibrium of the antagonistic processes: hardening and mechanical fatigue; 3-stage of manifestation of mechanical fatigue. Mechanical fatigue is favorable to the manifestation latent weakness surface to new crack formation and at last to total disintegration in rock samples.     

Ends,Means and Innovation Management

The management of innovation inevitably implies the management of uncertainty. Research and practise clearly indicate that judgements about the size and the nature of this are often inaccurate. This can result in poor performance against expectations and in some cases in complete failure. In this paper it is argued that prior analysis of the type of uncertainty can help to improve the success rate and/or reduce the time to completion. Early signs that discontinuation, or a significant change in direction, might be called for are also highlighted by this analysis.     

Leiomyomatosis peritonealis disseminata. Two case reports

AIM: To study the action of quercetin (Que) on inhibiting platelet aggregation. METHODS: Active oxygen free radicals produced by xanthine/xanthine oxidase (Xan/XO) reaction was used, platelet aggregation was determined by the turbidimetric method, and the Xan/XO oxyradicals generating reaction by luminol-dependent chemiluminescence (Che) method. RESULTS: Active oxygen free radicals enhanced the platelet aggregation induced by ADP 1.6 mumol.L-1. The rate of maximal aggregation increased from 29%-38% for ADP to 59%-70% for ADP + Xan/XO. The enhancement was abolished by the treatment of platelet-rich plasma (PRP) with Que 650 mumol.L-1 or hydrocortisone (Hyd) 900 mg.L-1. Both Que and Hyd scavenged the active oxyradicals in vitro. The Che was decreased by 75.7% (Que 4 mumol.L-1) and 79.0% (Hyd 900 mg.L-1) as compared with control. CONCLUSION: Active oxygen free radicals participated in the platelet aggregation, and scavenging oxyradicals by Que was one of mechanisms of inhibiting platelet aggregation.